* feat(lib/sensor_calibration): add differential pressure calibration Airspeed sensors had a single global zero offset, so a second or third sensor could not be calibrated. Link the calibration to the sensor's device ID, following the existing barometer and magnetometer pattern, so the offsets stay bound to physical sensors rather than to uORB instance order. Signed-off-by: mahima-yoga <mahima@auterion.com> * feat(sensors): support multiple airspeed sensors The airspeed selector has always been able to validate and fail over between three airspeed sensors, but nothing ever produced more than one. Give each differential pressure sensor its own VehicleAirspeed item, which owns its calibration, validator and airspeed publication, following the VehicleIMU pattern. Airspeed carries the device ID of the sensor it came from, so consumers can tell the instances apart. The calibration routine now calibrates every connected sensor. Signed-off-by: mahima-yoga <mahima@auterion.com> * refactor(sensors)!: replace SENS_DPRES_OFF with per-sensor calibration SENS_DPRES_OFF applied one zero offset to whichever airspeed sensor happened to come first, which cannot work once there is more than one sensor. It is superseded by CAL_DPRESx_OFF. BREAKING CHANGE: SENS_DPRES_OFF is removed. Ground stations that read it to decide whether airspeed has been calibrated must check CAL_DPRES0_ID instead, matching how CAL_MAG0_ID, CAL_GYRO0_ID and CAL_ACC0_ID are already used. Signed-off-by: mahima-yoga <mahima@auterion.com> * feat(logger): log all airspeed and differential pressure instances The airspeed selector supports up to three airspeed sensors, but the logger only recorded one airspeed instance and two differential pressure instances. Signed-off-by: mahima-yoga <mahima@auterion.com> * fix(commander): stop airspeed calibration consuming a new slot each time Signed-off-by: mahima-yoga <mahima@auterion.com> * fix(sensors): give the analogue airspeed sensor a device ID Signed-off-by: mahima-yoga <mahima@auterion.com> * fix(boards): keep the airspeed conversion in ITCM Signed-off-by: mahima-yoga <mahima@auterion.com> * refactor(sensors): initialise airspeed instances outside the main loop Signed-off-by: mahima-yoga <mahima@auterion.com> * chore(sensors): correct the copyright year on the new CMakeLists Signed-off-by: mahima-yoga <mahima@auterion.com> * refactor(airspeed_selector): share the airspeed sensor count constant Signed-off-by: mahima-yoga <mahima@auterion.com> * docs(sensor_calibration): explain the unusable calibration slot guard Signed-off-by: mahima-yoga <mahima@auterion.com> * fix(sensors): keep SENS_DPRES_OFF as a mirror of the first sensor Signed-off-by: mahima-yoga <mahima@auterion.com> --------- Signed-off-by: mahima-yoga <mahima@auterion.com>
The autopilot stack the industry builds on.
About
PX4 is an open-source autopilot stack for drones and unmanned vehicles. It supports multirotors, fixed-wing, VTOL, rovers, and many more experimental platforms from racing quads to industrial survey aircraft. It runs on NuttX, Linux, and macOS. Licensed under BSD 3-Clause.
Why PX4
Modular architecture. PX4 is built around uORB, a DDS-compatible publish/subscribe middleware. Modules are fully parallelized and thread safe. You can build custom configurations and trim what you don't need.
Wide hardware support. PX4 runs on a wide range of autopilot boards and supports an extensive set of sensors, telemetry radios, and actuators through the Pixhawk ecosystem.
Developer friendly. First-class support for MAVLink and DDS / ROS 2 integration. Comprehensive SITL simulation, hardware-in-the-loop testing, and log analysis tools. An active developer community on Discord and the weekly dev call.
Vendor neutral governance. PX4 is hosted under the Dronecode Foundation, part of the Linux Foundation. Business-friendly BSD-3 license. No single vendor controls the roadmap.
Supported Vehicles
|
Multicopter |
Fixed Wing |
VTOL |
Rover |
…and many more: helicopters, autogyros, airships, submarines, boats, and other experimental platforms. These frames have basic support but are not part of the regular flight-test program. See the full airframe reference.
Try PX4
Run PX4 in simulation with a single command. No build tools, no dependencies beyond Docker:
docker run --rm -it -p 14550:14550/udp px4io/px4-sitl:latest
Open QGroundControl and fly. See PX4 Simulation Quickstart for more options.
Build from Source
git clone https://github.com/PX4/PX4-Autopilot.git --recursive
cd PX4-Autopilot
make px4_sitl
Note
See the Development Guide for toolchain setup and build options.
Documentation & Resources
| Resource | Description |
|---|---|
| User Guide | Build, configure, and fly with PX4 |
| Developer Guide | Modify the flight stack, add peripherals, port to new hardware |
| Airframe Reference | Full list of supported frames |
| Autopilot Hardware | Compatible flight controllers |
| Release Notes | What's new in each release |
| Contribution Guide | How to contribute to PX4 |
Community
- Weekly Dev Call — open to all developers (Dronecode calendar)
- Discord — Join the Dronecode server
- Discussion Forum — PX4 Discuss
- Maintainers — see
MAINTAINERS.md - Contributor Stats — LFX Insights
Contributing
We welcome contributions of all kinds — bug reports, documentation, new features, and code reviews. Please read the Contribution Guide to get started.
Citation
If you use PX4 in academic work, please cite it. BibTeX:
@software{px4_autopilot,
author = {Meier, Lorenz and {The PX4 Contributors}},
title = {{PX4 Autopilot}},
publisher = {Zenodo},
doi = {10.5281/zenodo.595432},
url = {https://px4.io}
}
The DOI above is a Zenodo concept DOI that always resolves to the latest release. For a version-pinned citation, see the Zenodo record or our CITATION.cff.
Governance
The PX4 Autopilot project is hosted by the Dronecode Foundation, a Linux Foundation Collaborative Project. Dronecode holds all PX4 trademarks and serves as the project's legal guardian, ensuring vendor-neutral stewardship — no single company owns the name or controls the roadmap. The source code is licensed under the BSD 3-Clause license, so you are free to use, modify, and distribute it in your own projects.