mirror of
https://github.com/PX4/PX4-Autopilot.git
synced 2026-11-22 14:19:57 +08:00
* feat(msg): rename rover throttle setpoint to surface_vehicle_* The throttle setpoint was the last rover topic shared by rovers and boats without the surface_vehicle_* prefix decided in #29524. Rename RoverThrottleSetpoint to SurfaceVehicleThrottleSetpoint and the TYPE_ROVER_THROTTLE_* setpoint types to TYPE_SURFACE_VEHICLE_THROTTLE_*. The type values are unchanged. The topic rename breaks ROS 2 users anyway, so also shorten the fields of the throttle and speed setpoints to x and y: the message name already says what the value is and [@frame Body] states the frame. Assisted-by: Claude:claude-opus-5-5 Signed-off-by: Michael Fritsche <frimi999@gmail.com> * fix(zenoh): bring surface_vehicle rename to the zenoh dds topics * fix(concept): rename rover throttle setpoint to surface_vehicle_* in navigation terminology * fix(tools): update px4-ros2-interface-lib pin * docs(msg): describe sideways fields as omnidirectional, not mecanum The surface vehicle messages are shared by rovers and boats, and the lateral axis applies to any vehicle that can move sideways, not only mecanum rovers. Assisted-by: Claude:claude-opus-5-5 Signed-off-by: Michael Fritsche <frimi999@gmail.com> * docs(ros2): use the surface vehicle setpoint type names of the interface lib The pinned px4-ros2-interface-lib names the rover setpoint types SurfaceVehicle*SetpointType. The table and the example reference still used the old Rover*SetpointType class names, which do not exist in that version. Assisted-by: Claude:claude-opus-5-5 Signed-off-by: Michael Fritsche <frimi999@gmail.com> * feat(msg)!: rename surface vehicle throttle setpoint to thrust setpoint The setpoint is a normalized force command along the body x and y axes, which is a thrust, not a throttle. Throttle stays the name for the motor command the actuator control derives from it. surface_vehicle_throttle_setpoint is now surface_vehicle_thrust_setpoint (SurfaceVehicleThrustSetpoint), and SetpointConfig TYPE_SURFACE_VEHICLE_THROTTLE_* are now TYPE_SURFACE_VEHICLE_THRUST_* (same values). The px4-ros2-interface-lib pin follows the matching rename there. Assisted-by: Claude:claude-opus-5-5 Signed-off-by: Michael Fritsche <frimi999@gmail.com> * fix(tools): update px4-ros2-interface-lib pin * fix(commander): do not enable velocity control for surface vehicle thrust setpoints The SurfaceVehicleThrust* setpoint types enabled the velocity flag, taken over from the original interface lib configuration. Nothing in these types uses velocity, and offboard mode maps the same combinations without it. The flag kept the rover speed controller running: switching from a SurfaceVehicleSpeed* to a SurfaceVehicleThrust* type sets the same flags, so the controllers were not reset and a stale speed setpoint kept overriding the commanded thrust. It also made external modes that only command thrust require a local position estimate. Assisted-by: Claude:claude-opus-5-5 Signed-off-by: Michael Fritsche <frimi999@gmail.com> * docs(msg): apply review suggestions for the surface vehicle setpoints Add long descriptions to the thrust and speed setpoints and the speed status, name modules instead of C++ classes, and use single spaces before field comments. Rename the speed status PID integrals from pid_throttle_* to pid_thrust_*, since the speed controller drives the thrust setpoint. Update the docs and the rover control structure diagram for the thrust setpoint and omnidirectional vehicles, note the Rover*SetpointType names of PX4 v1.17 and v1.18, and add the ROS 2 release note. Assisted-by: Claude:claude-opus-5-5 Signed-off-by: Michael Fritsche <frimi999@gmail.com> --------- Signed-off-by: Michael Fritsche <frimi999@gmail.com>
13 lines
881 B
Plaintext
13 lines
881 B
Plaintext
# Surface Vehicle Thrust Setpoint
|
|
#
|
|
# Normalized thrust setpoint for surface vehicles, on land or on water (rovers, boats).
|
|
# Published by the speed controllers of rover_ackermann, rover_differential and rover_mecanum,
|
|
# which turn surface_vehicle_speed_setpoint into it, and by their manual, acro, stabilized and
|
|
# manual parking modes directly from the sticks. Can be sent from ROS 2 over uXRCE-DDS
|
|
# (/fmu/in/surface_vehicle_thrust_setpoint).
|
|
# The actuator controllers of these modules turn it into motor commands (actuator_motors).
|
|
|
|
uint64 timestamp # [us] Time since system start
|
|
float32 x # [-] [@range -1 (Backwards), 1 (Forwards)] [@frame Body] Normalized thrust setpoint along the body X axis
|
|
float32 y # [-] [@range -1 (Left), 1 (Right)] [@frame Body] [@invalid NaN If not omnidirectional] Omnidirectional vehicles only: Normalized thrust setpoint along the body Y axis
|