Files
PX4-Autopilot/docs/en/dev_setup/dev_env_mac.md
T
Jacob Dahl fbfc1386ee ci(macos): install from pinned Homebrew commits
The job ran brew update and then installed whatever Homebrew was publishing, except Gazebo, which stayed on one commit. Those were built against different protobufs, so a release upstream failed the build with no commit here. Check the package repos out at commits recorded in the tree and do not update them. Run on macos-15 only, so the OS label cannot move either.

Assisted-by: Grok:grok-4.7
Signed-off-by: Jacob Dahl <dahl.jakejacob@gmail.com>
2026-09-21 16:55:31 -07:00

136 lines
4.9 KiB
Markdown

# macOS Development Environment
The following instructions set up a PX4 development environment on macOS.
This environment can be used to build PX4 for:
- Pixhawk and other NuttX-based hardware
- [Gazebo Simulation](../sim_gazebo_gz/index.md) (Gazebo Harmonic)
It works on both Intel and Apple Silicon Macs.
PX4 CI exercises this setup on Apple Silicon runners only; Intel is not covered by CI.
::: tip
This setup is supported by the PX4 dev team.
To build for [other targets](../dev_setup/dev_env.md#supported-targets) you will need to use a [different OS](../dev_setup/dev_env.md#supported-targets) or an [unsupported development environment](../advanced/community_supported_dev_env.md).
:::
## Development Environment Setup
### Prerequisites
1. **Install Xcode Command Line Tools**, which provide `git`, `make`, and the Apple `clang` compiler:
```sh
xcode-select --install
```
2. **Install Homebrew** by following the [installation instructions](https://brew.sh).
The setup script below also installs Homebrew if it is missing.
3. **Increase the open-file limit.** The PX4 build opens many files simultaneously and the macOS default limit (256) is too low. You may see `"LD: too many open files"` errors without this.
Add the following line to your shell startup file so it applies to every new terminal session.
macOS defaults to **zsh** since Catalina, so add it to `~/.zshrc` (use `~/.bashrc` if you use bash):
```sh
echo "ulimit -S -n 2048" >> ~/.zshrc
```
Then **open a new terminal** (or run `source ~/.zshrc`) for the change to take effect.
### Install Development Tools
1. **Download PX4 Source Code:**
```sh
git clone https://github.com/PX4/PX4-Autopilot.git
cd PX4-Autopilot
git submodule update --init --recursive --force
```
2. **Install development environment libraries** from the [macos.sh](https://github.com/PX4/PX4-Autopilot/blob/main/Tools/setup/macos.sh) helper script:
```sh
./Tools/setup/macos.sh --sim-tools
```
::: info
The setup script creates a Python virtual environment at `.venv` in the repo root and installs all Python dependencies into it. This keeps PX4's Python requirements isolated from your system Python and avoids conflicts with Homebrew's externally-managed Python.
Activate it before building:
```sh
source .venv/bin/activate
```
You'll need to re-run this command in each new terminal session. To activate it automatically when you `cd` into the repo, consider a tool like [direnv](https://direnv.net/) or add the activation to your `~/.zshrc`.
:::
The script installs the NuttX cross-compiler and build tools, the Python dependencies (into the `.venv` described above), and with `--sim-tools` the Gazebo simulation stack.
It is the source of truth for what gets installed; read [macos.sh](https://github.com/PX4/PX4-Autopilot/blob/main/Tools/setup/macos.sh) for the details.
::: info
Omit `--sim-tools` if you only need to build for NuttX hardware and don't need simulation.
All Gazebo dependencies are optional at build time, so `make px4_sitl` still works without them.
Use `--reinstall` to force reinstallation of the Homebrew formulas (useful if something is broken).
:::
::: info
The script installs from third-party Homebrew taps and marks them as trusted (`brew trust`) on Homebrew 6.0 and later, which refuses to load formulae from untrusted taps.
With `--sim-tools` it will prompt for your password, since the XQuartz installer and the JDK link into `/Library/Java/JavaVirtualMachines` need `sudo`.
:::
### Gazebo Simulation
The `--sim-tools` flag installs Gazebo and the libraries PX4's simulation modules build against.
If you skipped `--sim-tools` during initial setup and want to add simulation later, re-run the setup script with the flag (it is safe to run repeatedly):
```sh
./Tools/setup/macos.sh --sim-tools
```
::: info
The script also installs **XQuartz**.
macOS may require you to log out and back in after XQuartz is first installed.
:::
### Verify Installation
After installation, verify the key tools are available:
```sh
# NuttX cross-compiler
arm-none-eabi-gcc --version
# Build tools
cmake --version
ninja --version
# Gazebo (if --sim-tools was used)
gz sim --versions
```
As a quick smoke test, build and run a simulation target:
```sh
make px4_sitl gz_x500
```
If everything is set up correctly, this will build PX4 SITL and launch a Gazebo simulation with the x500 quadcopter.
## Next Steps
Once you have finished setting up the command-line toolchain:
- Install [VSCode](../dev_setup/vscode.md) (if you prefer using an IDE to the command line).
- Install the [QGroundControl Daily Build](../dev_setup/qgc_daily_build.md)
::: tip
The _daily build_ includes development tools that are hidden in release builds.
It may also provide access to new PX4 features that are not yet supported in release builds.
:::
- Continue to the [build instructions](../dev_setup/building_px4.md).