Commit Graph
76 Commits
Author SHA1 Message Date
Jacob Dahl dc593e7690 docs(ark_pab): the second PAB connector is 50-pin (#29066)
The Pixhawk Autopilot Bus standard (DS-010), the ARK FMU modules' datasheets and the ARK store all give the second board-to-board connector as a 50-pin Hirose DF40.

Assisted-by: Claude:claude-opus-5-5
2026-10-09 17:49:53 -06:00
Hamish Willee 860aca9864 docs(docs): fix broken links and missing uORB TOC entries (#28827)
* docs(msg): add missing uORB message pages to SUMMARY

The msg_docs block in SUMMARY.md is not regenerated by the metadata sync,
so seven message pages were unreachable from the sidebar (PageNotInTOC).
Replace the block with the fragment written by generate_msg_docs.py,
which also moves VehicleControlMode to the unversioned list.

Assisted-by: Claude:claude-opus-5-5
Signed-off-by: Hamish Willee <hamishwillee@gmail.com>

* docs: fix broken and permanently redirected external links

CUAV moved its docs to a /en/<product>/ layout, so the Nora, C-RTK 9Ps
and C-RTK2 links returned 404. Other vendor links (InvenSense, Bosch,
ARK, CORVON) permanently redirect; point them at the final URL.

Assisted-by: Claude:claude-opus-5-5
Signed-off-by: Hamish Willee <hamishwillee@gmail.com>

* docs: fix remaining dead external links

RaccoonLab's store product pages, the CubeNode pin descriptions,
wiki.ubuntu.com/LTS and the Bitbucket NuttX repos no longer resolve.
RaccoonLab now only has docs pages for these devices, so link those.

ubuntu.sh and macos.sh already install kconfig-frontends, so the NuttX
porting guide no longer tells Ubuntu users to build it from source; the
old steps are kept in a comment.

Assisted-by: Claude:claude-opus-5-5
Signed-off-by: Hamish Willee <hamishwillee@gmail.com>

* docs: ignore unresolvable external links for 6 months

These links fail the external link check for reasons a docs edit can't
fix: bot blocking (raccoonlab.co, gitlab.arm.com), expired vendor
certificates (svehicle.cn, jmarple.ai), and the ARKV6X-RT order link,
which is waiting on a replacement URL from ARK.

Assisted-by: Claude:claude-opus-5-5
Signed-off-by: Hamish Willee <hamishwillee@gmail.com>

---------

Signed-off-by: Hamish Willee <hamishwillee@gmail.com>
2026-09-24 09:55:45 +10:00
PX4BuildBot 5fd9398462 docs: auto-sync metadata [skip ci]
Co-Authored-By: PX4 BuildBot <bot@px4.io>
2026-09-23 05:21:00 +00:00
23890f9988 feat(boards/zenfc): Add ZenFC H743 board support (#28360)
* Add ZenFC H743 board support plus the documentation. 

---------

Co-authored-by: abhishek-kumar-prodev <abhishek.kumar.ubuntu@gmail.com>
Co-authored-by: Hamish Willee <hamishwillee@gmail.com>
Co-authored-by: Farhang <46557204+farhangnaderi@users.noreply.github.com>
Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com>
2026-09-22 22:14:50 -07:00
Julian Oes 4565d0db06 docs(boards): flesh out the NWBlue Pro H757 page
Address the review feedback from @hamishwillee: add a board photo,
mechanical and electrical data, a Radio Control section stating that RC
is wired directly to the FMU, and per-connector pinout tables taken from
the manufacturer documentation.

Assisted-by: Claude:claude-fable-5-1
Signed-off-by: Julian Oes <julian@oes.ch>
2026-09-11 15:10:50 +12:00
Julian Oes b2684848ac feat(boards): add NWBlue Pro H757
The NWBlue Pro H757 is a 30x30 mm FPV flight controller built around the
CubePilot CubeNode H757 module: STM32H757, on-module ICM45686 IMU and
on-carrier DPS368 baro on SPI3, IIS2MDC magnetometer on I2C3, microSD on
SDMMC2, 9 DShot/PWM outputs, CAN1 and six UARTs.

Pin assignments follow the ArduPilot NWBLUE_PROH757 hwdef, including board
ID 5730. The sensor rotations do not: the hwdef specifies ROTATION_ROLL_180
for the IMU, but on this hardware both the IMU and the magnetometer are
unrotated, confirmed on the bench and by compass calibration.

PLL1P runs at 480MHz so the timer clock is 240MHz, which DShot600 divides
into exactly 20 ticks per bit. At 400MHz that division truncates and every
bit comes out 4.2% short, which some ESCs reject. Bidirectional DShot works
on every output except FMU_CH6: that one is TIM4_CH4, and the H7 DMAMUX has
no request line for it.

Timers: TIM1/2/3/4 drive the outputs, TIM8_CH3 the buzzer so a passive
piezo produces a real tone, TIM12 the HRT and TIM6 the uavcan clock. TIM5
is deliberately left unallocated - the HRT does not work there (every
periodic work item runs once and is never rescheduled, while
interrupt-driven peripherals keep going so the board still looks alive),
and it is also the H7 default for the uavcan clock, where it kept DroneCAN
from coming up.

There is no analog OSD chip, so an HD VTX has to render the OSD itself over
MSP DisplayPort on the VTX connector (USART6 / TEL2). MSP_OSD_CONFIG is
left unset so that port can equally serve as a plain TEL2.

px4_uploader learns the board's USB ID (CubePilot VID 0x2DAE, PID 0x2001).

bringup.md records what has been verified on hardware and what has not.

Assisted-by: Claude:claude-opus-5[1m]
Signed-off-by: Julian Oes <julian@oes.ch>
2026-09-11 15:10:50 +12:00
abhijithcv 72ab92881a refactor(boards/agam): rename board directory to agam
We would like to refactor agam-robotics directory to agam for ease of use
and brevity. boards/agam-robotics becomes boards/agam, making the build
target agam_fmu-v6xrt_default. The bundled bootloader is rebuilt under the
new target name.
2026-09-10 11:14:12 -07:00
PX4BuildBot 2a0e910923 docs: auto-sync metadata [skip ci]
Co-Authored-By: PX4 BuildBot <bot@px4.io>
2026-09-10 04:37:36 +00:00
zhucaiguiandzhucaigui 2c510b8195 feat(boards): add siyi_unifc-6-pico flight controller (#27835)
This adds siyi_unifc-6-pico flight controller board in addition to the docs provided for the same board in this PR. 

