Files
PX4-Autopilot/docs/ko/flight_controller/pixhawk4.md
T

227 lines
11 KiB
Markdown
Raw Blame History

This file contains ambiguous Unicode characters
This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.
# Holybro Pixhawk 4 (Discontinued)
<Badge type="tip" text="PX4 v1.7" /> <Badge type="info" text="Discontinued" px4_current="v1.18" year="2026"/>
:::warning
This flight controller has been [discontinued](../flight_controller/autopilot_discontinued.md) and is no longer commercially available.
It is still supported by PX4.
:::
:::warning
PX4 does not manufacture this (or any) autopilot.
Contact the [manufacturer](https://holybro.com/) for hardware support or compliance issues.
:::
[_Pixhawk 4_](https://holybro.com/products/pixhawk-4)<sup>&reg;</sup> is an advanced autopilot designed and made in collaboration with Holybro<sup>&reg;</sup> and the PX4 team.
PX4 v1.7 이상의 버전 실행에 최적화되어 있으며, 학계와 업계 개발자에게 적합합니다.
It is based on the [Pixhawk-project](https://pixhawk.org/) **FMUv5** open hardware design and runs PX4 on the [NuttX](https://nuttx.apache.org/) OS.
<img src="../../assets/flight_controller/pixhawk4/pixhawk4_hero_upright.jpg" width="200px" title="Pixhawk4 Upright Image" /> <img src="../../assets/flight_controller/pixhawk4/pixhawk4_logo_view.jpg" width="420px" title="Pixhawk4 Image" />
:::tip
This autopilot is [supported](../flight_controller/autopilot_pixhawk_standard.md) by the PX4 maintenance and test teams.
:::
## Specifications {#specifications}
### Processor {#processor}
- **Main FMU processor:** STM32F765 (32 Bit Arm® Cortex®-M7, 216 MHz, 2 MB flash, 512 KB RAM)
- **IO processor:** STM32F103 (32 Bit Arm® Cortex®-M3, 72 MHz, 64 KB SRAM), or STM32F100 (32 Bit Arm® Cortex®-M3, 24 MHz, 8 KB SRAM) on earlier boards
### Sensors {#sensors}
- **IMU:** ICM-20689 (SPI1), and BMI055 or ICM-20602 (SPI1)
- **Barometer:** MS5611 (SPI4)
- **Magnetometer:** IST8310 (I2C3)
- **GPS module (external):** u-blox Neo-M8N GPS/GLONASS receiver, with integrated IST8310 magnetometer
### Interfaces {#interfaces}
- **PWM outputs:** 16 (8 IO `MAIN`, 8 FMU `AUX`)
- **Capture inputs:** 3 dedicated PWM/capture inputs on FMU
- **Serial ports:** 4 (`GPS MODULE`, `TELEM1`, `TELEM2`, `UART & I2C B`)
- **I2C buses:** 4 (I2C3 internal; I2C1 on `GPS MODULE`, I2C2 on `UART & I2C B`, I2C4 on `I2C A`)
- **SPI buses:** 4
- **CAN buses:** up to 2, for dual CAN with serial ESC
- **USB:** Micro-USB
- **RC input:** dedicated input for CPPM, and dedicated input for Spektrum/DSM and S.BUS with analog/PWM RSSI input
- **S.BUS output:** dedicated S.BUS servo output
- **Parameter storage:** FRAM (SPI2)
- **SD card:** MicroSD slot
### Electrical Data {#electrical_data}
- **Input voltage:** 4.9 V to 5.5 V (`POWER1`, `POWER2`), 4.75 V to 5.25 V (`USB`)
- **Max input voltage:** 6 V (`POWER1`, `POWER2`, `USB`)
- **Servo rail input:** 0 V to 36 V
- **Power monitoring:** analog inputs for voltage and current of 2 batteries, up to 120 A
### Mechanical Data {#mechanical_data}
- **Dimensions:** 44 × 84 × 12 mm
- **Weight:** 31.2 g (plastic case), 48.5 g (aluminium case)
- **Operating temperature:** -40 °C to 85 °C
![Pixhawk 4 Dimensions](../../assets/flight_controller/pixhawk4/pixhawk4_dimensions.jpg)
Additional information can be found in the [Pixhawk 4 Technical Data Sheet](https://cdn.shopify.com/s/files/1/0604/5905/7341/files/Pixhawk4-DataSheet.pdf).
## Where to Buy {#store}
[Holybro](https://holybro.com/products/pixhawk-4) (No longer available).
## Pinouts {#pinouts}
![Pixhawk 4 connectors](../../assets/flight_controller/pixhawk4/pixhawk4-connectors.jpg)
:::warning
The `DSM/SBUS RC` and `PPM RC` ports are for RC receivers only.
