* refactor(msg): rename SensorGps to SensorGnss and add VehicleGnss
GPS is one constellation; the receivers and the rest of PX4 handle GNSS. Field names lose their units (latitude, speed_accuracy, course, ...), which move into the metadata comments. The sensors module's output becomes VehicleGnss on vehicle_gnss: the selected receiver's sample next to what the sensors module adds to it (corrected sample time, antenna position, selected instance), so a consumer can tell the two apart and later selection and check results have a place to go.
Assisted-by: Claude:claude-opus-5-5
* refactor(drivers/gps): publish sensor_gnss
Follows the SensorGps to SensorGnss and vehicle_gps_position to VehicleGnss rename.
Assisted-by: Claude:claude-opus-5-5
* refactor(drivers/septentrio): publish sensor_gnss
Follows the SensorGps to SensorGnss and vehicle_gps_position to VehicleGnss rename.
Assisted-by: Claude:claude-opus-5-5
* refactor(drivers/pps_capture): read sensor_gnss
Follows the SensorGps to SensorGnss and vehicle_gps_position to VehicleGnss rename.
Assisted-by: Claude:claude-opus-5-5
* refactor(lib/gnss): select receivers on sensor_gnss
Follows the SensorGps to SensorGnss and vehicle_gps_position to VehicleGnss rename.
Assisted-by: Claude:claude-opus-5-5
* refactor(sensors): publish VehicleGnss on vehicle_gnss and rename SENS_GPS* to SENS_GNSS*
The sensors module's output nests the selected receiver's sample, with the corrected sample time, antenna position and selected instance next to it. SENS_GPS_MASK/TAU/PRIME and SENS_GPSn_ID/OFFX/OFFY/OFFZ/DELAY take the SENS_GNSS name the heading parameters already use; saved parameters migrate on import, and the EKF2_GPS_POS/EKF2_GPS_DELAY translations now land on the new names directly.
Assisted-by: Claude:claude-opus-5-5
* refactor(logger): log sensor_gnss and vehicle_gnss
Follows the SensorGps to SensorGnss and vehicle_gps_position to VehicleGnss rename.
Assisted-by: Claude:claude-opus-5-5
* refactor(ekf2): fuse vehicle_gnss
Follows the SensorGps to SensorGnss and vehicle_gps_position to VehicleGnss rename.
Assisted-by: Claude:claude-opus-5-5
* refactor(replay): replay vehicle_gnss
Follows the SensorGps to SensorGnss and vehicle_gps_position to VehicleGnss rename.
Assisted-by: Claude:claude-opus-5-5
* refactor(local_position_estimator): read vehicle_gnss
Follows the SensorGps to SensorGnss and vehicle_gps_position to VehicleGnss rename.
Assisted-by: Claude:claude-opus-5-5
* refactor(attitude_estimator_q): read vehicle_gnss
Follows the SensorGps to SensorGnss and vehicle_gps_position to VehicleGnss rename.
Assisted-by: Claude:claude-opus-5-5
* refactor(lib/terrain_estimation): take sensor_gnss
Follows the SensorGps to SensorGnss and vehicle_gps_position to VehicleGnss rename.
Assisted-by: Claude:claude-opus-5-5
* refactor(lib/wind_estimator): read vehicle_gnss in the replay script
Follows the SensorGps to SensorGnss and vehicle_gps_position to VehicleGnss rename.
Assisted-by: Claude:claude-opus-5-5
* refactor(vision_target_estimator): read vehicle_gnss
Follows the SensorGps to SensorGnss and vehicle_gps_position to VehicleGnss rename.
Assisted-by: Claude:claude-opus-5-5
* refactor(navigator): read vehicle_gnss
Follows the SensorGps to SensorGnss and vehicle_gps_position to VehicleGnss rename.
Assisted-by: Claude:claude-opus-5-5
* refactor(commander): read sensor_gnss and vehicle_gnss
Follows the SensorGps to SensorGnss and vehicle_gps_position to VehicleGnss rename.