Co-authored-by: zhucaigui <zhucaigui@siyi.biz>
2026-09-10 00:31:07 -04:00
7df3dbcc73 feat(boards/agam-robotics): add Agam Robotics FMU-v6XRT board support (#28285)
* feat(boards/agam-robotics): add Agam Robotics FMU-v6XRT board support

---------

Signed-off-by: abhijithcv <abhijithcv1212@gmail.com>
Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com>
Co-authored-by: Farhang <46557204+farhangnaderi@users.noreply.github.com>
Co-authored-by: Hamish Willee <hamishwillee@gmail.com>
2026-09-08 10:47:44 -04:00
Hamish Willee ba5a120c06 docs(docs): DroneCAN ESC and ark 6rt RC fix (#28503)
* DroneCAN ESC armingstatus and relnote

* Shrink ard6xrt images

* docs(docs): Fix up RC section of docs

* docs(docs): IO module docs include protocols
2026-09-02 13:09:03 +10:00
Alex KlimajandJacob Dahl ed93e5c87c feat(boards): add the ARK FMU-v6XRT (#27161)
* ARKV6X-RT Initial Commit

* icm45686 yaw 270

* iis2mdc yaw 180

* fix(ark/v6x-rt): wrap FLASH_END macro body in parentheses

Fixes clang-tidy bugprone-macro-parentheses.

Signed-off-by: alexklimaj <alex@arkelectron.com>

* update(ark/v6x-rt): modify bootloader binary for enhancements

* feat(ark/v6x-rt): enable LSM6DSV80X IMU on SPI3

Enable the lsm6dsv driver, register the SPI3 chip select with the
LSM6DSV devtype, and start the driver with -T 80 to select the
LSM6DSV80X high-g variant (shared WHO_AM_I 0x73).

Signed-off-by: alexklimaj <alex@arkelectron.com>

* feat(ark/v6x-rt): start IIM-20670 IMU on SPI2

Rotation verified on bench (yaw 90). The driver comes with PX4 PR

Signed-off-by: alexklimaj <alex@arkelectron.com>
#27624; until it merges the start call fails harmlessly at boot.

* fix(ark/v6x-rt): correct SPI3 DRDY2 pin, clang-tidy parens, cleanup

- GPIO_SPI3_DRDY2_SENSOR3 pointed at GPIO_EMC_B2_09 (the buzzer pin); corrected to GPIO_EMC_B2_18 / GPIO2_IO28 per schematic
- parenthesize BOOT_DEVICES_SELECTION / BOOT_DEVICES_FILTER_ONUSB macro bodies (clang-tidy bugprone-macro-parentheses)
- set board_id / BOARD_TYPE to 62
- remove unused ENET INT/RST GPIO macros copied from fmu-v6xrt
- remove duplicate GPIO_VDD_3V3_SENSORS4_EN init-list entry and Configuration banner
- rename fmuv6xrt_* board functions, file headers, include guards, and Kconfig symbols to ark/v6x-rt

Signed-off-by: Jacob Dahl <dahl.jakejacob@gmail.com>

* rename v6x-rt to fmu-v6xrt

* feat(ark/fmu-v6xrt): build the IIM-20670 driver for the SPI2 IMU

rc.board_sensors already starts iim20670, but the Kconfig symbol was left
as a TODO placeholder because the driver was not in tree yet, so the SPI2
IMU never came up. The driver exists now.

Depends on #27624 - the symbol is unknown to Kconfig until that merges.

Signed-off-by: Jacob Dahl <dahl.jakejacob@gmail.com>

* fix(ark/fmu-v6xrt): declare the IMXRT chip in the board config

Without it Kconfig falls back to ARCH_CHIP_UNSET and every configure warns
"ARCH_CHIP_UNSET was assigned the value 'y' but got the value 'n'".

Cosmetic only - the real chip selection comes from the NuttX defconfig via
CONFIG_ARCH_CHIP_MIMXRT1176DVMAA, and the image is byte-identical either
way. px4/fmu-v6xrt and nxp/tropic-community already declare it.

Signed-off-by: Jacob Dahl <dahl.jakejacob@gmail.com>

* feat(ark/fmu-v6xrt): calibrate FlexSPI DLL read strobe at boot

Port of PX4/PX4-Autopilot#28141 (9f4bc80006), which landed on px4/fmu-v6xrt.
The two init.c files were otherwise identical apart from board-specific
names, so this takes the change unmodified.

Corrects the ROM-provided DLL delay by finding the valid DQS sampling range
and selecting its midpoint, for reliable octal-DDR flash reads.

* fix(ark/fmu-v6xrt): declare the SPI2 IMU as an IIM-20670

The LPSPI2 entry still carried the ICM45686 devtype placeholder from before
the driver existed. SPIBusIterator matches a driver to a bus device on
devtype_driver, so iim20670 found no instance and the SPI2 IMU never came up
even with the driver built in.

Depends on #27624 for DRV_IMU_DEVTYPE_IIM20670, same as the Kconfig symbol
already enabled here.

Assisted-by: Claude:claude-opus-5
Signed-off-by: Jacob Dahl <dahl.jakejacob@gmail.com>

* fix(ark/fmu-v6xrt): enable the INA226 by default

rc.board_sensors only starts a power monitor explicitly when one of the
SENS_EN_INA* params is set, and otherwise falls back to i2c_launcher
autostart. With SENS_EN_INA226 left at its 0 default the board always
took the fallback, which never produced a working instance, so the
board had no battery monitor at all.

ark/fmu-v6x already sets this. Verified on hardware: started this way
the INA226 on I2C1 0x41 reads 15.998 V against a 16.007 V bench supply.

