Files
PX4-Autopilot/docs/uk/msg_docs/SensorGnssSpectrum.md
T

63 lines
5.5 KiB
Markdown

---
pageClass: is-wide-page
---
# SensorGnssSpectrum (UORB message)
GNSS spectrum analysis.
Reports a basic RF spectrum analysis for a GNSS receiver, decoded from the u-blox UBX-MON-SPAN
message (enabled via the GPS_UBX_SPECTRUM parameter).
Published by the `gps` driver (UBX protocol only), once per RF block, via the block-specific topics below.
The center frequency of bin i is: f(i) = center_frequency + spectrum_span \* (i - 127) / 256
**TOPICS:** sensor_gnss_spectrum_block0 sensor_gnss_spectrum_block1 sensor_gnss_spectrum_block2
## Fields
| Назва | Тип | Unit [Frame] | Range/Enum | Опис |
| ----------------------------------------------------------------------------------------------------------------- | ------------ | ---------------------------------------------------------------- | ---------- | ------------------------------------------------------------------------------------------------------------------------------------------------- |
| <a id="fld_timestamp"></a>timestamp | `uint64` | us | | Time since system start |
| <a id="fld_timestamp_sample"></a>timestamp_sample | `uint64` | us | | Timestamp of the raw data |
| <a id="fld_device_id"></a>device_id | `uint32` | | | Unique device ID for the sensor that does not change between power cycles |
| <a id="fld_block_id"></a>block_id | `uint8` | | | Only used for multi-topic publishing. Use center_frequency to determine which RF band it is. |
| <a id="fld_spectrum"></a>spectrum | `uint8[256]` | (2^-2)dB | | Spectrum magnitude per bin (number of points = spectrum_span / resolution) |
| <a id="fld_spectrum_span"></a>spectrum_span | `uint32` | Hz | | Frequency span covered by the spectrum |
| <a id="fld_resolution"></a>resolution | `uint32` | Hz | | Frequency resolution of the spectrum (bin width) |
| <a id="fld_center_frequency"></a>center_frequency | `uint32` | Hz | | Center frequency of the spectrum span |
| <a id="fld_programmable_gain_amplifier"></a>programmable_gain_amplifier | `uint8` | dB | | Programmable gain amplifier setting |
## Source Message
[Source file (GitHub)](https://github.com/PX4/PX4-Autopilot/blob/main/msg/SensorGnssSpectrum.msg)
:::details
Click here to see original file
```c
# GNSS spectrum analysis
#
# Reports a basic RF spectrum analysis for a GNSS receiver, decoded from the u-blox UBX-MON-SPAN
# message (enabled via the GPS_UBX_SPECTRUM parameter).
# Published by the `gps` driver (UBX protocol only), once per RF block, via the block-specific topics below.
# The center frequency of bin i is: f(i) = center_frequency + spectrum_span * (i - 127) / 256
uint64 timestamp # [us] Time since system start
uint64 timestamp_sample # [us] Timestamp of the raw data
uint32 device_id # Unique device ID for the sensor that does not change between power cycles
uint8 block_id # [-] Only used for multi-topic publishing. Use center_frequency to determine which RF band it is.
uint8[256] spectrum # [(2^-2)dB] Spectrum magnitude per bin (number of points = spectrum_span / resolution)
uint32 spectrum_span # [Hz] Frequency span covered by the spectrum
uint32 resolution # [Hz] Frequency resolution of the spectrum (bin width)
uint32 center_frequency # [Hz] Center frequency of the spectrum span
uint8 programmable_gain_amplifier # [dB] Programmable gain amplifier setting
# One topic per RF block ID
# TOPICS sensor_gnss_spectrum_block0 sensor_gnss_spectrum_block1 sensor_gnss_spectrum_block2
```
:::