Files

68 lines
2.1 KiB
Markdown

# 모듈 참조: 시뮬레이션
:::info
**This page is [auto-generated](https://github.com/PX4/PX4-Autopilot/blob/main/Tools/px4moduledoc/markdownout.py) from the source code** using the build command: `make module_documentation`.
Do not edit it directly; fix the module documentation in the [PX4-Autopilot](https://github.com/PX4/PX4-Autopilot) source instead.
:::
## simulator_sih
Source: [modules/simulation/simulator_sih](https://github.com/PX4/PX4-Autopilot/tree/main/src/modules/simulation/simulator_sih)
### 설명
This module provides a simulator for quadrotors and fixed-wings running fully
inside the hardware autopilot.
This simulator subscribes to "actuator_outputs" which are the actuator pwm
signals given by the control allocation module.
이 시뮬레이터는 루프에 상태 추정기를 통합하기 위하여 실제 노이즈로 손상된 센서 신호를 게시합니다.
### 구현
시뮬레이터는 선형대수를 사용하여 운동 방정식을 구현합니다.
쿼터니언 표현은 태도에 사용됩니다.
적분에는 순방향 오일러가 사용됩니다.
대부분의 변수는 스택 오버플로를 피하기 위하여 .hpp 파일에서 전역으로 선언됩니다.
### 예
Pose the vehicle on the ground for accel and mag calibration (SITL only), sides named as the calibration names them.
With `rotate` it turns about the vertical with a tilt swing, as the mag calibration asks for:
```
simulator_sih orient left rotate
```
Each side in turn: 10 s still, then 10 s rotating, then level. This completes either calibration.
```
simulator_sih orient all
```
Level the vehicle and resume the flight dynamics:
```
simulator_sih orient off
```
### Usage {#simulator_sih_usage}
```
simulator_sih <command> [arguments...]
Commands:
start
[-t <val>] Terrain elevation GeoTIFF (DEM), SITL only
values: <file>
orient Pose the vehicle on the ground for calibration
down|up|front|back|left|right|all|off Side facing down, every side in turn,
or level
[rotate] Rotate about the vertical
stop
status print status info
```