Assisted-by: Claude:claude-opus-5[1m]
Signed-off-by: Jacob Dahl <dahl.jakejacob@gmail.com>

* fix(ark/fmu-v6xrt): correct the zero-padded DRDY pin macros

GPIO_PIN05 and GPIO_PIN07 do not exist - the NuttX imxrt pin macros are
not zero padded (GPIO_PIN5, GPIO_PIN7). Three DRDY definitions named
them, so any translation unit that expanded GPIO_SPI2_DRDY1_SENSOR2,
GPIO_SPI6_DRDY1_EXTERNAL1 or GPIO_SPI6_DRDY2_EXTERNAL1 would fail to
compile.

Nothing expands them today: the SPI bus description in spi.cpp carries
its own port/pin pairs, and the only other reference is
GPIO_DRDY_OFF_SPI6_DRDY2_EXTERNAL1, which is itself unused. That is why
this has gone unnoticed. Found by writing a bench command that did use
them.

boards/px4/fmu-v6xrt/src/board_config.h has the same three typos and
needs the same fix separately.

Assisted-by: Claude:claude-opus-5[1m]
Signed-off-by: Jacob Dahl <dahl.jakejacob@gmail.com>

* docs(ark/fmu-v6xrt): document the board's architecture and SWD flashing

The RT1176 has no internal flash and boots XIP from an external octal NOR
via a boot ROM that reads an FCB and IVT out of the image, which is enough
unlike an STM32 that the flashing procedure looks arbitrary without it.
Covers the differences, the dependencies, and the verified pyocd sequence
for the bootloader and the application.

* feat(ark/fmu-v6xrt): build the heater driver and regulate on the LSM6DSV80X

The heater (R34/Q1 on GPIO2_IO27) is populated and plumbed in
board_config.h but the driver was never built, so the IMUs ran at
ambient. The LSM6DSV80X publishes its high-g channel, whose zero-g
level moves 2 mg/degC (DS14764 Table 3) - an 0.8 m/s^2 walk over a
40 degC swing, enough to trip the accel consistency check - so bind
the heater to that sensor. HEATER1_TEMP stays at the driver default.

* fix(ark/fmu-v6xrt): place SubscriptionIntervalBase in ITCM

The ITCM include list still named uORB::SubscriptionInterval::{updated,copy},
which stopped existing when those methods moved onto SubscriptionIntervalBase<Lb0/Lb1>.
The wildcards fail open, so the two hottest uORB copies ran XIP instead of ITCM.

Signed-off-by: Jacob Dahl <dahl.jakejacob@gmail.com>

* fix(ark/fmu-v6xrt): float SPIX_SYNC so it cannot fight LSM6DSV INT2

The MCU pin was driven push-pull high into LSM6DSV80X INT2, which idles
low and is active-high. Same net as ark/fmu-v6x, which leaves the pad
as an input with pulldown.

Signed-off-by: Jacob Dahl <dahl.jakejacob@gmail.com>

* fix(ark/fmu-v6xrt): complain when the IMU hwtype is unknown

The three internal IMUs only start on ARKV6XRT000. A future FMUM id
would previously boot with mag and baro only and no indication why.

Signed-off-by: Jacob Dahl <dahl.jakejacob@gmail.com>

* fix(ark/fmu-v6xrt): default RC to CRSF on the RC port

COMMON_RC already builds the per-protocol UART drivers, but none of
them were bound to a port, so there was no RC until a user set
RC_*_PRT_CFG. Bind CRSF to the RC serial (300) and leave the
auto-detect rc_input driver out — PPM/DSM-bind is not wanted here.

Signed-off-by: Jacob Dahl <dahl.jakejacob@gmail.com>

* feat(ark/fmu-v6xrt): enable SPARTN framing and PPS capture

Parity with ark/fmu-v6x: build the GPS SPARTN framer so PointPerfect
corrections can be injected, and include pps_capture so a mixer
PPS_Input pin can timestamp GNSS TIMEPULSE.

Signed-off-by: Jacob Dahl <dahl.jakejacob@gmail.com>

* fix(ark/fmu-v6xrt): drive panic LEDs from the real phy_set_led

autoleds.c defined board_autoled_on/off against a local empty
phy_set_led stub because the real one in led.c was static, so
NuttX PANIC/ASSERT never lit an LED. Fold the autoled hooks into
led.c, matching ark/fmu-v6x.

Signed-off-by: Jacob Dahl <dahl.jakejacob@gmail.com>

* chore(ark/fmu-v6xrt): drop leftover Kinetis and unused board symbols

automount.c is still the FMUK66 SD automounter and is compiled out.
GPIO_PWM_IN names a pinmux that does not exist, PX4_I2C_BUS_MTD
contradicts mtd.cpp, the Boot Flash Kconfig choice is unread, and
the RUNFROMISRAM copy in imxrt_ocram_initialize.c does not compile
on this XIP board. Also point HW_REV/VER_SENSE at the ADC channels
they actually sample and fix the USDHC pin table.

Signed-off-by: Jacob Dahl <dahl.jakejacob@gmail.com>

* perf(ark/fmu-v6xrt): grow the logger RAM buffer to 128 KiB

The imxrt arch default is 64 KiB and the logger already sat at 96 % of
that at rest. The RT1176 has megabytes of OCRAM; another 64 KiB of
ring buffer is cheap insurance against SD write dropouts in flight.

Signed-off-by: Jacob Dahl <dahl.jakejacob@gmail.com>

* feat(ark/fmu-v6xrt): publish LPUART11 as the EXT2 serial port

LPUART11 is built as /dev/ttyS7 and brought out on the PAB UART4 pins.
Without CONFIG_BOARD_SERIAL_EXT2 the device node exists but nothing can
bind a protocol to it from the serial-port params.

Signed-off-by: Jacob Dahl <dahl.jakejacob@gmail.com>

* fix(ark/fmu-v6xrt): enable 64-bit off_t so SD files can exceed 2 GiB

Without CONFIG_FS_LARGEFILE, off_t is 32-bit: a single ULog cannot
cross 2 GiB and df/ls wrap on cards larger than 4 GiB. px4/fmu-v6xrt
gained this in 05be273a35; the ARK defconfig was forked before that.

Signed-off-by: Jacob Dahl <dahl.jakejacob@gmail.com>

* fix(ark/fmu-v6xrt): sync the FRAM MTD driver and actually erase it

The local copy never advanced the bwrite source, so a multi-page
param save repeated the first 128 bytes, and lacked the word-aligned
bounce buffer from e8a4304e1c. Pull those in from px4/fmu-v6xrt.