Assisted-by: Claude:claude-opus-5-5
* refactor(mavlink): stream sensor_gnss and vehicle_gnss
Follows the SensorGps to SensorGnss and vehicle_gps_position to VehicleGnss rename.
Assisted-by: Claude:claude-opus-5-5
* refactor(uxrce_dds_client): bridge vehicle_gnss
Follows the SensorGps to SensorGnss and vehicle_gps_position to VehicleGnss rename.
Assisted-by: Claude:claude-opus-5-5
* refactor(zenoh): bridge vehicle_gnss
Follows the SensorGps to SensorGnss and vehicle_gps_position to VehicleGnss rename.
Assisted-by: Claude:claude-opus-5-5
* refactor(failure_injection): inject GNSS failures on sensor_gnss
Follows the SensorGps to SensorGnss and vehicle_gps_position to VehicleGnss rename.
Assisted-by: Claude:claude-opus-5-5
* refactor(drivers/ins): publish sensor_gnss
Follows the SensorGps to SensorGnss and vehicle_gps_position to VehicleGnss rename.
Assisted-by: Claude:claude-opus-5-5
* refactor(drivers/uavcan): publish sensor_gnss
Follows the SensorGps to SensorGnss and vehicle_gps_position to VehicleGnss rename.
Assisted-by: Claude:claude-opus-5-5
* refactor(drivers/uavcannode): read sensor_gnss
Follows the SensorGps to SensorGnss and vehicle_gps_position to VehicleGnss rename.
Assisted-by: Claude:claude-opus-5-5
* refactor(drivers/cyphal): bridge sensor_gnss
Follows the SensorGps to SensorGnss and vehicle_gps_position to VehicleGnss rename.
Assisted-by: Claude:claude-opus-5-5
* refactor(drivers/telemetry): read vehicle_gnss
Follows the SensorGps to SensorGnss and vehicle_gps_position to VehicleGnss rename.
Assisted-by: Claude:claude-opus-5-5
* refactor(drivers/rc): read vehicle_gnss for telemetry
Follows the SensorGps to SensorGnss and vehicle_gps_position to VehicleGnss rename.
Assisted-by: Claude:claude-opus-5-5
* refactor(drivers/osd): read vehicle_gnss
Follows the SensorGps to SensorGnss and vehicle_gps_position to VehicleGnss rename.
Assisted-by: Claude:claude-opus-5-5
* refactor(drivers/transponder): read sensor_gnss
Follows the SensorGps to SensorGnss and vehicle_gps_position to VehicleGnss rename.
Assisted-by: Claude:claude-opus-5-5
* refactor(boards/modalai): publish sensor_gnss from the voxl2 drivers
Follows the SensorGps to SensorGnss and vehicle_gps_position to VehicleGnss rename.
Assisted-by: Claude:claude-opus-5-5
* refactor(examples): publish sensor_gnss and read vehicle_gnss
Follows the SensorGps to SensorGnss and vehicle_gps_position to VehicleGnss rename.
Assisted-by: Claude:claude-opus-5-5
* refactor(simulation): publish sensor_gnss
Follows the SensorGps to SensorGnss and vehicle_gps_position to VehicleGnss rename.
Assisted-by: Claude:claude-opus-5-5
* refactor(gnss): name GNSS variables gnss in the sensors module and receiver drivers
GPS is one constellation. Identifiers that hold or handle GNSS samples, or bind to the renamed parameters, follow the message and parameter rename; classes, files, modules and names tied to parameters that keep GPS stay.
Assisted-by: Claude:claude-opus-5-5
* refactor(gnss): name GNSS variables gnss in the estimators and navigator
GPS is one constellation. Identifiers that hold or handle GNSS samples, or bind to the renamed parameters, follow the message and parameter rename; classes, files, modules and names tied to parameters that keep GPS stay.
