Files

147 lines
5.6 KiB
Markdown

# macOS Development Environment
The following instructions set up a PX4 development environment on macOS.
Це середовище може бути використане для збірки PX4 для:
- Pixhawk та іншого апаратного забезпечення на основі NuttX
- [Gazebo Simulation](../sim_gazebo_gz/index.md) (Gazebo Harmonic)
It works on both Intel and Apple Silicon Macs.
PX4 CI exercises this setup on Apple Silicon runners only; Intel is not covered by CI.
:::tip
This setup is supported by the PX4 dev team.
To build for [other targets](../dev_setup/dev_env.md#supported-targets) you will need to use a [different OS](../dev_setup/dev_env.md#supported-targets) or an [unsupported development environment](../advanced/community_supported_dev_env.md).
:::
## Development Environment Setup
### Вимоги
1. **Install Xcode Command Line Tools**, which provide `git`, `make`, and the Apple `clang` compiler:
```sh
xcode-select --install
```
2. **Install Homebrew** by following the [installation instructions](https://brew.sh).
The setup script below also installs Homebrew if it is missing.
3. **Increase the open-file limit.** The PX4 build opens many files simultaneously and the macOS default limit (256) is too low. You may see `"LD: too many open files"` errors without this.
Add the following line to your shell startup file so it applies to every new terminal session.
macOS defaults to **zsh** since Catalina, so add it to `~/.zshrc` (use `~/.bashrc` if you use bash):
```sh
echo "ulimit -S -n 2048" >> ~/.zshrc
```
Then **open a new terminal** (or run `source ~/.zshrc`) for the change to take effect.
### Install Development Tools
1. **Download PX4 Source Code:**
```sh
git clone https://github.com/PX4/PX4-Autopilot.git
cd PX4-Autopilot
git submodule update --init --recursive --force
```
2. **Install development environment libraries** from the [macos.sh](https://github.com/PX4/PX4-Autopilot/blob/main/Tools/setup/macos.sh) helper script:
```sh
./Tools/setup/macos.sh --sim-tools
```
::: info
The setup script creates a Python virtual environment at `.venv` in the repo root and installs all Python dependencies into it. This keeps PX4's Python requirements isolated from your system Python and avoids conflicts with Homebrew's externally-managed Python.
Activate it before building:
```sh
source .venv/bin/activate
```
You'll need to re-run this command in each new terminal session. To activate it automatically when you `cd` into the repo, consider a tool like [direnv](https://direnv.net/) or add the activation to your `~/.zshrc`.
:::
The script installs the NuttX cross-compiler and build tools, the Python dependencies (into the `.venv` described above), and with `--sim-tools` the Gazebo simulation stack.
It is the source of truth for what gets installed; read [macos.sh](https://github.com/PX4/PX4-Autopilot/blob/main/Tools/setup/macos.sh) for the details.
::: info
Omit `--sim-tools` if you only need to build for NuttX hardware and don't need simulation.
All Gazebo dependencies are optional at build time, so `make px4_sitl` still works without them.
Use `--reinstall` to force reinstallation of the Homebrew formulas (useful if something is broken).
:::
::: info
The script installs from third-party Homebrew taps and marks them as trusted (`brew trust`) on Homebrew 6.0 and later, which refuses to load formulae from untrusted taps.
With `--sim-tools` it will prompt for your password.
:::
### Gazebo Simulation
The `--sim-tools` flag installs Gazebo and the libraries PX4's simulation modules build against.
Gazebo does not come from Homebrew.
The script installs it from a locked [conda-forge](https://conda-forge.org/) environment, using [pixi](https://pixi.prefix.dev/latest/), into `Tools/setup/macos/.pixi`.
The lock file pins every package, so the install does not change when Homebrew updates its own Gazebo dependencies.
The build and the `make px4_sitl gz_*` targets find it on their own, like the `.venv`.
Activating `.venv` also puts it on your `PATH`, which you only need to run `gz` commands directly.
If you skipped `--sim-tools` during initial setup and want to add simulation later, re-run the setup script with the flag (it is safe to run repeatedly):
```sh
./Tools/setup/macos.sh --sim-tools
```
:::info
The script also installs **XQuartz**.
macOS may require you to log out and back in after XQuartz is first installed.
:::
### Verify Installation
After installation, verify the key tools are available:
```sh
# NuttX cross-compiler
arm-none-eabi-gcc --version
# Build tools
cmake --version
ninja --version
# Gazebo (if --sim-tools was used, with .venv activated)
gz sim --versions
```
As a quick smoke test, build and run a simulation target:
```sh
make px4_sitl gz_x500
```
If everything is set up correctly, this will build PX4 SITL and launch a Gazebo simulation with the x500 quadcopter.
## Наступні кроки
Після того, як ви закінчите налаштування інструментів командного рядка:
- Install [VSCode](../dev_setup/vscode.md) (if you prefer using an IDE to the command line).
- Install the [QGroundControl Daily Build](../dev_setup/qgc_daily_build.md)
::: tip
The _daily build_ includes development tools that are hidden in release builds.
Вона також може надати доступ до нових функцій PX4, які ще не підтримуються в релізних збірках.
:::
- Continue to the [build instructions](../dev_setup/building_px4.md).