Erase was still wrong in both trees: `uint8_t buf[128] = {0xff}` only
sets byte 0, and BULKERASE issued one WREN for 256 page programs.
WEL clears after each write, so only page 0 was programmed. memset
0xff and WREN per page so `mtd erase` blanks the store.

Signed-off-by: Jacob Dahl <dahl.jakejacob@gmail.com>

* fix(ark/fmu-v6xrt): match ark/fmu-v6x UART buffer sizes

TELEM2 (LPUART8) and EXT2 (LPUART11) were on the NuttX 256 B default.
Copy the v6x sizes by port: console 180/1500, GPS1 TX 1500, TELEM2 RX
800, EXT2 600/1500.

Signed-off-by: Jacob Dahl <dahl.jakejacob@gmail.com>

* fix(ark/fmu-v6xrt): keep UAVCAN off CAN3, ESC on CAN2 only

PAB pinouts CAN3 but no ARK carrier breaks it out. FlexCAN3 stays built so a different carrier can bring can2 up.

Assisted-by: Grok:grok-4.6
Signed-off-by: Jacob Dahl <dahl.jakejacob@gmail.com>

* fix(ark/fmu-v6xrt): drop i2c_launcher

SENS_EN_INA226 is defaulted on, so the auto-detect fallback is unused. Start INA from the param only, like ark/fmu-v6x.

Assisted-by: Grok:grok-4.6
Signed-off-by: Jacob Dahl <dahl.jakejacob@gmail.com>

* fix(ark/fmu-v6xrt): keep SENSORS4 up and float BMP INT

SENSORS4 is the BMP390 analog rail, not the SE051. Cycling it off
while VDDIO (FMU_3V3) stays up skips POR. Leave it on after the
first enable. Configure I2C2_DRDY1 as a floating input; INT idles
push-pull low and is unused by the driver.

Signed-off-by: Jacob Dahl <dahl.jakejacob@gmail.com>

* fix(ark/fmu-v6xrt): start the IIM-20670 last

Sensor instances follow start order, and at equal priority the voter
keeps the lowest instance, so whichever IMU starts first is the primary
by default. The IIM-20670's gyro filter cannot be opened past 60 Hz,
which is several milliseconds of delay ahead of the rate loop; it is a
fallback, not a primary. Start the ICM-45686 first and the LSM6DSV80X
ahead of it.

Assisted-by: Claude:claude-fable-5
Signed-off-by: Jacob Dahl <dahl.jakejacob@gmail.com>

* fix(rt117x): define PX4_MAKE_GPIO_EXTI

pps_capture builds its GPIO with PX4_MAKE_GPIO_EXTI, which only the
STM32 micro_hal defines. On i.MX RT an EXTI pin is just an input that
imxrt_gpiosetevent() attaches to, so it is the plain input pinset. Needed
for CONFIG_DRIVERS_PPS_CAPTURE on ark/fmu-v6xrt.

Assisted-by: Claude:claude-fable-5
Signed-off-by: Jacob Dahl <dahl.jakejacob@gmail.com>

* build(ark/fmu-v6xrt): state CONFIG_IMXRT_USDHC_DMA in the defconfig

It is the Kconfig default, so it was already on, but nothing in the
board tree said so and the question of whether SD ran PIO came up twice.

Assisted-by: Claude:claude-fable-5
Signed-off-by: Jacob Dahl <dahl.jakejacob@gmail.com>

* build(ark/fmu-v6xrt): give the logger a 5000-byte stack

High-water 3092 of 3608 with the logger at 368 KiB/s, the tightest task
on the board. The RT1176 has 1.7 MB of SRAM to spend.

Assisted-by: Claude:claude-fable-5
Signed-off-by: Jacob Dahl <dahl.jakejacob@gmail.com>

* docs(ark/fmu-v6xrt): add an IMU section to the README

Bus, start line, ODR, publish rate and full-scale per IMU, why the
publish rates differ, why the instances are ordered as they are, and the
two caveats that lived only in driver comments and PR text: the
LSM6DSV80X publishing its high-g channel, and the IIM-20670's 60 Hz
gyro filter.

Assisted-by: Claude:claude-fable-5
Signed-off-by: Jacob Dahl <dahl.jakejacob@gmail.com>

* docs(ark/fmu-v6xrt): call out the LSM6DSV80X offset temperature coefficient

The heater exists for this die: its high-g zero-g offset moves ~2 mg/degC, so an accel calibration only holds at the temperature it was done at. Say so, and that calibration and flight both happen with the heater at its setpoint.

* docs(ark/fmu-v6xrt): add the ARKV6X-RT flight controller page

The target shipped with no user-facing page, so it was also absent from
the supported-hardware, PAB-compatible and Ethernet board lists.

Photo, store URL and the mechanical/electrical specs still need to come
from ARK.

Assisted-by: Claude:claude-opus-5
Signed-off-by: Jacob Dahl <dahl.jakejacob@gmail.com>

* docs(ark/fmu-v6xrt): restructure the page to the current board-doc shape

The docs maintainer has been asking every recent board PR for the same
things: a Specifications block, a flow-control column on the serial
table, and Power, PWM Outputs, Radio Control, GPS & Compass and Debug
Port sections with anchors. Match that rather than the older ARKV6X
page, which predates it.

Assisted-by: Claude:claude-opus-5
Signed-off-by: Jacob Dahl <dahl.jakejacob@gmail.com>

* docs(ark/fmu-v6xrt): mark the unpublished specs with TODO

Photo, product page, input voltage, current draw, dimensions and weight
are not public yet. Leave a marker where each belongs rather than a
silent gap, so a reviewer can see what is outstanding and the PR
checklist has something to point at.

Assisted-by: Claude:claude-opus-5
Signed-off-by: Jacob Dahl <dahl.jakejacob@gmail.com>

* docs(ark/fmu-v6xrt): the heater is not specific to the LSM6DSV80X

Every IMU on every ARK board gets a heater; this die is only the most temperature-sensitive one, which is why the heater targets it.

