docs(flight_controller): add the AIFoundry Erbium page

Describe the chip, link the product and ET-platform, and state that the
target only runs in the erbium_emu emulator with the SIH quadcopter. It
is listed under Experimental Autopilots.

Assisted-by: Claude:claude-opus-5-5
Signed-off-by: Afonso Oliveira <afonso.oliveira707@gmail.com>
This commit is contained in:
Afonso Oliveira authored and Julian Oes committed 2026-10-23 22:42:28 +02:00
1 parent 41346a23b9
commit 147ffc16a5
3 files changed
+45

No files matched your search

+1
View File
@@ -211,6 +211,7 @@
- [ZenFC H743](flight_controller/zenfc_h743.md)
- [SIYI-UniFC-6-PICO](flight_controller/siyi-unifc-6-pico.md)
- [Experimental Autopilots](flight_controller/autopilot_experimental.md)
- [AIFoundry Erbium](flight_controller/aifoundry_erbium.md)
- [BeagleBone Blue](flight_controller/beaglebone_blue.md)
- [Raspberry Pi 2/3 Navio2](flight_controller/raspberry_pi_navio2.md)
- [Raspberry Pi 2/3/4 PilotPi](flight_controller/raspberry_pi_pilotpi.md)
@@ -0,0 +1,43 @@
# AIFoundry Erbium
<LinkedBadge type="warning" text="Experimental" url="../flight_controller/autopilot_experimental.md"/>
::: warning
PX4 does not manufacture this (or any) autopilot.
Contact [AIFoundry](https://github.com/aifoundry-org) for hardware support or compliance issues.
:::
[Erbium](https://erbium.readthedocs.io/en/latest/) is an AIFoundry RISC-V chip whose design is [open source](https://github.com/aifoundry-org/erbium).
Its CPU subsystem has eight dual-threaded 64-bit [ET-Minion](https://erbium.readthedocs.io/en/latest/minion/) cores (RV64IMFC), derived from the Esperanto ET-SoC-1.
The PX4 target `aifoundry_erbium_default` runs NuttX on a single hart.
## Development Status
Erbium silicon is not yet available.
The target only runs on the `erbium_emu` system emulator from [ET-platform](https://github.com/aifoundry-org/et-platform), and has not been tested on hardware.
The target has no sensor or actuator drivers.
It boots the [SIH](../sim_sih/index.md) quadcopter (airframe `1100`) and keeps parameters and dataman in RAM, so they are lost on reboot.
In the emulator it has been tested to pass the preflight checks, arm, and take off.
The target is not built in PX4 CI, because the CI image does not include a RISC-V toolchain.
## Building
The build uses the `riscv-none-elf` toolchain ([xPack GNU RISC-V Embedded GCC](https://github.com/xpack-dev-tools/riscv-none-elf-gcc-xpack), tested with 14.3.0-1).
Add its `bin` directory to `PATH`, then build:
```sh
make aifoundry_erbium_default
```
## Running in the Emulator
Build `erbium_emu` as described in the [NuttX Erbium Minion documentation](https://nuttx.apache.org/docs/latest/platforms/risc-v/erbium/boards/minion/index.html), then start PX4 with:
```sh
erbium_emu -elf_load build/aifoundry_erbium_default/aifoundry_erbium_default.elf \
-reset_pc 0x40000200 -single_thread -max_cycles 100000000000
```
The NuttX shell runs on the emulator console.
@@ -12,6 +12,7 @@ For more information about PX4 project autopilot board support levels see: [px4.
This category is for experimental autopilots (and autopilot "platforms") that are _not supported_ by either the PX4 project team or by a manufacturer.
- [AIFoundry Erbium](../flight_controller/aifoundry_erbium.md)
- [BeagleBone Blue](../flight_controller/beaglebone_blue.md)
- [Raspberry Pi 2/3 Navio2](../flight_controller/raspberry_pi_navio2.md)
- [Raspberry Pi 2/3/4 PilotPi Shield](../flight_controller/raspberry_pi_pilotpi.md)