Commit Graph
23 Commits
Author SHA1 Message Date
Julian Oes d17b623b19 feat(msg): widen system IDs to 32 bit
MAVLink 2 now supports 32-bit system IDs. The uORB fields carrying a
MAVLink system ID need to hold them, so VehicleStatus (v5),
VehicleCommand (v1), VehicleCommandAck (v2) and ManualControlSetpoint
(v2) get uint32 system ID fields, with translations to the previous
versions. Older versions get IDs above 255 clamped to 255.

Assisted-by: Claude:claude-opus-5-5
Signed-off-by: Julian Oes <julian@oes.ch>
2026-10-23 22:48:49 +02:00
Mahima Yogaandfedericomagri12 02dbc12355 feat(navigator): continue in Guided Course after the fixed-wing takeoff (#28930)
* feat(navigator): hold a commanded course after the fixed-wing takeoff

A finite yaw in MAV_CMD_NAV_TAKEOFF (param4) ends the climbout in a
course hold at the takeoff altitude instead of a loiter, and the vehicle
stays in Takeoff mode. NaN keeps the loiter.

* feat(navigator): continue in Guided Course after a course takeoff

* fix(navigator): ignore lat/lon during a course-based takeoff

* fix(navigator): add guard for 0 heading takeoff

---------

Co-authored-by: federicomagri12 <federico.magri@auterion.com>
2026-10-23 12:00:48 +02:00
ac97d5263a feat(commander)!: Replace CBRK_IO_SAFETY with COM_SAFETY_MODE for more options (#28744)
* feat(commander): only report safety button as available when it is available and configured to be used via COM_PREARM_MODE

* feat(commander): add a new option to COM_PREARM_MODE to explicitly and exclusively allow prearming via VEHICLE_CMD_DO_SET_SAFETY_SWITCH_STATE

* feat(commander): explicit dedicated safety-button-only and mavlink-only prearm modes

* fix(commander): also accept VEHICLE_CMD_DO_SET_SAFETY_SWITCH_STATE on Always and Disarmed pre-arm profiles to match documentation

* docs(prearm): update docs with new prearm mode behaviour

* fix(commander): fix syntax for bool

* docs(prearm): revert last param table, as COM_FORCE_SAFETY is already mentioned in a table above.

* docs(prearm): fix MAVLink spelling, grammar and parameter table

Make the pre-arm docs consistent with the COM_PREARM_MODE parameter and
the docs style guide: MAVLink is spelled consistently (page and option
labels), selectable option names are shown in code style, the parameter
table lists all five COM_PREARM_MODE options with the correct default,
and sentences are fixed and put one per line.

Question for the author: the COM_PREARM_MODE option labels say "Safety
button", while the docs say "safety switch". Are these synonyms? If so,
which term should we use in both places? If not, what is the difference?

Assisted-by: Claude:claude-opus-5-5
Signed-off-by: Hamish Willee <hamishwillee@gmail.com>

* fix(commander): clean up _button_disabled logic: button still needs to be enabled in Disabled and Always prearmed modes to switch safety off.

* docs(prearm): adjust COM_PREARM_MODE description and clarify/fix/improve prearm docs

* chore(VehicleCommand.msg): improved comments

* chore(msg): v0->v1 translation for VehicleCommand.msg

* Revert "chore(msg): v0->v1 translation for VehicleCommand.msg"

This reverts commit 50ea14fc76310ba7b53ebcd1c6ee8cf4e1c0776b.

* feat(commander): deny VEHICLE_CMD_DO_SET_SAFETY_SWITCH_STATE when not accepted

* feat(commander): COM_SAFETY_MODE replaces CBRK_IO_SAFETY

* docs(prearm): update docs with new COM_SAFETY_MODE behaviour

* docs(prearm): minor cleanup

* fix(commander): migrate CBRK_IO_SAFETY and correct safety ACKs

A stored CBRK_IO_SAFETY=0 was dropped on import, so upgraded vehicles booted with COM_SAFETY_MODE=0 and safety off. The CAN GPS nodes have no commander, so setting COM_SAFETY_MODE there only logged an error at boot. A SAFETY_SAFE command in mode 0 and ESC calibration with safety on were ACKed ACCEPTED while doing nothing.

