Only the imx-image-ros image ships mavlink-router, and its main.conf
exposes a UDP server on port 10000 instead of pushing to a ground
station, on purpose, so Wi-Fi is not flooded with broadcast traffic.
Say so, tell the reader to add the board as a UDP server in
QGroundControl or to add a Normal endpoint for a fixed ground station,
and point at the router's own endpoint documentation.
/dev/ttyros existed but no PX4 module could use it: it was not a board
serial port, so UXRCE_DDS_CFG could not select it and nothing started the
client. Registering it as TELEM 2 lets the generated rc.serial start
uxrce_dds_client on it from the parameter, like a companion link on any
other board, with nothing enabled by default. Tested on the board: with
UXRCE_DDS_CFG set to 102 the client starts at boot on /dev/ttyros at
921600 baud and its session frames arrive on the Linux side. The page
gets a ROS 2 section with the three steps, and the agent install points
at the uXRCE-DDS page since the Linux images do not ship it.
Co-authored-by: Hamish Willee <hamishwillee@gmail.com>