mirror of
https://github.com/PX4/PX4-Autopilot.git
synced 2026-11-22 14:19:57 +08:00
61 lines
5.6 KiB
Markdown
61 lines
5.6 KiB
Markdown
---
|
|
pageClass: is-wide-page
|
|
---
|
|
|
|
# SurfaceVehiclePositionSetpoint (UORB message)
|
|
|
|
Surface Vehicle Position Setpoint.
|
|
|
|
Position setpoint consumed by the rover position controllers (AckermannPosControl,
|
|
DifferentialPosControl, MecanumPosControl), which turn it into surface_vehicle_speed_setpoint
|
|
and surface_vehicle_attitude_setpoint.
|
|
Published by the manual (position), auto and offboard drive modes of rover_ackermann,
|
|
rover_differential and rover_mecanum, and can be sent from ROS 2 over uXRCE-DDS
|
|
(/fmu/in/surface_vehicle_position_setpoint).
|
|
The rover follows the desired track from start_ned to target_ned. To control the course over ground
|
|
instead, publish surface_vehicle_course_setpoint; the position controller follows whichever
|
|
of the two was published most recently.
|
|
|
|
**TOPICS:** surface_vehicle_position_setpoint
|
|
|
|
## Fields
|
|
|
|
| 명칭 | 형식 | Unit [Frame] | Range/Enum | 설명 |
|
|
| ------------------------------------------------------------------ | ------------ | ---------------------------------------------------------------- | -------------------------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
|
|
| <a id="fld_timestamp"></a>timestamp | `uint64` | us | | Time since system start |
|
|
| <a id="fld_target_ned"></a>target_ned | `float32[2]` | m [NED] | [-inf : inf] | Target position (Invalid: NaN No target; the position controller stays idle) |
|
|
| <a id="fld_start_ned"></a>start_ned | `float32[2]` | m [NED] | [-inf : inf] | Start position of the desired track towards target_ned (Invalid: NaN Defaults to the vehicle position when the setpoint is received) |
|
|
| <a id="fld_cruising_speed"></a>cruising_speed | `float32` | m/s | [-inf : inf] | Cruising speed; a negative value drives the rover in reverse (rear first) towards target_ned (Invalid: NaN Defaults to maximum speed) |
|
|
| <a id="fld_arrival_speed"></a>arrival_speed | `float32` | m/s | [0 : inf] | Speed magnitude to arrive at the target with, independent of the direction of travel (Invalid: NaN Defaults to 0) |
|
|
| <a id="fld_yaw"></a>yaw | `float32` | rad [NED] | [-pi : pi] | Currently unused. Only for vehicles that can move sideways (e.g. mecanum): vehicle yaw during travel. (Invalid: NaN Not considered) |
|
|
|
|
## Source Message
|
|
|
|
[Source file (GitHub)](https://github.com/PX4/PX4-Autopilot/blob/main/msg/SurfaceVehiclePositionSetpoint.msg)
|
|
|
|
:::details
|
|
Click here to see original file
|
|
|
|
```c
|
|
# Surface Vehicle Position Setpoint
|
|
#
|
|
# Position setpoint consumed by the rover position controllers (AckermannPosControl,
|
|
# DifferentialPosControl, MecanumPosControl), which turn it into surface_vehicle_speed_setpoint
|
|
# and surface_vehicle_attitude_setpoint.
|
|
# Published by the manual (position), auto and offboard drive modes of rover_ackermann,
|
|
# rover_differential and rover_mecanum, and can be sent from ROS 2 over uXRCE-DDS
|
|
# (/fmu/in/surface_vehicle_position_setpoint).
|
|
# The rover follows the desired track from start_ned to target_ned. To control the course over ground
|
|
# instead, publish surface_vehicle_course_setpoint; the position controller follows whichever
|
|
# of the two was published most recently.
|
|
|
|
uint64 timestamp # [us] Time since system start
|
|
float32[2] target_ned # [m] [@range -inf, inf] [@frame NED] [@invalid NaN No target; the position controller stays idle] Target position
|
|
float32[2] start_ned # [m] [@range -inf, inf] [@frame NED] [@invalid NaN Defaults to the vehicle position when the setpoint is received] Start position of the desired track towards target_ned
|
|
float32 cruising_speed # [m/s] [@range -inf, inf] [@invalid NaN Defaults to maximum speed] Cruising speed; a negative value drives the rover in reverse (rear first) towards target_ned
|
|
float32 arrival_speed # [m/s] [@range 0, inf] [@invalid NaN Defaults to 0] Speed magnitude to arrive at the target with, independent of the direction of travel
|
|
float32 yaw # [rad] [@range -pi, pi] [@frame NED] [@invalid NaN Not considered] Currently unused. Only for vehicles that can move sideways (e.g. mecanum): vehicle yaw during travel.
|
|
```
|
|
|
|
:::
|