* fix(ark/fmu-v6xrt): regulate the heater on the ICM-45686

HEATER1_SENS_ID pointed at the LSM6DSV80X because its high-g channel drifted 2 mg/°C. The driver now publishes that part's low-g channel (0.07 mg/°C), so the die that flies is the one to hold at temperature. The pad warms the whole board either way; this only picks the feedback sensor.

* fix(ark/fmu-v6xrt): single-IMU selection like ark/fmu-v6x

The imxrt arch defaults turn on multi-EKF (EKF2_MULTI_IMU 3, SENS_IMU_MODE 0), so the EKF2 selector picked the primary by test ratio and at rest it could land on any of the three IMUs. Override to the voter with one primary, as ark/fmu-v6x does.

* fix(ark/fmu-v6xrt): drop the Skynode TELEM2 mavlink autostart

rc.board_mavlink came along with the px4/fmu-v6xrt copy: on base ids 009-011 it starts mavlink at 3 Mbaud on TELEM2 and locks the port. Those ids are Skynode carriers; on an ARK carrier that ever reports one, TELEM2 would be silently taken. ark/fmu-v6x has no such file.

Assisted-by: Claude:claude-fable-5
Signed-off-by: Jacob Dahl <dahl.jakejacob@gmail.com>

* feat(ark/fmu-v6xrt): whitelist the generic airframes like ark/fmu-v6x

Assisted-by: Claude:claude-fable-5
Signed-off-by: Jacob Dahl <dahl.jakejacob@gmail.com>

* chore(ark/fmu-v6xrt): align the driver and module set with ark/fmu-v6x

Add what v6x carriers can use: batt_smbus, payload_deliverer, pca9685_pwm_out (started on PCA9685_EN_BUS like v6x), and the ADIS16507 and SCH16T external IMUs; add the mavlink-dev variant and the rover HIWONDER_EMM. Drop what this board cannot use or does not want: battery_status (no analog battery channels, BOARD_BATT_V_LIST is {-1,-1}), local_position_estimator, septentrio.

Assisted-by: Claude:claude-fable-5
Signed-off-by: Jacob Dahl <dahl.jakejacob@gmail.com>

* refactor(ark/fmu-v6xrt): name the eighth UART TEL4 like ark/fmu-v6x

The port was EXT2 after the px4/fmu-v6xrt copy, so the same carrier connector is SER_TEL4_* on ark/fmu-v6x and SER_EXT2_* here. One name across the product line.

Assisted-by: Claude:claude-fable-5
Signed-off-by: Jacob Dahl <dahl.jakejacob@gmail.com>

* docs(ark/fmu-v6xrt): correct the PFD frequency comments

SYS_PLL2 PFD3 is 432 MHz, not 216 — the value FlexIO1 divides by 4 to
reach the 108 MHz that BOARD_FLEXIO_PREQ assumes for DShot timing.

Assisted-by: Claude:claude-opus-5[1m]
Signed-off-by: Jacob Dahl <dahl.jakejacob@gmail.com>

* build(ark/fmu-v6xrt): default eth0 to static 192.168.0.4 like ark/fmu-v6x

The two ARK products should present the same ethernet identity. netman writes
the compiled-in default into the carrier EEPROM on first boot, so the v6XRT
left a fresh carrier on DHCP with a ~70 s fallback to 10.41.10.2, an address
nothing at ARK uses, while the v6X has been 192.168.0.4 since #24281.

Assisted-by: Claude:claude-fable-5
Signed-off-by: Jacob Dahl <dahl.jakejacob@gmail.com>

* perf(ark/fmu-v6xrt): run the DShot cycle from ITCM

Same list as px4/fmu-v6xrt: up_dshot_trigger ran over XIP and its critical section measured 5.6 µs worst case on cache misses at 800 Hz.

Assisted-by: Claude:claude-fable-5
Signed-off-by: Jacob Dahl <dahl.jakejacob@gmail.com>

* fix(ark/fmu-v6xrt): start the onboard baro unconditionally

SENS_INT_BARO_EN gated the BMP390 even though it is started as an external
sensor, so the parameter never meant what it says here, and it is being
replaced by CAL_BAROn_PRIO.

* fix(ark/fmu-v6xrt): receive RC on LPUART6 RX

The NXP v6XRT template single-wires on TX because its RC net is the TX pad. This board wires PAB X1-70 (carrier SBUS/RC pin 2) to LPUART6 RX.

Signed-off-by: Jacob Dahl <dahl.jakejacob@gmail.com>

* fix(ark/fmu-v6xrt): pin ICM-45686 as the primary IMU

The three IMUs run at equal voter priority, so the sensor voter selects
the primary by whichever validates first at boot and keeps it — a
non-deterministic race that on a test flight landed the primary on the
LSM6DSV80X instead of the ICM-45686. Seed the ICM's calibration slot with
a higher priority so selection is deterministic; the voter still fails
over to the other IMUs if it degrades.

Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Jacob Dahl <dahl.jakejacob@gmail.com>

* docs(ark/fmu-v6xrt): add board photos and correct the user page

The remaining TODOs were the photos, store URL, and the v6x electrical/mechanical numbers. The IMU section and serial table still described the LSM6DSV80X high-g channel, a heater on that die, and EXT2.

Assisted-by: Grok:grok-4.6
Signed-off-by: Jacob Dahl <dahl.jakejacob@gmail.com>

---------

Signed-off-by: alexklimaj <alex@arkelectron.com>
Signed-off-by: Jacob Dahl <dahl.jakejacob@gmail.com>
Co-authored-by: Jacob Dahl <dahl.jakejacob@gmail.com>
2026-08-28 22:54:00 -06:00
Hamish Willee a906b72868 docs(docs): Fix external links and add ignore deferals to retested cases (#28400) 2026-08-27 15:53:41 +10:00
Hamish Willee 8ed15e6b19 docs(docs): Fix broken external links (#28300)
* docs(docs): Fix external links and associated tidy
* docs(docs): Fix up sidebar discontinued convention
* docs(docs): Fix up alternate sidebar
2026-08-20 11:53:24 +10:00
cbb0badae7 feat(boards): add Amovlab Flycore support (#27407)
* board(amovlab): add Flycore FMU support