이 포트들에는 전원이 공급됩니다. 서보를 전원공급장치나 배터리(또는 연결된 수신기)에 절대 연결하지 마십시오.
:::
Download _Pixhawk 4_ pinouts from [here](https://cdn.shopify.com/s/files/1/0604/5905/7341/files/Pixhawk4-Pinouts.pdf).
:::info
Connector pin assignments are left to right (i.e. Pin 1 is the left-most pin).
The exception is the [debug ports](#debug_port) (pin 1 is the right-most, as shown below).
:::
## Power {#power}
The `POWER1` and `POWER2` ports are 6-pin inputs for analog power modules, which supply the board and report battery voltage and current.
See [Pixhawk 4 Wiring Quick Start > Power](../assembly/quick_start_pixhawk4.md#power) for wiring, and [Battery and Power Module Setup](../config/battery.md) for configuration.
## Voltage Ratings {#voltage_ratings}
_Pixhawk 4_ can be triple-redundant on the power supply if three power sources are supplied.
The three power rails are: `POWER1`, `POWER2` and `USB`.
:::info
The output power rails `FMU PWM OUT` and `I/O PWM OUT` (0 V to 36 V) do not power the flight controller board (and are not powered by it).
The output rails must be [separately powered](../peripherals/pwm_escs_and_servo.md) if it needs to power servos or other hardware.
You must supply power to one of `POWER1`, `POWER2` or `USB`, or the board will be unpowered.
:::
**Normal Operation Maximum Ratings**
이러한 조건에서 전원은 아래의 순서대로 시스템에 전원을 공급하여야합니다.
1. `POWER1` and `POWER2` inputs (4.9 V to 5.5 V)
2. `USB` input (4.75 V to 5.25 V)
**Absolute Maximum Ratings**
아래의 조건에서 시스템은 전원을 사용하지 않지만(작동하지 않음), 그대로 유지됩니다.
1. `POWER1`, `POWER2` and `USB` inputs (operational range 4.1 V to 5.7 V, 0 V to 6 V undamaged)
2. Servo input: `VDD_SERVO` pin of `FMU PWM OUT` and `I/O PWM OUT` (0 V to 42 V undamaged)
## PWM Outputs {#pwm_outputs}
The Pixhawk 4 has 8 IO PWM outputs (`MAIN`) on the `I/O PWM OUT` port, and 8 FMU PWM outputs (`AUX`) on the `FMU PWM OUT` port.
[DShot](../peripherals/dshot.md) can be used on FMU outputs 1-4 (group1).
[Bidirectional DShot](../peripherals/dshot.md#bidirectional-dshot-telemetry) is not supported.
The 8 FMU outputs are in 3 groups:
- Outputs 1-4 in group1 (Timer1)
- Outputs 5-6 in group2 (Timer4)
- Outputs 7-8 in group3 (Timer12)
All outputs within the same group must use the same output protocol and rate.
The 3 capture inputs (`FMU_CAP1` to `FMU_CAP3`, Timer2) are on the `CAP & ADC IN` port, and appear in the [actuator configuration](../config/actuators.md) as `PWM Capture 1-3`.
They can also be used as extra PWM or OneShot outputs.
## SD Card (Optional) {#sd_card}
The Pixhawk 4 has a MicroSD card slot.
See [SD Cards](../getting_started/px4_basic_concepts.md#sd-cards-removable-memory) and [Pixhawk 4 Wiring Quick Start > SD Card](../assembly/quick_start_pixhawk4.md#sd_card).
## Serial Port Mapping {#serial_port_mapping}
| UART | 장치 | 포트 | Flow Control |
| ------ | ------------ | -------------------------------------------- | ------------ |
| USART1 | `/dev/ttyS0` | `GPS MODULE` (`GPS1`) | |
| USART2 | `/dev/ttyS1` | `TELEM1` | Yes |
| USART3 | `/dev/ttyS2` | `TELEM2` | Yes |
| UART4 | `/dev/ttyS3` | `UART & I2C B` (`TELEM4`) | |
| USART6 | `/dev/ttyS4` | `DSM/SBUS RC` | |
| UART7 | `/dev/ttyS5` | `FMU Debug` (Console) | |
| UART8 | `/dev/ttyS6` | PX4IO | |
## Assembly {#assembly}
The [Pixhawk 4 Wiring Quick Start](../assembly/quick_start_pixhawk4.md) provides instructions on how to assemble required/important peripherals including GPS, Power Management Board etc.
### Radio Control {#radio_control}
A remote control (RC) radio system is required if you want to manually control your vehicle (PX4 does not require a radio system for autonomous flight modes).
