Files
PX4-Autopilot/docs/en/modules/modules_driver_transponder.md
T
Alex E 59fa7a4a7d docs(modules): add auto-generated disclaimer to every module reference page (#29673)
Only modules_main.md told readers that the module reference is generated
from source. The per-category pages (modules_driver.md, modules_system.md,
...) and the per-subcategory pages (modules_driver_imu.md, ...) had no such
note, so contributors kept fixing typos directly in docs/en/modules/ and
the next metadata sync silently reverted them (see #29614).

Emit a `::: info` block right under the H1 of every category and
subcategory page. The wording follows the existing disclaimers on the
airframe reference and the uORB message index: it links to the generator
script and names the `make module_documentation` target.

docs/en/modules/*.md are regenerated with the updated generator and run
through Prettier, mirroring what the docs-orchestrator metadata sync does
on main, so the diff is only the new note.

Fixes #29624

Assisted-by: Claude:claude-fable-5-1

Signed-off-by: Alex E <aelejandro9@gmail.com>
2026-11-10 08:51:33 +11:00

49 lines
1.5 KiB
Markdown

# Modules Reference: Transponder (Driver)
::: info
**This page is [auto-generated](https://github.com/PX4/PX4-Autopilot/blob/main/Tools/px4moduledoc/markdownout.py) from the source code** using the build command: `make module_documentation`.
Do not edit it directly; fix the module documentation in the [PX4-Autopilot](https://github.com/PX4/PX4-Autopilot) source instead.
:::
## sagetech_mxs
Source: [drivers/transponder/sagetech_mxs](https://github.com/PX4/PX4-Autopilot/tree/main/src/drivers/transponder/sagetech_mxs)
### Description
This driver integrates the Sagetech MXS Certified Transponder to send and receive ADSB messages and traffic.
### Examples
Attempt to start driver on a specified serial device.
$ sagetech_mxs start -d /dev/ttyS1
Stop driver
$ sagetech_mxs stop
Set Flight ID (8 char max)
$ sagetech_mxs flight_id MXS12345
Set MXS Operating Mode
$ sagetech_mxs opmode off/on/stby/alt
$ sagetech_mxs opmode 0/1/2/3
Set the Squawk Code
$ sagetech_mxs squawk 1200
### Usage {#sagetech_mxs_usage}
```
sagetech_mxs <command> [arguments...]
Commands:
start Start driver
-d <val> Serial device
stop Stop driver
flightid Set Flight ID (8 char max)
ident Set the IDENT bit in ADSB-Out messages
opmode Set the MXS operating mode. ('off', 'on', 'stby', 'alt', or
numerical [0-3])
squawk Set the Squawk Code. [0-7777] Octal (no digit larger than 7)
```