* board(amovlab): polish Flycore board port and docs

* Update boards/amovlab/flycore/src/hw_config.h

Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com>

* Update boards/amovlab/flycore/src/hw_config.h

Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com>

* docs(docs): Subedit/prettier

* docs: expand Amovlab Flycore documentation

* docs: fix Flycore documentation links

* docs: add Flycore product image

* docs(docs): subedit

* docs: document Flycore connector types

* docs: clarify Flycore connector standard note

* boards: address Flycore bootloader and config review

* boards: update Flycore USB vendor string

* boards: update Flycore board ID

* docs: update Flycore board ID

* boards: update Flycore bootloader binary

* boards: update Flycore USB VID/PID

* Add Flycore license overview and update USB PID

* boards: enable pthread mutex types for Flycore

* boards: use allocated Flycore USB PID

* Apply suggestion from @hamishwillee

---------

Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com>
Co-authored-by: Hamish Willee <hamishwillee@gmail.com>
2026-08-04 12:23:48 +12:00
RogerSJLuo 544bccbc1e [docs]: correct manufacturer URL for Accton Godwit G-A1 (#28111)
[boards/docs]: fix manufacturer URL for Accton Godwit G-A1 which they were cubepilot by mistake. 
Co-authored-by: Roger Luo <roger_luo@accton.com>
2026-07-30 00:08:51 -04:00
PX4BuildBot 12f99ac841 docs: auto-sync metadata [skip ci]
Co-Authored-By: PX4 BuildBot <bot@px4.io>
2026-07-02 07:04:51 +00:00
Hamish Willee 96e760a782 docs(docs): Fix almost all broken external links (#27790)
* docs(docs): Add missing uorb topics sidebar
* docs(docs): discontinue cuav v5 plus/nano
* docs(docs): Fix 404 and 303 status HTTP links
* docs(docs): more link fixes
* update(drivers): Docs fix to fix up link
* docs(docs): Fix up all remaining  broken links and add exclusions
2026-07-02 16:58:40 +10:00
CUAV ChenandHamish Willee 73c51abfe3 feat(boards): cuav/x25-mega board support (#26664)
---------

Signed-off-by: Ramon Roche <mrpollo@gmail.com>
Co-authored-by: Hamish Willee <hamishwillee@gmail.com>
2026-06-29 19:04:51 -07:00
PX4BuildBot 9138ab7452 docs: auto-sync metadata [skip ci]
Co-Authored-By: PX4 BuildBot <bot@px4.io>
2026-06-29 21:43:07 +00:00
VincelloandHamish Willee 9ef2131d3b feat(boards): add corvon_v5 flight controller (#26286)
* add files

* add corvon_V5 docs

docs: fix connectors image path

* docs: address Copilot formatting suggestions

* Subedit

* docs: add radio control wiring details for corvon_V5

* Update docs/en/flight_controller/corvon_V5.md

Co-authored-by: Hamish Willee <hamishwillee@gmail.com>

* boards/corvon: rename V5 subdirectory to v5

This renames the corvon_V5 board to corvon_v5 to conform to PX4 lowercase naming conventions as requested by @mrpollo. Renames target files, docs, and assets accordingly.

* Apply suggestion from @hamishwillee

Co-authored-by: Hamish Willee <hamishwillee@gmail.com>

* docs: add DSU7 debug port pinout and warnings for corvon_v5

This addresses reviewer feedback to include debug port information, placed immediately after the Radio Control section as requested.

* Apply suggestion from @hamishwillee

* fix(boards/corvon_v5): remove unused heater and temperature_compensation

- heater: board has no IMU heater; fixes build after #26325 (requires HEATER_NUM)
- temperature_compensation: modern IMU doesn't need it, follow #27015

Signed-off-by: holydust <holydust@live.ca>

* docs(update): Subedit. Add pwm outputs and gps

* Update docs/en/flight_controller/corvon_v5.md

* Update docs/en/flight_controller/corvon_v5.md

Co-authored-by: Hamish Willee <hamishwillee@gmail.com>

* docs(corvon_v5): add UART flow control, power details, fix broken links

* docs(corvon_v5): fix UART table typo

* fix(boards/corvon_v5): remove unused PX4IO macros. Board has no PX4IO co-processor

Signed-off-by: holydust <holydust@live.ca>

* Apply suggestions from code review

Co-authored-by: Hamish Willee <hamishwillee@gmail.com>

* docs(corvon_v5): update board images

Signed-off-by: holydust <holydust@live.ca>

* fix(corvon_v5): drop unused dshot, fix can3 and adc comments

- Remove CONFIG_DRIVERS_DSHOT=y from default.px4board: DShot is not
  supported on this board (no IO timer is DShot-configured) and the
  docs already state it as unsupported.
- Fix ADC1_IN8 GPIO list comment from PB8 to PB0 (PB0 is the correct
  pin on STM32F765; matches GPIO_RSSI_IN definition below).
- Clarify CAN3 comment in nuttx-config board.h: the pins are unused
  on CORVON_V5 (no transceiver populated). manifest.c already marks
  CAN3 as not present.
- Update corvon_v5_pinout.xlsx 'All Pinouts' sheet so PA7 (HEATER)
  and PA8/PA15/PH4 (CAN3 RX/TX/SILENT) read 'Unused', matching the
  actual hardware.

Signed-off-by: holydust <holydust@live.ca>

* fix(corvon_v5): use MCS Electronics USB VID/PID

Set VID/PID to 0x16D0/0x152A (MCS Electronics) in the app defconfig
and regenerate the bootloader binary, replacing the 3DR FMUv5 IDs
inherited from the reference config.

Signed-off-by: holydust <holydust@live.ca>

---------

Signed-off-by: holydust <holydust@live.ca>
Co-authored-by: Hamish Willee <hamishwillee@gmail.com>
2026-06-29 14:37:40 -07:00
Alexis Guijarro e91f5af898 docs(boards/3dr/ctrl-n1): add 3DR Control N1 flight controller documentation (#27406) 2026-06-18 14:49:40 +10:00
Ramon RocheandHamish Willee 19d669e542 docs(hardware): rewrite manufacturer board support guide (#27675)
* docs(hardware): rewrite board support guide around real process

The board support guide described a theoretical category-first process that
no longer matches how board support actually happens. Manufacturers were
left unsure of the concrete steps, leading to repeated email requests for
guidance.