Assisted-by: Claude:claude-opus-5-5
* refactor(gnss): name GNSS variables gnss in commander, mavlink and failure injection
GPS is one constellation. Identifiers that hold or handle GNSS samples, or bind to the renamed parameters, follow the message and parameter rename; classes, files, modules and names tied to parameters that keep GPS stay.
Assisted-by: Claude:claude-opus-5-5
* refactor(gnss): name GNSS variables gnss in the remaining drivers and simulation
GPS is one constellation. Identifiers that hold or handle GNSS samples, or bind to the renamed parameters, follow the message and parameter rename; classes, files, modules and names tied to parameters that keep GPS stay.
Assisted-by: Claude:claude-opus-5-5
* docs(gnss): reference sensor_gnss, vehicle_gnss and SENS_GNSS* parameters
The upgrade guide covers the topic, field, ROS 2, parameter and Cyphal register renames.
Assisted-by: Claude:claude-opus-5-5
* fix(boards): name EKF2::UpdateGnssSample in the fmu-v6xrt ITCM lists
The rename left the old UpdateGpsSample symbol in the lists, so the ITCM check fails and the function drops out of ITCM on the boards it doesn't check.
Assisted-by: Claude:claude-opus-5-5
* chore(drivers/gps): bump PX4-GPSDrivers to the merged sensor_gnss rename
The submodule pointed at the PX4-GPSDrivers#243 branch commit; #243 is merged.
Assisted-by: Claude:claude-opus-5-5
* docs(msg): restore WGS84 in SensorGnss and point VehicleGlobalPosition at vehicle_gnss
The rename dropped the only mention of the WGS84 datum and ellipsoid, and left VehicleGlobalPosition referring to the removed vehicle_gps_position topic.
Assisted-by: Claude:claude-opus-5-5
* refactor(msg): drop selected_instance from VehicleGnss
receiver.device_id already names the selected receiver, and 0 while blended. The sensor_gnss instance depends on the order drivers advertise at boot, so it doesn't identify a receiver across boots or logs, and nothing reads it. It would also be meaningless on the per-receiver VehicleGnss instances proposed in #28894.
Assisted-by: Claude:claude-opus-5-5
* refactor(gnss): fuse vehicle_gnss.timestamp_sample directly and document the receiver's corrected time
vehicle_gnss.timestamp is now the sensors module's publish time, so EKF2's check of timestamp_sample against it was always true; the sensors module always fills timestamp_sample. The message docs described receiver.timestamp_sample as the driver's uncorrected value, but the sensors module writes the corrected time into it as well.
Assisted-by: Claude:claude-opus-5-5
* docs(msg): point VehicleGnss users at the top-level timestamp_sample
uXRCE-DDS shifts only top-level timestamp and timestamp_sample into agent time, so receiver.timestamp_sample reaches ROS 2 on the PX4 boot clock even though it holds the same value on uORB.
Assisted-by: Claude:claude-opus-5-5
* docs(releases): tell ROS 2 users which VehicleGnss timestamps to read
Only top-level timestamps are converted to ROS time, so a port that reads receiver.timestamp gets the PX4 boot clock, and vehicle_gnss.timestamp is now the sensors module's publish time rather than the receiver's.
Assisted-by: Claude:claude-opus-5-5
* feat(navigator): cache complete mission route data
* refactor(navigator): pack mission requests into a single struct
* rework(navigator): set pending to false instead of full struct reset
* refactor(navigator): remove missionExceedsCacheLimit
* chore(navigator): clean comments
* perf(navigator): syncMissionItem do not fully restart if not needed
* refactor(navigator): better naming and remove unreachable retry
* refactor(navigator): comments
* refactor(navigator): do not restart from scratch on single read failure, restart from failure
* refactor(navigator): use navigator poll to load mission cache and move full mission cache into its own class
* perf(mission-cache): add perf counter for the full mission load
* fix(navigator): keep route cache in sync with DO_JUMP counters
* feat(navigator): add min rate for full navigator update
* docs(docs): add docs for mission route cache
* docs(docs): revert change to auto-generated file
---------
Co-authored-by: jonas <jonspero@me.com>
CONFIG_GPS_SPARTN landed in #27919; call out the opt-in framing path and that keys stay on the receiver.
