* feat(FlightTaskAuto): add RC yaw override during Auto modes
* feat(FlightTaskAuto): disengage RC yaw nudge on flight-mode switch
* docs: document MPC_AUTO_RC_YAW in MC Auto mode pages
Describe the RC yaw nudge (MPC_AUTO_RC_YAW) on the Mission page.
Add parameter rows to the Hold and Land pages where MPC_LAND_RC_HELP takes
precedence over it for yaw, and document MPC_LAND_RC_HELP there too.
* feat(FlightTaskAuto): updated param description to warn against COM_RC_OVERRIDE disabled
The long description recommends to have a switch on the RC to change to Position mode
* fix(FlightTaskAuto): unified yaw nudging with new MPC_AUTO_NUDGING parameter
* docs(FlightTaskAuto): MPC_AUTO_RC_YAW and MPC_LAND_RC_HELP parameters were replaced by the unified MPC_AUTO_NUDGING bitmask
* fix(parameters): migrate MPC_LAND_RC_HELP to MPC_AUTO_NUDGING bit 1
* docs(1.18): move stick override and add nudging changes
---------
Co-authored-by: Matthias Grob <maetugr@gmail.com>
Document the Official PX4 Developer Kit program: a new top-level
Developer Kits section listing the certified kits (ModalAI Starling 2
Max, DroneBlocks DEXI 5, Holybro X500 v2), a new DEXI 5 page, and a
manufacturer-facing page describing the program requirements, benefits,
and eligibility.
Restructure the hardware navigation so all certified kits live in one
place instead of being split across Complete Vehicles and Kits, drop
discontinued build guides from the sidebar (still linked from the kit
build guides page), and group the manufacturer guides under a new
Manufacturers section in Development > Hardware.
Signed-off-by: Ramon Roche <mrpollo@gmail.com>
Add a test_and_ci page covering the PX4_ASAN / PX4_TSAN / PX4_MSAN / PX4_UBSAN
build variables, the Linux `sudo sysctl vm.mmap_rnd_bits=28` workaround for the
sanitizer runtime's startup memory mapping, and the TSan suppressions file
(test/sitl_tsan.supp) for the Gazebo simulation transport. Linked from SUMMARY.md
and the test_and_ci index.
* docs(docs): Add missing uorb topics sidebar
* docs(docs): discontinue cuav v5 plus/nano
* docs(docs): Fix 404 and 303 status HTTP links
* docs(docs): more link fixes
* update(drivers): Docs fix to fix up link
* docs(docs): Fix up all remaining broken links and add exclusions
* feat(manual_control): trigger RC override on stick velocity
COM_RC_STICK_OV is now a velocity threshold (1/s) instead of a deflection percentage.
Default 3.0, range [1.0, 10.0]. A stick held statically cannot trigger override.
* docs(manual_control): update COM_RC_STICK_OV description for velocity-based override
* feat(manual_control): gate RC override with sign-consistency check
* fix(ManualControl): lower threshold and filter constant for RC override, add tests for MovingDiff
* refactor(commander): merge RC override params into COM_RC_OVR_SPEED
Replace the COM_RC_OVERRIDE bitmask + COM_RC_STICK_OV threshold with a
single float COM_RC_OVR_SPEED (stick override velocity, 0 = disabled).
Override now applies uniformly in auto and offboard modes.
- ManualControl: rename param, treat 0 as disabled (FLT_EPSILON guard)
- Commander: drop the per-mode bitmask gate and the RcOverrideBits enum
- param_translation: migrate COM_RC_OVERRIDE on import (enabled -> 1.0,
disabled -> 0.0) and drop the unit-incompatible COM_RC_STICK_OV value
- docs: collapse the two params into one across the mode pages
* fix(manual_override): Move configuration to manual_control module
with MAN_OVERRIDE_SPD parameter and a negative value disabling the feature. All other logic stays in Commander.
* docs(releases): add release note for RC override rework (MAN_OVERRIDE_SPD)
---------
Co-authored-by: Matthias Grob <maetugr@gmail.com>
List the VID/PID sourcing options in order of preference: buy your own
from USB-IF, obtain a free pair from a community registry or chip-vendor
program, or use the Dronecode VID. Add a note clarifying that Dronecode
membership is not required to get a board supported in PX4.
Signed-off-by: Ramon Roche <mrpollo@gmail.com>
* add files
* add corvon_V5 docs
docs: fix connectors image path
* docs: address Copilot formatting suggestions
* Subedit
* docs: add radio control wiring details for corvon_V5
* Update docs/en/flight_controller/corvon_V5.md
Co-authored-by: Hamish Willee <hamishwillee@gmail.com>
* boards/corvon: rename V5 subdirectory to v5
This renames the corvon_V5 board to corvon_v5 to conform to PX4 lowercase naming conventions as requested by @mrpollo. Renames target files, docs, and assets accordingly.