Restructure the guide around the actual GitHub-driven flow: build your own
firmware target, reserve a board ID via a PX4-Bootloader PR, provide a
unique USB VID/PID, demonstrate flight with logs, and open the PR. Keep the
support categories as a reference section that explains support
responsibility rather than process.

Spell out that QGroundControl uses the USB VID/PID to identify hardware, and
warn that reusing another vendor's pair causes misidentification. Promote
the ArduPilot board-ID alignment note and point it at the current hwdef
location. Demote VER/REV ID to a clearly-deprecated edge case: explain the
resistor/EEPROM mechanism and its original cross-vendor baseboard/FMU intent,
note the ecosystem has deviated from it, and that Dronecode no longer offers
standards validation. Update the Discord link to chat.dronecode.org.

Signed-off-by: Ramon Roche <mrpollo@gmail.com>

* docs(hardware): align porting guide with board support guide

The porting guide's 'Officially Supported Hardware' section restated the
board support process and contradicted the rewritten board support guide.
It also told manufacturers to ship hardware to the dev team for port
validation, a service Dronecode no longer offers.

Replace that section with a short pointer to the board support guide, which
is now the single source of truth for the support process, and keep only the
high-level support benefits and maintenance expectations. The technical
porting content (architecture, file layout, host OS config, RC UART wiring)
is unchanged.

Signed-off-by: Ramon Roche <mrpollo@gmail.com>

* docs(hardware): make board support guide discoverable for manufacturers

The board support guide was only reachable by navigating into the hardware
integration section. A manufacturer browsing the user-facing autopilot pages,
the exact audience, had no path to it, and one of those pages still stated
the obsolete 4-month compatibility commitment.

Add 'how to get your board supported' pointers from the manufacturer-supported
and experimental autopilot pages, the flight controller index, and the
development landing page. Remove the stale 4-month rule from the
manufacturer-supported page. Strengthen the guide's opening paragraph so the
phrases manufacturers actually search appear up front.

Word the links to avoid conflating the guide (how to get a board supported)
with the 'Manufacturer Supported' category (one of several support levels).

Signed-off-by: Ramon Roche <mrpollo@gmail.com>

* docs(docs): Minor tweaks

---------

Signed-off-by: Ramon Roche <mrpollo@gmail.com>
Co-authored-by: Hamish Willee <hamishwillee@gmail.com>
2026-06-17 18:11:37 +10:00
Hamish Willee 4b808ca42e docs(fc): Minor typo Narinc 2026-06-16 13:11:02 -07:00
Ramon Roche ed9bbf3470 docs(narinfc/h7): fix broken RC_INPUT link
Remove broken anchor link to modules_driver.md#rc-input which does not
exist. Use inline code formatting instead.

Signed-off-by: Ramon Roche <mrpollo@gmail.com>
2026-06-16 13:11:02 -07:00
Ramon Roche ea22f5479e docs(narinfc/h7): add flight controller documentation
Add hardware documentation for the VOLOLAND NarinFC-H7 flight controller
including pinouts, serial port mapping, PWM output groups, and analog
inputs. Fix version badge to v1.17 and clarify RC_IN is wired directly
to FMU via RC_INPUT driver.

Based on work by @vololand and @hamishwillee from PR #26542.

Signed-off-by: Ramon Roche <mrpollo@gmail.com>
2026-06-16 13:11:02 -07:00
PX4BuildBot 8100ba9045 docs: auto-sync metadata [skip ci]
Co-Authored-By: PX4 BuildBot <bot@px4.io>
2026-06-08 22:07:13 +00:00
VincelloandHamish Willee f808ed1560 feat(boards): add corvon_743v2 flight controller (#27569)
feat(boards): add corvon_743v2 flight controller + Documentation

Co-authored-by: Hamish Willee <hamishwillee@gmail.com>
2026-06-08 17:42:26 -04:00
Julian OesandHamish Willee 39ee0f5d18 feat(boards): add support for AEDROXH7 flight controller (#27226)
* feat(boards): add support for AEDROXH7 flight controller

STM32H743-based FPV / racing flight controller from AEDROX.

Brings up:
- ICM-42688-P IMU on SPI2
- DPS310 baro on internal I2C2
- W25N NAND flash on SPI3 with littlefs at /fs/flash
- MAX7456 analog OSD on SPI1
- 8 motor outputs (TIM1 + TIM8) all bidirectional-DShot capable
- CAN1
- External I2C1 connector for compass / sensors
- 6 UARTs (TEL1, GPS1, RC, TEL2, ESC telemetry, debug console on UART8),
- Two user GPIOs on the M5-M8 connector, VTX power and camera-switch GPIOs,
buzzer on PA7 (active-buzzer transistor low-side switch), battery V/I sensing
via ADC1.

Board ID 1198 shared with ArduPilot's AP_HW_AEDROXH7 entry.
USB enumerates as 0x16D0:0x14FE with VENDORSTR "AEDROX".

Signed-off-by: Julian Oes <julian@oes.ch>

* docs(docs): Minor subedit

---------

Signed-off-by: Julian Oes <julian@oes.ch>
Co-authored-by: Hamish Willee <hamishwillee@gmail.com>
2026-06-03 06:54:43 +12:00
PX4BuildBot 9fcdf51415 docs: auto-sync metadata [skip ci]
Co-Authored-By: PX4 BuildBot <bot@px4.io>
2026-06-02 18:49:34 +00:00
Julian Oes f94aedf1f0 feat(boards): add CBUnmanned H753-SOM flight controller (#27234)
* feat(boards): add CBUnmanned H753-Stamp flight controller

* Update board_id to 1302

* docs: update CBUnmanned H753-Stamp board docs

Apply review feedback: correct the I2C bus count (add internal bus),
clarify SPI (IMUs on a dedicated internal bus), note the debug console
alongside the user UARTs, and describe how the board is powered from an
external 5 V supply with separate battery voltage sensing.

Add the pinout image and a PWM Outputs section.

Signed-off-by: Julian Oes <julian@oes.ch>

* refactor(boards): rename CBUnmanned H753-Stamp to H753-SOM

Rename the board directory, build target (cbunmanned_h753-som), USB
product strings, docs page, asset directory and pinout image, and the
bundled bootloader binary from -Stamp to -SOM. The hardware is a
System-on-Module, so SOM is the accurate name.