Signed-off-by: Jacob Dahl <dahl.jakejacob@gmail.com>
Option to keep a gimbal pointing at a fixed attitude, not linked to any user input.
Roll and Yaw angle setpoints are 0, Pitch can be set in separate parameter.
* mavlink: reassemble GPS_RTCM_DATA before GPS injection
* Apply minor comment requested changes
* Simplification: remove _completed_sequence asymetric protection
* Handle RTCM payload length which is an exact multiple of 180
* update docs
* lib gnss: new GpsRtcmMessageFragmenter to send RTCM via GPS_RTCM_DATA.hpp
* fix clang
* Remove RTCM fragmenter
* update docs
* Compatibility fallback for older QGroundControl builds that omit the final zero-length fragment
* mavlink receiver, remove while loop to avoid dead lock
* docs(update): Subedit
Co-authored-by: Hamish Willee <hamishwillee@gmail.com>
* docs(docs): format
---------
Co-authored-by: jonas <jonas.perolini@rigi.tech>
Co-authored-by: Hamish Willee <hamishwillee@gmail.com>
Integrators can declare read-only parameters in a per-board YAML file:
readonly_params.yaml.
There are two ways to define the read-only params:
- "block": default writable, explicitly list params to be locked
- "allow": default readonly, explicitly list params to be writable
Enforcement is activated by `param lock` in rcS after all startup
scripts have run, so board defaults and airframe scripts can still set
params during init.
The feedback via MAVLink uses the new
MAV_PARAM_ERROR_READ_ONLY as part of the PARAM_ERROR message.
* feat(pps_capture): allow selecting GPS receiver by device ID
Add PPS_CAP_GPS_ID parameter to select which GPS receiver's data
is used for PPS timestamp correlation. Matches by device ID rather
than uORB instance index, which avoids dependence on instance ordering.
When set to 0 (default), uses the first available instance for
backward compatibility.
* docs(pps_capture): document PPS_CAP_GPS_ID for multi-GPS setups
* fix(pps_capture): use GPS_MAX_RECEIVERS constant and mark PPS_CAP_GPS_ID reboot-required
* sensors: add per-receiver GPS delay parameters
Add SENS_GPS{0,1}_DELAY params to vehicle_gps_position, following the
same device-ID matching pattern used for antenna offsets. Each receiver
can now have its own measurement delay relative to the IMU.
The delay is applied to timestamp_sample before blending. When PPS time
correction is active it takes priority over the parameter-based delay.
When a GPS driver already provides its own timestamp_sample the
per-receiver delay is not applied on top of it.
* fix(ekf2): remove EKF2_GPS_DELAY and perform param transation
* fix(param_translation): fix GPS param migration return values
Add missing return for EKF2_GPS_POS_Z and remove incorrect return for
EKF2_GPS_DELAY (1-to-many migration should not return PARAM_MODIFIED).
* fix(sensors,ekf2): rename pps_compensation and clarify delay default
* fix(ekf2): account for SENS_GPS*_DELAY in observation buffer sizing
* fix(docs): migrate EKF2_GPS_DELAY param
* moving raptor
bump
compiles and raptor mode appears
hovering with RAPTOR seems to work
Using Raptor to execute offboard commands works (using multirobot f03825a5795a77c5a095f799eeb8e0b646fe7176 to feed the trajectory_setpoint). Requires more testing
simplified rotmat
runtime inference frequency multiple
arming request response reflects actual readiness
adjusting to fit IMU gyro ratemax
relaxing control timing warning thresholds for SITL
Using mode registration to signal if offboard commands should be forwarded to trajectory_setpoint instead of just hardcoding vehicle_status.nav_state == vehicle_status_s::NAVIGATION_STATE_OFFBOARD
adopting new "request_offboard_setpoint" in raptor module
replace offboard seems good
mc_raptor: overwrite offboard parameter
separate raptor config
addendum
Raptor off by default
RAPTOR readme
Loading raptor checkpoint from tar works.
