Files
PX4-Autopilot/docs/uk/modules/modules_simulation.md
T

63 lines
2.6 KiB
Markdown

# Посилання на модулі: Симуляція
:::info
**This page is [auto-generated](https://github.com/PX4/PX4-Autopilot/blob/main/Tools/px4moduledoc/markdownout.py) from the source code** using the build command: `make module_documentation`.
Do not edit it directly; fix the module documentation in the [PX4-Autopilot](https://github.com/PX4/PX4-Autopilot) source instead.
:::
## simulator_sih
Source: [modules/simulation/simulator_sih](https://github.com/PX4/PX4-Autopilot/tree/main/src/modules/simulation/simulator_sih)
### Опис
Цей модуль надає симулятор для квадрокоптерів та фіксованих крил, що повністю працює всередині апаратного автопілота.
Цей симулятор підписується на "actuator_outputs", які є сигналами ШІМ, наданими модулем розподілу керування.
Цей симулятор публікує сигнали датчиків, спотворені реалістичним шумом, щоб включити оцінювання стану в петлю.
### Імплементація
Симулятор реалізує рівняння руху за допомогою матричної алгебри.Використовується кватерніонне представлення для орієнтації.Для інтегрування використовується пряма схема Ейлера.Більшість змінних оголошуються глобальними в файлі .hpp, щоб уникнути переповнення стеку.
### Приклади
Pose the vehicle on the ground for accel and mag calibration (SITL only), sides named as the calibration names them.
With `rotate` it turns about the vertical with a tilt swing, as the mag calibration asks for:
```
simulator_sih orient left rotate
```
Each side in turn: 10 s still, then 10 s rotating, then level. This completes either calibration.
```
simulator_sih orient all
```
Level the vehicle and resume the flight dynamics:
```
simulator_sih orient off
```
### Usage {#simulator_sih_usage}
```
simulator_sih <command> [arguments...]
Commands:
start
[-t <val>] Terrain elevation GeoTIFF (DEM), SITL only
values: <file>
orient Pose the vehicle on the ground for calibration
down|up|front|back|left|right|all|off Side facing down, every side in turn,
or level
[rotate] Rotate about the vertical
stop
status print status info
```