Signed-off-by: Julian Oes <julian@oes.ch>

---------

Signed-off-by: Julian Oes <julian@oes.ch>
2026-06-03 06:40:19 +12:00
Hamish Willee dfc08eed28 docs(docs): Link fixes, _sidebar, uorb docs generator tweak (#27482) 2026-05-28 10:44:16 +10:00
Hamish Willee ac4efcf83e docs(docs): Ark6s shrink images (#27477) 2026-05-27 17:47:37 +10:00
Jacob Dahl 773967b547 docs(arkv6s): add flight controller documentation (#27383)
* docs(arkv6s): add flight controller documentation

Signed-off-by: Jacob Dahl <dahl.jakejacob@gmail.com>

* docs(arkv6s): add product photo and note single-IMU variant

Drop in docs/assets/flight_controller/arkv6s/ark_v6s_front.jpg
so the page renders the board photo it already references, and
align the intro with the upstream description by spelling out
that the V6S is the single-IMU variant of the V6X.

* docs(arkv6s): add bootloader UART note, fix arkv6x RAM typo

Add the bootloader serial port note (TELEM1-only in bootloader mode)
to the ARKV6S docs, matching the ARKV6X docs. Also fix the ARKV6X
MCU spec listing "1MB Flash" instead of "1MB RAM".

---------

Signed-off-by: Jacob Dahl <dahl.jakejacob@gmail.com>
2026-05-26 14:23:11 -06:00
Jacob Dahl bb013a69d3 docs(arkv6x): note bootloader UART7/TELEM1 mapping (#27429)
* docs(arkv6x): note bootloader UART7/TELEM1 mapping

The ARKV6X bootloader enables only UART7 (TELEM1), but the existing
serial port table reflects the runtime mapping where /dev/ttyS0 is
GPS1. Users flashing firmware over UART with px_uploader.py hit a
dead end when targeting GPS1 because no other UART responds in
bootloader mode.

* docs(arkv6x): fix uploader script name and add link

Script is named px4_uploader.py in the Tools directory; link to it
on GitHub so readers can find it.
2026-05-26 13:50:47 -06:00
Julian Oes 174a6aab6f feat(mklittlefs): add command to format littlefs filesystems
Add an NSH command to format a device with littlefs, analogous to
mkfatfs for FAT filesystems. The command unmounts the mount point,
then remounts with forceformat to format and mount in one step.

Enable the command on boards that use littlefs as primary storage
(airbrainh743 and kakuteh7v2), and document it in the airbrainh743
flight controller page as a recovery procedure for a corrupted
flash filesystem.

Usage: mklittlefs /dev/mtd0 /fs/flash
2026-04-23 10:30:14 +12:00
tompsontan a3d51a62a2 boards:x-mav:ap-h743r1:Switch to SPL06 Only Due to Indistinguishable DPS310 and SPL06 IDs. (#26791) 2026-04-09 16:18:56 +10:00
CUAV Chen 8b870e364e docs(docs): Update CUAV X25 Series Doc (#26882) 2026-04-02 14:24:42 +11:00
Hamish Willee 4cbdc3dec6 docs(updates): Link fixes and orphan image removals (#26925)
* docs(updates): Link fixes and orphan image removals
* docs(delete): Remove orphaned translations
2026-04-01 13:51:06 +11:00
PX4BuildBot b6bbaa1c53 docs: auto-sync metadata [skip ci]
Co-Authored-By: PX4 BuildBot <bot@px4.io>
2026-03-19 03:28:54 +00:00
4cf95fdcb4 fix(boards): align LED indices and add docs for corvon 743v1 (#26699)
* boards: corvon 743v1 support (Docs and LED alignment)

This PR addresses #24769 by providing the required official documentation, while simultaneously aligning the board's LED semantics entirely with the PX4 standard.

Key Changes:

- Add complete corvon 743v1 hardware documentation and manufacturer link.

- Fix LED out-of-bounds bug and strictly align RGB states to Pixhawk standard (LED_BLUE=0, LED_RED=1, LED_GREEN=3).

- Update bootloader pin config (hw_config.h) to use red LED for boot/error, and update pre-built bootloader.bin.

* Prettier and file reduce

* docs: address reviewer feedback & board ID fix

* Apply suggestion from @hamishwillee

Co-authored-by: Hamish Willee <hamishwillee@gmail.com>

* docs: resolve final reviewer feedback (PPM, Debug Port, Manufacturer List)

---------

Co-authored-by: Hamish Willee <hamishwillee@gmail.com>
Co-authored-by: Ramon Roche <mrpollo@gmail.com>
2026-03-19 14:17:21 +11:00
Hamish Willee 57cf570bb4 fix(docs): Fix internal docs links (#26718) 2026-03-12 14:29:35 +11:00
Hamish Willee 8340415962 docs: Removed orphaned images and fix some broken links (#26661)
* Removed orphaned docs and ttempt to fix some broken links

* Fix up _sidebar
2026-03-06 08:23:18 +11:00
Hamish Willee b37733459d docs: Codespell check on English sources + swd fixes (#26657) 2026-03-05 12:50:59 +11:00
Hamish Willee 1cb2debbb9 docs: Remove all discontinued FCs (#26642) 2026-03-05 08:03:07 +11:00
Hamish Willee 2fd131d3cf Link fixes 4 (#26633)
* Airframe - replace Babyshark with QAV250

* Link fixes
2026-03-04 09:45:50 +11:00
Hamish Willee 209c971c1b docs: Link fixes in docs - including 404 fixes (#26605)
* Redirect 301/308 HTTP link fixes
* Easy 404 fixes - easy
* Add internal anchor fixes and generate msg docs fix
2026-02-28 17:09:53 +11:00
PX4BuildBot affc18a056 docs: auto-sync metadata [skip ci]
Co-Authored-By: PX4 BuildBot <bot@px4.io>
2026-02-27 20:47:43 +00:00
CUAV Chen 25cfb4f790 boards: Add CUAV X25-SUPER board 2026-02-27 12:39:32 -08:00
Hamish Willee c0af8b9952 docs: Link fixes such as 301 redirects (#26586) 2026-02-26 18:33:37 +11:00