check if load was successful
refactoring: cutting out the pure C interface to allow direct testing of the policy input/output behavior from the file, without fully loading it into memory first
adapter not needed anymore
ripping out test observation mode (not used in a long time)
fixing warnings
bump RLtools to fix the remaining warnings
Loading RAPTOR checkpoint from sdcard seems to work on FMU-6C
embedding Raptor policy into flash works again
also printing checkpoint name when using the embedded policy
cleaner handling of the checkpoint name
back to reading from file
ripping out visual odometry checks
cleaner
more debug but no success
bump rlt
bump
pre next rebase
we can publish the no angvel update because we latch onto it with the scheduled work item anyways
this kind of runs on the 6c
still bad
SIH almost flying
saving stale traj setpoint yaw
new error. timestamp not the problem anymore
bump rlt; SIH works with executor
shaping up
bumping blob (include tar checkpoint)
cleaning up
fixing formatting
update readme
* moving raptor
bump
compiles and raptor mode appears
hovering with RAPTOR seems to work
Using Raptor to execute offboard commands works (using multirobot f03825a5795a77c5a095f799eeb8e0b646fe7176 to feed the trajectory_setpoint). Requires more testing
simplified rotmat
runtime inference frequency multiple
arming request response reflects actual readiness
adjusting to fit IMU gyro ratemax
relaxing control timing warning thresholds for SITL
Using mode registration to signal if offboard commands should be forwarded to trajectory_setpoint instead of just hardcoding vehicle_status.nav_state == vehicle_status_s::NAVIGATION_STATE_OFFBOARD
adopting new "request_offboard_setpoint" in raptor module
replace offboard seems good
mc_raptor: overwrite offboard parameter
separate raptor config
addendum
Raptor off by default
RAPTOR readme
Loading raptor checkpoint from tar works.
check if load was successful
refactoring: cutting out the pure C interface to allow direct testing of the policy input/output behavior from the file, without fully loading it into memory first
adapter not needed anymore
ripping out test observation mode (not used in a long time)
fixing warnings
bump RLtools to fix the remaining warnings
Loading RAPTOR checkpoint from sdcard seems to work on FMU-6C
embedding Raptor policy into flash works again
also printing checkpoint name when using the embedded policy
cleaner handling of the checkpoint name
back to reading from file
ripping out visual odometry checks
cleaner
more debug but no success
bump rlt
bump
pre next rebase
we can publish the no angvel update because we latch onto it with the scheduled work item anyways
this kind of runs on the 6c
still bad
SIH almost flying
saving stale traj setpoint yaw
new error. timestamp not the problem anymore
bump rlt; SIH works with executor
shaping up
bumping blob (include tar checkpoint)
cleaning up
fixing formatting
update readme
updating gitignore
* fixing format and declaring submodules as cmake dependencies
* adding uORB message documentation
* fixing comment alignment
* Adding option to restrict mc_raptor to not listen to the trajectory_setpoint (use the position and yaw at activation time as reference instead)
* bump RLtools; relax timing thresholds and adding real world readme
* smooth traj tracking performance
* Measuring trajectory_setpoint timing (providing stats in raptor_status); reverting accidental .gitignore modification
* More ideomatic way of setting the path to the policy checkpoint
* Reset trajectory_setpoint on raptor mode activation
* Adding internal trajectory generation (feeding trajectory_setpoint over Mavlink is too noisy). Quite agile trajectory tracking, good performance
* stable flight
* Update msg/versioned/RaptorInput.msg
Co-authored-by: Hamish Willee <hamishwillee@gmail.com>
* adopting message formatting conventions
* sort raptor.px4board
* Archiving RegisterExtComponentRequestV1.msg
* Add message versioning for VehicleStatus v2 and RegisterExtComponentRequest v2