* Apply suggestion from @hamishwillee
Co-authored-by: Hamish Willee <hamishwillee@gmail.com>
* docs: add DSU7 debug port pinout and warnings for corvon_v5
This addresses reviewer feedback to include debug port information, placed immediately after the Radio Control section as requested.
* Apply suggestion from @hamishwillee
* fix(boards/corvon_v5): remove unused heater and temperature_compensation
- heater: board has no IMU heater; fixes build after #26325 (requires HEATER_NUM)
- temperature_compensation: modern IMU doesn't need it, follow #27015
Signed-off-by: holydust <holydust@live.ca>
* docs(update): Subedit. Add pwm outputs and gps
* Update docs/en/flight_controller/corvon_v5.md
* Update docs/en/flight_controller/corvon_v5.md
Co-authored-by: Hamish Willee <hamishwillee@gmail.com>
* docs(corvon_v5): add UART flow control, power details, fix broken links
* docs(corvon_v5): fix UART table typo
* fix(boards/corvon_v5): remove unused PX4IO macros. Board has no PX4IO co-processor
Signed-off-by: holydust <holydust@live.ca>
* Apply suggestions from code review
Co-authored-by: Hamish Willee <hamishwillee@gmail.com>
* docs(corvon_v5): update board images
Signed-off-by: holydust <holydust@live.ca>
* fix(corvon_v5): drop unused dshot, fix can3 and adc comments
- Remove CONFIG_DRIVERS_DSHOT=y from default.px4board: DShot is not
supported on this board (no IO timer is DShot-configured) and the
docs already state it as unsupported.
- Fix ADC1_IN8 GPIO list comment from PB8 to PB0 (PB0 is the correct
pin on STM32F765; matches GPIO_RSSI_IN definition below).
- Clarify CAN3 comment in nuttx-config board.h: the pins are unused
on CORVON_V5 (no transceiver populated). manifest.c already marks
CAN3 as not present.
- Update corvon_v5_pinout.xlsx 'All Pinouts' sheet so PA7 (HEATER)
and PA8/PA15/PH4 (CAN3 RX/TX/SILENT) read 'Unused', matching the
actual hardware.
Signed-off-by: holydust <holydust@live.ca>
* fix(corvon_v5): use MCS Electronics USB VID/PID
Set VID/PID to 0x16D0/0x152A (MCS Electronics) in the app defconfig
and regenerate the bootloader binary, replacing the 3DR FMUv5 IDs
inherited from the reference config.
Signed-off-by: holydust <holydust@live.ca>
---------
Signed-off-by: holydust <holydust@live.ca>
Co-authored-by: Hamish Willee <hamishwillee@gmail.com>
* Add Sony AS-DT1 Distance Sensor and Documentation
* Ensuring Rotation Parameter works
* Sony ASDT1 Sensor and Documentaiton
* Fixed formatting and added additional comments
* Forgot to stage 1 formatting issue
* fix(drivers): use AS-DT1 parameters consistently
remove the Sony-ASDT1 -R command line rotation, as well as some other small fixes. Updated the docs to reflect this as well.
* refactor(drivers): clarify Sony AS-DT1 variable names
---------
Co-authored-by: Sean Hickey <sean@ascendengineer.com>
Co-authored-by: Andrew Brahim <35986980+dirksavage88@users.noreply.github.com>
Add a 2nd-order critically-damped attitude reference model whose angular-velocity output is fed forward onto the rate setpoint, removing the steady-state ramp-tracking lag of the pure-P attitude law. The model uses an exact closed-form discretisation, so it is unconditionally stable.
Parameters:
- MC_REF_W_N reference-model bandwidth [rad/s]
- MC_REF_FF feedforward gain [0..1]; 0 disables the anticipation
- MC_REF_FF_MAX per-axis feedforward saturation [deg/s]
The commanded yaw rate is always fed forward at unity (it is a setpoint, not a model prediction), so MC_REF_FF scales only the error-driven anticipation and MC_REF_FF=0 is the exact legacy pure-P law. Shipped disabled by default to avoid changing behaviour on existing platforms; enable per-airframe. Includes docs and the updated controller diagram.
* fix(docs): invert vectorized diagram SVGs in dark mode
* docs(docs): Apply fix as a class
* Add yarn lock to fix CI
---------
Co-authored-by: Hamish Willee <hamishwillee@gmail.com>