Assisted-by: Claude:claude-opus-5-5

---------

Signed-off-by: Hamish Willee <hamishwillee@gmail.com>
Co-authored-by: Hamish Willee <hamishwillee@gmail.com>
Co-authored-by: Jacob Dahl <dahl.jakejacob@gmail.com>
2026-10-06 17:35:07 -06:00
Thomas Stauber f629d451de fix(VehicleCommand.msg): rename and align enum for DO_SET_SAFETY_SWITCH_STATE to match MAVLink standard (#28948) 2026-10-02 16:50:39 -06:00
Claudio Chies e87918ea2b fix(failure_injection): keep failure names in sync with FailureInjection.msg (#28376)
unitName()/typeName() lacked the FAILURE_UNIT_DATALINK_*/FAILURE_UNIT_BUS_* units, so `failure can off` was announced as unit "unknown". FailureInjection.msg and VehicleCommand.msg also disagreed on FAILURE_TYPE_DRIFT (MAVLink FAILURE_TYPE 8).

Name every unit and type, add FAILURE_TYPE_DRIFT to both messages and the `failure` console command, and add a test that fails whenever a message constant has no name.
2026-09-07 09:16:38 -06:00
Claudio Chies 6bfe60507d feat(failure_injection): add CAN bus failure injection (#28140) 2026-08-25 10:33:52 +02:00
55bb872df1 feat(failure_injection): add ADS-B traffic failure injection and battery severity levels (#27950)
* feat(failure_injection): add ADS-B traffic-avoidance failure injection

Wire up FAILURE_UNIT_SYSTEM_TRAFFIC_AVOIDANCE (107) for the MAVLink-based
traffic avoidance path:

- OFF suppresses and STUCK freezes the incoming transponder_report, applied
  both at the MAVLink ADS-B ingestion (handle_message_adsb_vehicle) and at
  the navigator consumer (check_traffic), so it works for real ADS-B over
  MAVLink, simulated ADS-B and the fake_traffic command.
- OFF additionally marks the ADS-B/FLARM heartbeat unhealthy so the traffic
  avoidance system health check fails, using a message-less process()
  overload.
- Add the unit to the capability catalogue (OK/OFF/STUCK), the failure
  console command, the RC-switch unit selector and the docs.

The matching MAVLink FAILURE_UNIT enum entry lives in the mavlink submodule
(common.xml) and is handled by a separate PR; the uORB mirrors in
VehicleCommand.msg and FailureInjection.msg are included here.

* feat(failure_injection): enhance battery failure injection with severity levels

* feat(failure_injection): improve battery failure handling with dynamic threshold parameters

* refactor(failure_injection): remove traffic avoidance example from documentation

* docs(docs): subedit

* feat(failure_injection): add variance setting for distance sensor and integrate rangefinder in simulator

* feat(docs): add failure injection to release notes

* docs(docs): Add sim_mavlink back to heading

* fix(failure_injection): update default battery failure injection severity to Emergency

* docs(docs): get away from footnotes

* feat(failure_injection): enhance battery failure injection handling and update traffic unit support

* feat(failure_injection): add traffic avoidance handling tests and configurations

* [AUTO COMMIT] update EKF change indication

See .github/workflows/checks.yml for more details

* Apply suggestion from @hamishwillee

* feat(failure_injection): update failure types and handling for traffic avoidance and ESC telemetry

* fix(typo)

* [AUTO COMMIT] update EKF change indication

See .github/workflows/checks.yml for more details

* fix(docs): clarify notes on GPS and airspeed handling in failure injection documentation

---------

Co-authored-by: Claudio Chies <chiesc@chies.com>
Co-authored-by: Hamish Willee <hamishwillee@gmail.com>
2026-08-21 14:23:06 +02:00
Hamish Willee 3f9c6ec2c3 feat(mavlink): MAV_CMD_DO_SET_MISSION_CURRENT support (#28105) 2026-07-30 14:38:13 +10:00
Claudio ChiesandClaudio Chies d63f30c612 feat(failure_injection): Enable failure-injection on hardware, and through RC-switch (#27832)
* feat(failure_injection): integrate failure injection support across sensor drivers

* feat(failure_injection): enhance failure injection with RC switch support and instance bitmasking

feat(failure_injection): add disabled failure injection manager and system command support for v5x and v6x boards

* feat(failure_injection): add battery failure injection

Add a value-mutating apply-site for FAILURE_UNIT_SYSTEM_BATTERY. On an
injected OFF the outgoing battery_status is reported as a depleted pack
(zero remaining, emergency warning) so the low-battery failsafe triggers.