You will need to [select a compatible transmitter/receiver](../getting_started/rc_transmitter_receiver.md) and then bind them so that they communicate.
- Spektrum/DSM and S.BUS receivers connect to the `DSM/SBUS RC` port.
A Spektrum/DSM receiver takes 3.3 V from pin 4, and an S.BUS receiver takes 5 V from pin 1.
- PPM receivers connect to the `PPM RC` port.
PWM receivers, which have one wire per channel, need a [PPM encoder](../getting_started/rc_transmitter_receiver.md#connecting-receivers).
- [CRSF and GHST](../getting_started/rc_transmitter_receiver.md#compatible_receivers) receivers connect to a free `TELEM` port.
Enable the driver by [setting](../advanced_config/parameters.md) [RC_CRSF_PRT_CFG](../advanced_config/parameter_reference.md#RC_CRSF_PRT_CFG) or [RC_GHST_PRT_CFG](../advanced_config/parameter_reference.md#RC_GHST_PRT_CFG) to that port.
### GPS & Compass {#gps_compass}
Connect a GPS module to the 10-pin `GPS MODULE` port, which also carries its compass (I2C), safety switch, safety LED and buzzer.
The board also has an internal IST8310 compass.
A second GPS can be connected to the `UART & I2C B` port: set [GPS_2_CONFIG](../advanced_config/parameter_reference.md#GPS_2_CONFIG) to `TELEM/SERIAL 4`.
See [Pixhawk 4 Wiring Quick Start](../assembly/quick_start_pixhawk4.md) and [Mounting a GPS/Compass](../assembly/mount_gps_compass.md).
### Telemetry Radios (Optional) {#telemetry}
A [telemetry radio](../telemetry/index.md) can be connected to `TELEM1` without further configuration.
You can also connect one to any spare serial port, such as `TELEM2`, and [configure MAVLink](../peripherals/mavlink_peripherals.md) on that port.
### CAN {#can}
The `CAN1` and `CAN2` ports can be used for [DroneCAN](../dronecan/index.md) peripherals.
DroneCAN is not enabled by default: set [UAVCAN_ENABLE](../advanced_config/parameter_reference.md#UAVCAN_ENABLE) to enable it.
## Building Firmware {#building_firmware}
:::tip
Most users will not need to build this firmware!
It is pre-built and automatically installed by _QGroundControl_ when appropriate hardware is connected.
:::
To [build PX4](../dev_setup/building_px4.md) for this target:
```sh
make px4_fmu-v5_default
```
## Debug Port {#debug_port}
The [PX4 System Console](../debug/system_console.md) (UART7) and [SWD interface](../debug/swd_debug.md) run on the `FMU Debug` port, while the IO console and SWD interface can be accessed via the `I/O Debug` port.
In order to access these ports, the user must remove the _Pixhawk 4_ casing.
![Pixhawk 4 Debug Ports](../../assets/flight_controller/pixhawk4/pixhawk4_debug_port.jpg)
The pinout uses the standard [Pixhawk debug connector pinout](https://github.com/pixhawk/Pixhawk-Standards/blob/master/DS-009%20Pixhawk%20Connector%20Standard.pdf): both debug ports are [Pixhawk Debug Mini](../debug/swd_debug.md#pixhawk-debug-mini) ports.
배선 정보는 다음을 참조하십시오.
- [System Console > Pixhawk Debug Port](../debug/system_console.md#pixhawk_debug_port)
## 주변 장치
- [Digital Airspeed Sensor](https://store-drotek.com/793-digital-differential-airspeed-sensor-kit-.html)
- [Telemetry Radio Modules](../telemetry/index.md)
- [Rangefinders/Distance sensors](../sensor/rangefinders.md)
## Further Information {#further_information}
- [Pixhawk 4 Technical Data Sheet](https://cdn.shopify.com/s/files/1/0604/5905/7341/files/Pixhawk4-DataSheet.pdf) (Holybro)
- [FMUv5 reference design pinout](https://docs.google.com/spreadsheets/d/1-n0__BYDedQrc_2NHqBenG1DNepAgnHpSGglke-QQwY/edit#gid=912976165).
- [Pixhawk 4 Wiring QuickStart](../assembly/quick_start_pixhawk4.md)
- [Pixhawk 4 Pinouts](https://cdn.shopify.com/s/files/1/0604/5905/7341/files/Pixhawk4-Pinouts.pdf) (Holybro)
- [Pixhawk 4 Quick Start Guide](https://cdn.shopify.com/s/files/1/0604/5905/7341/files/Pixhawk4-quickstartguide.pdf) (Holybro)