mirror of
https://github.com/PX4/PX4-Autopilot.git
synced 2026-11-22 14:19:57 +08:00
* feat(lib/sensor_calibration): add differential pressure calibration Airspeed sensors had a single global zero offset, so a second or third sensor could not be calibrated. Link the calibration to the sensor's device ID, following the existing barometer and magnetometer pattern, so the offsets stay bound to physical sensors rather than to uORB instance order. Signed-off-by: mahima-yoga <mahima@auterion.com> * feat(sensors): support multiple airspeed sensors The airspeed selector has always been able to validate and fail over between three airspeed sensors, but nothing ever produced more than one. Give each differential pressure sensor its own VehicleAirspeed item, which owns its calibration, validator and airspeed publication, following the VehicleIMU pattern. Airspeed carries the device ID of the sensor it came from, so consumers can tell the instances apart. The calibration routine now calibrates every connected sensor. Signed-off-by: mahima-yoga <mahima@auterion.com> * refactor(sensors)!: replace SENS_DPRES_OFF with per-sensor calibration SENS_DPRES_OFF applied one zero offset to whichever airspeed sensor happened to come first, which cannot work once there is more than one sensor. It is superseded by CAL_DPRESx_OFF. BREAKING CHANGE: SENS_DPRES_OFF is removed. Ground stations that read it to decide whether airspeed has been calibrated must check CAL_DPRES0_ID instead, matching how CAL_MAG0_ID, CAL_GYRO0_ID and CAL_ACC0_ID are already used. Signed-off-by: mahima-yoga <mahima@auterion.com> * feat(logger): log all airspeed and differential pressure instances The airspeed selector supports up to three airspeed sensors, but the logger only recorded one airspeed instance and two differential pressure instances. Signed-off-by: mahima-yoga <mahima@auterion.com> * fix(commander): stop airspeed calibration consuming a new slot each time Signed-off-by: mahima-yoga <mahima@auterion.com> * fix(sensors): give the analogue airspeed sensor a device ID Signed-off-by: mahima-yoga <mahima@auterion.com> * fix(boards): keep the airspeed conversion in ITCM Signed-off-by: mahima-yoga <mahima@auterion.com> * refactor(sensors): initialise airspeed instances outside the main loop Signed-off-by: mahima-yoga <mahima@auterion.com> * chore(sensors): correct the copyright year on the new CMakeLists Signed-off-by: mahima-yoga <mahima@auterion.com> * refactor(airspeed_selector): share the airspeed sensor count constant Signed-off-by: mahima-yoga <mahima@auterion.com> * docs(sensor_calibration): explain the unusable calibration slot guard Signed-off-by: mahima-yoga <mahima@auterion.com> * fix(sensors): keep SENS_DPRES_OFF as a mirror of the first sensor Signed-off-by: mahima-yoga <mahima@auterion.com> --------- Signed-off-by: mahima-yoga <mahima@auterion.com>
12 lines
733 B
Plaintext
12 lines
733 B
Plaintext
# Airspeed data from sensors
|
|
#
|
|
# This is published by airspeed sensor drivers, CAN airspeed sensors, simulators.
|
|
# It is subscribed by the airspeed selector module, which validates the data from multiple sensors and passes on a single estimation to the EKF, controllers and telemetry providers.
|
|
|
|
uint64 timestamp # [us] Time since system start
|
|
uint64 timestamp_sample # [us] Timestamp of the raw data
|
|
uint32 device_id # [-] Unique device ID of the sensor this measurement came from, 0 if unknown
|
|
float32 indicated_airspeed_m_s # [m/s] Indicated airspeed
|
|
float32 true_airspeed_m_s # [m/s] True airspeed
|
|
float32 confidence # [@range 0,1] Confidence value for this sensor
|