The apply-site lives in the shared Battery library, covering the analog
ADC, INA power monitors, ESC battery and SITL in one place, plus the
UAVCAN battery driver which publishes battery_status directly. The
previous SITL-only hack in BatterySimulator is removed in favour of this
shared path so simulation and hardware behave identically.

* fix(failure_injection): change parameter types from int32 to enum

* refactor(failure_injection): disable failure injection manager and system commands across multiple boards

* feat(failure_injection): enhance failure injection with timestamp handling and message-less support

* refactor(failure_injection): simplify has_timestamp_sample implementation and remove unused includes

* refactor(failure_injection):move conditional compilation into helper libary

* refactor(failure_injection): update CMakeLists to include failure_injection dependency across multiple drivers

---------

Co-authored-by: Claudio Chies <chiesc@chies.com>
2026-07-15 07:56:13 -07:00
Hamish Willee ad10373383 feat(mavlink): MAV_CMD_DO_SET_GLOBAL_ORIGIN added (#24697) 2026-07-02 10:08:52 +12:00
mahima-yoga 8b3ef1cf9e feat(navigator): add Guided Course mode for fixed-wing
Implements a new GUIDED_COURSE navigator mode that maintains a constant
ground-track bearing, altitude, and airspeed without manual stick input.
The mode is activated via MAVLink and accepts real-time in-flight updates:
  - MAV_CMD_GUIDED_CHANGE_HEADING (HEADING_TYPE_COURSE_OVER_GROUND): set course
  - MAV_CMD_DO_CHANGE_ALTITUDE: adjust target altitude
  - MAV_CMD_DO_CHANGE_SPEED: adjust target airspeed

On activation the vehicle captures its current velocity vector as the
initial course bearing. A valid horizontal velocity estimate (GPS or
dead-reckoning) is required; course commands are rejected if unavailable.
2026-05-27 10:51:55 +02:00
Balduin 84a287cd43 feat(msg): add VEHICLE_CMD_ACTUATOR_GROUP_TEST for actuator group testing
matching
 - https://github.com/mavlink/mavlink/pull/2224
 - https://github.com/mavlink/mavlink/pull/2476
2026-05-18 16:14:31 +02:00
Jacob Dahl 8bd42e728e feat(crsf_rc): add CRSF receiver bind command (#26790)
* feat(crsf_rc): add CRSF receiver bind command

Add ability to initiate CRSF receiver binding from QGroundControl or
the NSH console. When MAV_CMD_START_RX_PAIR is received with
RC_TYPE_CRSF, the driver sends the CRSF bind command frame over UART.

Binding is rejected when armed or on singlewire configurations.

Also adds RC_TYPE and RC_SUB_TYPE constants to VehicleCommand.msg and
replaces magic numbers in DsmRc and RCInput drivers.

Based on PX4/PX4-Autopilot#23294.

* style(crsf_rc): use C++ style comment

* style(crsf_rc): zero-init vcmd, remove noisy comments, drop unused enum value

* fix(rc): check write return value in BindCRSF, guard Spektrum bind against invalid sub-type

* fix(rc): warn and deny invalid Spektrum bind sub-type

Previously, an unrecognized param2 sub-type would silently leave
dsm_bind_pulses at 0 and return the generic UNSUPPORTED ACK. Add an
explicit else-branch that logs a PX4_WARN and returns DENIED so users
get clear feedback in QGC.
2026-05-15 19:42:53 -06:00
Marco Hauswirth 6306c78f79 feat(ekf2): EKF2_SENS_EN param, SensEnBit enum, MAVLink fusion command
Add EKF2_SENS_EN bitmask parameter (replaces EKF2_EN_BOOT) with
per-sensor enable bits. initFusionControl reads SENS_EN while disarmed.
handleSensorFusionCommand sets FusionSensor.enabled via
VEHICLE_CMD_ESTIMATOR_SENSOR_ENABLE. syncSensEnParam writes back to
param on disarm. Update EstimatorFusionControl.msg to bool
intended/active fields. Update VehicleCommand.msg FUSION_SOURCE enum.
2026-04-02 16:20:19 +02:00
Marco Hauswirth 0dd1640a54 feat(ekf2): enable fusion-ctrl toggle over mavlink cmd, CTRL param act only as reference 2026-04-02 16:20:19 +02:00
Jacob Dahl f00e46f618 feat(dshot): Extended Telemetry and EEPROM support
Overhauls the DShot driver with per-timer BDShot selection, multi-timer                                                                                                                                  
sequential capture, Extended DShot Telemetry (EDT), and AM32 ESC EEPROM                                                                                                                                  
read/write via MAVLink. Expands ESC support from 8 to 12 channels.                                                                                                                                       
                                                                                                                                                                                                   
