Balduin 69df0b9238 fix(commander): reject Follow Target and Orbit on fixed-wing (#29432)
* fix(commander): reject Follow Target and Orbit on fixed-wing

Both modes only exist as multicopter flight tasks. Commander runs them
with the Trajectory setpoint type and neither auto, manual nor offboard
set, so that RC input does not make the flight task exit itself.

On fixed-wing that falls through the outer loop: fw_mode_manager ends in
FW_POSCTRL_MODE_OTHER and publishes no lateral/longitudinal setpoint,
while fw_lateral_longitudinal_control keeps running (the position and
altitude flags are set) on the last setpoint it received, with no
timeout. The vehicle flies a straight line at the previous mode's course
and altitude, or at trim airspeed and wings level on a VTOL that never
flew fixed-wing, with no position feedback and all inner loops healthy.

Mark both modes as not supported for fixed-wing, so entry is refused and
a VTOL transitioning while in one of them falls back to RTL. Follow
Target is reachable via DO_SET_MODE without a vehicle type check; Orbit
is already mapped to Loiter for fixed-wing, but the transition case
applies to it too.

Assisted-by: Claude Opus 5 <noreply@anthropic.com>

* feat(vtol_att_control): Also disallow transition to FW in Follow target

Already done for Orbit, this makes sense also for any other mode that is
not supported for FW.

commander: Remove comment describing old architecture.
2026-11-06 16:19:32 +01:00
2026-11-05 19:15:24 +00:00
…
…
…
…
…
…
…

PX4 Autopilot

The autopilot stack the industry builds on.

Release DOI Discord

OpenSSF Best Practices LFX Health Score LFX Contributors LFX Active Contributors


About

PX4 is an open-source autopilot stack for drones and unmanned vehicles. It supports multirotors, fixed-wing, VTOL, rovers, and many more experimental platforms from racing quads to industrial survey aircraft. It runs on NuttX, Linux, and macOS. Licensed under BSD 3-Clause.

Why PX4

Modular architecture. PX4 is built around uORB, a DDS-compatible publish/subscribe middleware. Modules are fully parallelized and thread safe. You can build custom configurations and trim what you don't need.

Wide hardware support. PX4 runs on a wide range of autopilot boards and supports an extensive set of sensors, telemetry radios, and actuators through the Pixhawk ecosystem.

Developer friendly. First-class support for MAVLink and DDS / ROS 2 integration. Comprehensive SITL simulation, hardware-in-the-loop testing, and log analysis tools. An active developer community on Discord and the weekly dev call.

Vendor neutral governance. PX4 is hosted under the Dronecode Foundation, part of the Linux Foundation. Business-friendly BSD-3 license. No single vendor controls the roadmap.

Supported Vehicles

Multicopter
Multicopter
Fixed Wing
Fixed Wing
VTOL
VTOL
Rover
Rover

…and many more: helicopters, autogyros, airships, submarines, boats, and other experimental platforms. These frames have basic support but are not part of the regular flight-test program. See the full airframe reference.

Try PX4

Run PX4 in simulation with a single command. No build tools, no dependencies beyond Docker:

docker run --rm -it -p 14550:14550/udp px4io/px4-sitl:latest

Open QGroundControl and fly. See PX4 Simulation Quickstart for more options.

Build from Source

git clone https://github.com/PX4/PX4-Autopilot.git --recursive
cd PX4-Autopilot
make px4_sitl

Note

See the Development Guide for toolchain setup and build options.

Documentation & Resources

Resource Description
User Guide Build, configure, and fly with PX4
Developer Guide Modify the flight stack, add peripherals, port to new hardware
Airframe Reference Full list of supported frames
Autopilot Hardware Compatible flight controllers
Release Notes What's new in each release
Contribution Guide How to contribute to PX4

Community

Contributing

We welcome contributions of all kinds — bug reports, documentation, new features, and code reviews. Please read the Contribution Guide to get started.

Citation

If you use PX4 in academic work, please cite it. BibTeX:

@software{px4_autopilot,
  author    = {Meier, Lorenz and {The PX4 Contributors}},
  title     = {{PX4 Autopilot}},
  publisher = {Zenodo},
  doi       = {10.5281/zenodo.595432},
  url       = {https://px4.io}
}

The DOI above is a Zenodo concept DOI that always resolves to the latest release. For a version-pinned citation, see the Zenodo record or our CITATION.cff.

Governance

The PX4 Autopilot project is hosted by the Dronecode Foundation, a Linux Foundation Collaborative Project. Dronecode holds all PX4 trademarks and serves as the project's legal guardian, ensuring vendor-neutral stewardship — no single company owns the name or controls the roadmap. The source code is licensed under the BSD 3-Clause license, so you are free to use, modify, and distribute it in your own projects.

Dronecode Logo

Languages
C++ 49.7%
C 36%
Python 4.9%
CMake 4.4%
Linker Script 3.3%
Other 1.5%