Files
PX4-Autopilot/docs/en/modules/modules_driver_airspeed_sensor.md
Alex E 59fa7a4a7d docs(modules): add auto-generated disclaimer to every module reference page (#29673)
Only modules_main.md told readers that the module reference is generated
from source. The per-category pages (modules_driver.md, modules_system.md,
...) and the per-subcategory pages (modules_driver_imu.md, ...) had no such
note, so contributors kept fixing typos directly in docs/en/modules/ and
the next metadata sync silently reverted them (see #29614).

Emit a `::: info` block right under the H1 of every category and
subcategory page. The wording follows the existing disclaimers on the
airframe reference and the uORB message index: it links to the generator
script and names the `make module_documentation` target.

docs/en/modules/*.md are regenerated with the updated generator and run
through Prettier, mirroring what the docs-orchestrator metadata sync does
on main, so the diff is only the new note.

Fixes #29624

Assisted-by: Claude:claude-fable-5-1

Signed-off-by: Alex E <aelejandro9@gmail.com>
2026-11-10 08:51:33 +11:00

7.1 KiB

Modules Reference: Airspeed Sensor (Driver)

::: info This page is auto-generated from the source code using the build command: make module_documentation. Do not edit it directly; fix the module documentation in the PX4-Autopilot source instead. :::

asp5033

Source: drivers/differential_pressure/asp5033

Description

Driver to enable an external [ASP5033] (https://www.qio-tek.com/index.php/product/qiotek-asp5033-dronecan-airspeed-and-compass-module/) TE connected via I2C. This is not included by default in firmware. It can be included with terminal command: "make <your_board> boardconfig" or in default.px4board with adding the line: "CONFIG_DRIVERS_DIFFERENTIAL_PRESSURE_ASP5033=y" It can be enabled with the "SENS_EN_ASP5033" parameter set to 1.

Usage

asp5033 <command> [arguments...]
 Commands:
   start
     [-I]        Internal I2C bus(es) (onboard sensors; shared bus only if -b is
                 given)
     [-X]        External I2C bus(es) (connector sensors, including shared
                 buses)
     [-b <val>]  board-specific bus (default=all) (external SPI: n-th bus
                 (default=1))
     [-f <val>]  bus frequency in kHz
     [-q]        quiet startup (no message if no device found)
     [-a <val>]  I2C address
                 default: 109

   stop

   status        print status info

auav

Source: drivers/differential_pressure/auav

Usage

auav <command> [arguments...]
 Commands:
   start
     [-D]        Differential pressure sensing
     [-A]        Absolute pressure sensing
     [-I]        Internal I2C bus(es) (onboard sensors; shared bus only if -b is
                 given)
     [-X]        External I2C bus(es) (connector sensors, including shared
                 buses)
     [-b <val>]  board-specific bus (default=all) (external SPI: n-th bus
                 (default=1))
     [-f <val>]  bus frequency in kHz
     [-q]        quiet startup (no message if no device found)
     [-a <val>]  I2C address
                 default: 38

   stop

   status        print status info

dlvr

Source: drivers/differential_pressure/dlvr

Description

I2C driver for Amphenol All Sensors Digital Low Voltage R-Series (DLVR) pressure sensors (continuous-sampling variants only).

The driver is enabled for specific sensor-variants using the parameter "SENS_EN_DLVR".

Usage

dlvr <command> [arguments...]
 Commands:
   start
     [-I]        Internal I2C bus(es) (onboard sensors; shared bus only if -b is
                 given)
     [-X]        External I2C bus(es) (connector sensors, including shared
                 buses)
     [-b <val>]  board-specific bus (default=all) (external SPI: n-th bus
                 (default=1))
     [-f <val>]  bus frequency in kHz
     [-q]        quiet startup (no message if no device found)
     [-a <val>]  I2C address
                 default: 40

   stop

   status        print status info

ets_airspeed

Source: drivers/differential_pressure/ets

Usage

ets_airspeed <command> [arguments...]
 Commands:
   start
     [-I]        Internal I2C bus(es) (onboard sensors; shared bus only if -b is
                 given)
     [-X]        External I2C bus(es) (connector sensors, including shared
                 buses)
     [-b <val>]  board-specific bus (default=all) (external SPI: n-th bus
                 (default=1))
     [-f <val>]  bus frequency in kHz
     [-q]        quiet startup (no message if no device found)
     [-a <val>]  I2C address
                 default: 117

   stop

   status        print status info

ms4515

Source: drivers/differential_pressure/ms4515

Usage

ms4515 <command> [arguments...]
 Commands:
   start
     [-I]        Internal I2C bus(es) (onboard sensors; shared bus only if -b is
                 given)
     [-X]        External I2C bus(es) (connector sensors, including shared
                 buses)
     [-b <val>]  board-specific bus (default=all) (external SPI: n-th bus
                 (default=1))
     [-f <val>]  bus frequency in kHz
     [-q]        quiet startup (no message if no device found)
     [-a <val>]  I2C address
                 default: 70

   stop

   status        print status info

ms4525do

Source: drivers/differential_pressure/ms4525do

Usage

ms4525do <command> [arguments...]
 Commands:
   start
     [-I]        Internal I2C bus(es) (onboard sensors; shared bus only if -b is
                 given)
     [-X]        External I2C bus(es) (connector sensors, including shared
                 buses)
     [-b <val>]  board-specific bus (default=all) (external SPI: n-th bus
                 (default=1))
     [-f <val>]  bus frequency in kHz
     [-q]        quiet startup (no message if no device found)
     [-a <val>]  I2C address
                 default: 40

   stop

   status        print status info

ms5525dso

Source: drivers/differential_pressure/ms5525dso

Usage

ms5525dso <command> [arguments...]
 Commands:
   start
     [-I]        Internal I2C bus(es) (onboard sensors; shared bus only if -b is
                 given)
     [-X]        External I2C bus(es) (connector sensors, including shared
                 buses)
     [-b <val>]  board-specific bus (default=all) (external SPI: n-th bus
                 (default=1))
     [-f <val>]  bus frequency in kHz
     [-q]        quiet startup (no message if no device found)
     [-a <val>]  I2C address
                 default: 118

   stop

   status        print status info

sdp3x

Source: drivers/differential_pressure/sdp3x

Usage

sdp3x <command> [arguments...]
 Commands:
   start
     [-I]        Internal I2C bus(es) (onboard sensors; shared bus only if -b is
                 given)
     [-X]        External I2C bus(es) (connector sensors, including shared
                 buses)
     [-b <val>]  board-specific bus (default=all) (external SPI: n-th bus
                 (default=1))
     [-f <val>]  bus frequency in kHz
     [-q]        quiet startup (no message if no device found)
     [-a <val>]  I2C address
                 default: 33
     [-k]        if initialization (probing) fails, keep retrying periodically

   stop

   status        print status info