Files
PX4-Autopilot/docs/zh/modules/modules_driver_camera.md
T

57 lines
2.1 KiB
Markdown

# Modules Reference: Camera (Driver)
:::info
**This page is [auto-generated](https://github.com/PX4/PX4-Autopilot/blob/main/Tools/px4moduledoc/markdownout.py) from the source code** using the build command: `make module_documentation`.
Do not edit it directly; fix the module documentation in the [PX4-Autopilot](https://github.com/PX4/PX4-Autopilot) source instead.
:::
## camera_trigger
Source: [drivers/camera_trigger](https://github.com/PX4/PX4-Autopilot/tree/main/src/drivers/camera_trigger)
### 描述
Camera trigger driver.
This module triggers cameras that are connected to the flight-controller outputs,
or simple MAVLink cameras that implement the MAVLink trigger protocol.
The driver responds to the following MAVLink trigger commands being found in missions or received over MAVLink:
- `MAV_CMD_DO_TRIGGER_CONTROL`
- `MAV_CMD_DO_DIGICAM_CONTROL`
- `MAV_CMD_DO_SET_CAM_TRIGG_DIST`
- `MAV_CMD_OBLIQUE_SURVEY`
The commands cause the driver to trigger camera image capture based on time or distance.
Each time an image capture is triggered, the `CAMERA_TRIGGER` MAVLink message is emitted.
A "simple MAVLink camera" is one that supports the above command set.
When configured for this kind of camera, all the driver does is emit the `CAMERA_TRIGGER` MAVLink message as expected.
The incoming commands must be forwarded to the MAVLink camera, and are automatically emitted to MAVLink channels
when found in missions.
The driver is configured using [Camera Trigger parameters](../advanced_config/parameter_reference.md#camera-trigger).
In particular:
- `TRIG_INTERFACE` - How the camera is connected to flight controller (PWM, GPIO, Seagull, MAVLink)
- `TRIG_MODE` - Distance or time based triggering, with values set by `TRIG_DISTANCE` and `TRIG_INTERVAL`.
[Setup/usage information](../camera/index.md).
### Usage {#camera_trigger_usage}
```
camera_trigger <command> [arguments...]
Commands:
start
stop Stop driver
status Print driver status information
test Trigger one image (not logged or forwarded to GCS)
test_power Toggle power
```