mirror of
https://github.com/PX4/PX4-Autopilot.git
synced 2026-09-24 19:08:21 +08:00
571a20a15a
* fix(msg): correct comments regarding default values The mentioned defaulting happens in FwLateralLongitudinalControl::updateLongitudinalControlConfiguration, where they clearly default to the climb / sink rate _setpoint_, not the respective maximum. No new message version needed as only comment is changed. * fix(msg): correct stale publisher reference in FixedWingLateralGuidanceStatus fw_pos_control was split into fw_mode_manager and fw_lateral_longitudinal_control; the topic is published by the mode manager.
19 lines
1.3 KiB
Plaintext
19 lines
1.3 KiB
Plaintext
# Fixed Wing Longitudinal Control Configuration message
|
|
#
|
|
# Used by the fw_lateral_longitudinal_control module and TECS to constrain FixedWingLongitudinalSetpoint messages
|
|
# and configure the resultant setpoints.
|
|
|
|
uint32 MESSAGE_VERSION = 0
|
|
|
|
uint64 timestamp # [us] Time since system start
|
|
|
|
float32 pitch_min # [rad] [@range -pi, pi] Defaults to FW_P_LIM_MIN if NAN.
|
|
float32 pitch_max # [rad] [@range -pi, pi] Defaults to FW_P_LIM_MAX if NAN.
|
|
float32 throttle_min # [norm] [@range 0,1] Defaults to FW_THR_MIN if NAN.
|
|
float32 throttle_max # [norm] [@range 0,1] Defaults to FW_THR_MAX if NAN.
|
|
float32 climb_rate_target # [m/s] Target climbrate to change altitude. Defaults to FW_T_CLMB_R_SP if NAN. Not used if height_rate is directly set in FixedWingLongitudinalSetpoint.
|
|
float32 sink_rate_target # [m/s] Target sinkrate to change altitude. Defaults to FW_T_SINK_R_SP if NAN. Not used if height_rate is directly set in FixedWingLongitudinalSetpoint.
|
|
float32 speed_weight # [-] [@range 0,2] 0=pitch controls altitude only, 2=pitch controls airspeed only
|
|
bool enforce_low_height_condition # If true, the altitude controller is configured with an alternative timeconstant for tighter altitude tracking
|
|
bool disable_underspeed_protection # If true, underspeed handling is disabled in the altitude controller
|