* fixing formatting
* making internal reference configurable via command
* RAPTOR docs wip
* raptor internal reference documentation
* Finishing RAPTOR docs first draft
* adding logging instructions
* Fixing missing command documentation test error
* fixing format
* adding motor layout warning
* raptor minimal subedit - prettier, images etc
* Improve intro
* Fix up Neural_Networks version
* Mentioning "Adaptive" in the RAPTOR documentation's title
* Adding clarifications about the internal reference trajectory generator
* Removing "foundation policy" wording
* Fixing new-line check
* Removing redundant (evident through directory hierarchy) raptor_ from filenames
* Unifying Neural Network docs (mc_nn_control and mc_raptor) under the "Neural Network" topic
* Fix to standard structure
* Making the distinction between mc_nn_control and mc_raptor more clear and fixing the comparison table
* Removing trajectory_setpoint forwarding flag from external mode registration request and from the vehicle status
* Trivial layout and wording fixes
* fixing docs error
---------
Co-authored-by: Hamish Willee <hamishwillee@gmail.com>
* Add tflm to px4 with module
- Add TensorFlow Lite Micro(TFLM) as a library in px4
- Make a module that uses neural network inference for control, which uses TFLM for inference
- Make board config files for PX4 with neural module
* Added neural flight mode
* Add posibility to read of inference times
* Fix comments from review:
- Switch ssh link to https link in submodule
- Remove mc_nn_control from startup
* Add tflm to px4 with module
- Add TensorFlow Lite Micro(TFLM) as a library in px4
- Make a module that uses neural network inference for control, which uses TFLM for inference
- Make board config files for PX4 with neural module
* Added neural flight mode
* Add posibility to read of inference times
* Remove auto start
* Add logging from neural control module
* Fix automatic startup to only be when module is included
* Switch to flight mode registration
* Add docs
* Change min/max/coeff to actual parameters
* add figures to neural network docs
* Switch to e2e network
* Remove toolchain changes and replace with instructions in docs
* Get ready for merge after toolchain upgrade
* switch back to submodule
* Try to figure out cmake
* Get CI working with new toolchain
* Remove fork dependency
* Finalize PR
* fix toolchain inclusion
* Fix ctype_base.h include
* Cleanup includes for TFLM
* Remove redundant std
* Update FW module names in board files
* Fix docs
* Remove cstdlib copy
* Copy header from nuttx
* Prettier, markup, layout
* NeuralControl.msg - update uorb comments to current standard
* Add description to neural topic
* Fix typo
* Typo
* TFLM and Module utitlities
* Neural networks top level
* Update docs
* Add manual control
* Update docs
* Revert the manual control attempt
* Update docs/en/advanced/nn_module_utilities.md
* Add posibility to set trajectory setpoint with manual control
---------
Co-authored-by: Pedro Roque <padr@kth.se>
Co-authored-by: Hamish Willee <hamishwillee@gmail.com>
Co-authored-by: Ramon Roche <mrpollo@gmail.com>
* Add vitepress tree
* Update existing workflows so they dont trigger on changes in the docs path
* Add nojekyll, package.json, LICENCE etc
* Add crowdin docs upload/download scripts
* Add docs flaw checker workflows
* Used docs prefix for docs workflows
* Crowdin obvious fixes
* ci: docs move to self hosted runner
runs on a beefy server for faster builds
Signed-off-by: Ramon Roche <mrpollo@gmail.com>
* ci: don't run build action for docs or ci changes
Signed-off-by: Ramon Roche <mrpollo@gmail.com>
* ci: update runners
Signed-off-by: Ramon Roche <mrpollo@gmail.com>
* Add docs/en
* Add docs assets and scripts
* Fix up editlinks to point to PX4 sources
* Download just the translations that are supported
* Add translation sources for zh, uk, ko
* Update latest tranlsation and uorb graphs
* update vitepress to latest
---------
Signed-off-by: Ramon Roche <mrpollo@gmail.com>
Co-authored-by: Ramon Roche <mrpollo@gmail.com>