Files
PX4-Autopilot/docs/en/modules/modules_estimator.md
T
Alex E 59fa7a4a7d docs(modules): add auto-generated disclaimer to every module reference page (#29673)
Only modules_main.md told readers that the module reference is generated
from source. The per-category pages (modules_driver.md, modules_system.md,
...) and the per-subcategory pages (modules_driver_imu.md, ...) had no such
note, so contributors kept fixing typos directly in docs/en/modules/ and
the next metadata sync silently reverted them (see #29614).

Emit a `::: info` block right under the H1 of every category and
subcategory page. The wording follows the existing disclaimers on the
airframe reference and the uORB message index: it links to the generator
script and names the `make module_documentation` target.

docs/en/modules/*.md are regenerated with the updated generator and run
through Prettier, mirroring what the docs-orchestrator metadata sync does
on main, so the diff is only the new note.

Fixes #29624

Assisted-by: Claude:claude-fable-5-1

Signed-off-by: Alex E <aelejandro9@gmail.com>
2026-11-10 08:51:33 +11:00

121 lines
3.1 KiB
Markdown

# Modules Reference: Estimator
::: info
**This page is [auto-generated](https://github.com/PX4/PX4-Autopilot/blob/main/Tools/px4moduledoc/markdownout.py) from the source code** using the build command: `make module_documentation`.
Do not edit it directly; fix the module documentation in the [PX4-Autopilot](https://github.com/PX4/PX4-Autopilot) source instead.
:::
## AttitudeEstimatorQ
Source: [modules/attitude_estimator_q](https://github.com/PX4/PX4-Autopilot/tree/main/src/modules/attitude_estimator_q)
### Description
Attitude estimator q.
### Usage {#AttitudeEstimatorQ_usage}
```
AttitudeEstimatorQ <command> [arguments...]
Commands:
start
stop
status print status info
```
## airspeed_estimator
Source: [modules/airspeed_selector](https://github.com/PX4/PX4-Autopilot/tree/main/src/modules/airspeed_selector)
### Description
This module provides a single airspeed_validated topic, containing indicated (IAS),
calibrated (CAS), true airspeed (TAS) and the information if the estimation currently
is invalid and if based sensor readings or on groundspeed minus windspeed.
Supporting the input of multiple "raw" airspeed inputs, this module automatically switches
to a valid sensor in case of failure detection. For failure detection as well as for
the estimation of a scale factor from IAS to CAS, it runs several wind estimators
and also publishes those.
### Usage {#airspeed_estimator_usage}
```
airspeed_estimator <command> [arguments...]
Commands:
start
stop
status print status info
```
## ekf2
Source: [modules/ekf2](https://github.com/PX4/PX4-Autopilot/tree/main/src/modules/ekf2)
### Description
Attitude and position estimator using an Extended Kalman Filter. It is used for Multirotors and Fixed-Wing.
The documentation can be found on the [ECL/EKF Overview & Tuning](../advanced_config/tuning_the_ecl_ekf.md) page.
ekf2 can be started in replay mode (`-r`): in this mode, it does not access the system time, but only uses the
timestamps from the sensor topics.
### Usage {#ekf2_usage}
```
ekf2 <command> [arguments...]
Commands:
start
[-r] Enable replay mode
stop
status print status info
[-v] verbose (print all states and full covariance matrix)
select_instance Request switch to new estimator instance
<instance> Specify desired estimator instance
```
## local_position_estimator
Source: [modules/local_position_estimator](https://github.com/PX4/PX4-Autopilot/tree/main/src/modules/local_position_estimator)
### Description
Attitude and position estimator using an Extended Kalman Filter.
### Usage {#local_position_estimator_usage}
```
local_position_estimator <command> [arguments...]
Commands:
start
stop
status print status info
```
## mc_hover_thrust_estimator
Source: [modules/mc_hover_thrust_estimator](https://github.com/PX4/PX4-Autopilot/tree/main/src/modules/mc_hover_thrust_estimator)
### Description
### Usage {#mc_hover_thrust_estimator_usage}
```
mc_hover_thrust_estimator <command> [arguments...]
Commands:
start
stop
status print status info
```