BDShot:                                                                                                                                                                                                  
- Per-timer BDShot protocol selection via actuator config UI                                                                                                                                             
- Multi-timer sequential burst/capture on any DMA-capable timer                                                                                                                                          
- Adaptive per-channel GCR bitstream decoding                                                                                                                                                            
- Per-channel online/offline detection with hysteresis                                                                                                                                                   
                                                                                                                                                                                                   
Extended DShot Telemetry (EDT):                                                                                                                                                                          
- Temperature, voltage, current from BDShot frames (no serial wire)                                                                                                                                      
- New DSHOT_BIDIR_EDT parameter                                                                                                                                     
- EDT data merged with serial telemetry when both available                                                                                                                                              
                                                                                                                                                                                                   
AM32 EEPROM:                                                                                                                                                                                             
- Read/write AM32 ESC settings via MAVLink ESC_EEPROM message                                                                                                                                            
- ESCSettingsInterface abstraction for future ESC firmware types                                                                                                                                         
- New DSHOT_ESC_TYPE parameter                                                                                                                                                                           
                                                                                                                                                                                                   
Other changes:                                                                                                                                                                                           
- Per-motor pole count params DSHOT_MOT_POL1–12 (replaces MOT_POLE_COUNT)                                                                                                                              
- EscStatus/EscReport expanded to 12 ESCs with uint16 bitmasks                                                                                                                                           
- Numerous bounds-check, overflow, and concurrency fixes                                                                                                                                                 
- Updated DShot documentation
2026-03-17 16:38:33 -08:00
Brandon W. Banks 1345b3500a Vehicle command for Prearm Safety button (#26079)
* added vehicle command and support to remotely activate/deactivate the safety system (#26078)

* added print_status support for prearm safety status

* updated safety button to map to MAV_CMD_DO_SET_SAFETY_SWITCH_STATE = '5300'

* safety switch cmd: fixed incorrect catch-all and added commanded_state variable for easier reading
2025-12-15 11:25:32 -09:00
mahima-yoga ca83b8330d autotune: enable autotune in mission mode
When operating fully autonomously (i.e., without manual control or a guaranteed link to the ground station), tuning a vehicle can be difficult since the current autotune process requires either RC input or a GCS command. For these scenarios, it it useful to be able to start autotune inside a mission.
2025-12-05 14:03:10 +01:00
Jacopo Panerati 6901bc6a01 VTOL Takeoff: Use VehicleCommand specified heading for VTOL transition (#24040)
* Use VehicleCommand heading for VTOL transition

* options for param2 of vehicle_cmd_nav_vtol_takeoff
2025-11-25 09:46:48 +01:00
bresch 82308da18d ekf2: support heading external update from MAV_CMD_EXTERNAL_ATTITUDE_ESTIMATE 2025-09-18 17:00:16 +02:00
Hamish Willee b4b3c2a4a1 VehicleCommand.msg - update to new docs standards (#24855) 2025-05-24 16:03:04 +10:00
Hamish Willee 9cf3e83197 VehicleCommand.msg - takeoff & global position (#24574)
* VehicleCommand.msg - takeoff & global position

* Apply suggestions from code review

* Update msg/versioned/VehicleCommand.msg

* Update msg/versioned/VehicleCommand.msg

* Update msg/versioned/VehicleCommand.msg

* Update msg/versioned/VehicleCommand.msg

* Update msg/versioned/VehicleCommand.msg

* Update msg/versioned/VehicleCommand.msg
2025-05-01 18:37:46 +10:00
GuillaumeLaine 4fe7d713d3 msg: introduce message versioning 2024-12-13 16:34:37 +01:00