* feat(secure_bootloader): add ed25519 key and signing helpers
Scaffolding for PX4 secure-boot firmware signing, split into two
self-contained scripts:
- generate_signing_keys.py: produces <name>.json (private+public hex)
for use by sign_firmware.py and <name>.pub (C-array public key)
for inclusion in the bootloader build via CONFIG_PUBLIC_KEYn.
Refuses to overwrite existing private-key files.
- sign_firmware.py: pads an input .bin to a 4-byte boundary and
appends a 64-byte ed25519 signature, producing a file that drops
directly into the flash slot described by the image TOC.
Optionally appends an R&D certificate binary after the signature.
Replaces the signing path of the old Tools/cryptotools.py that was
removed along with the log-encryption cleanup; the new layout keeps
bootloader-signing tooling separate from log encryption to avoid
confusing the two independent crypto surfaces.
* fix(bootloader): panic if px4_get_secure_random is ever called
sw_crypto's crypto_open() unconditionally references
px4_get_secure_random from its XCHACHA20 path, so even a bootloader
that only performs ed25519 signature verification (and never touches
stream ciphers) pulls in an undefined symbol at link time.
The app build resolves it through nuttx_random.c, which is gated
behind CONFIG_CRYPTO_RANDOM_POOL and only compiled in when the
NuttX random pool is enabled. That config isn't on in the tiny
bootloader NuttX defconfig, and enabling it would pull in a pile
of kernel code the bootloader doesn't need.
Supply the symbol locally, but make it call up_assert() instead of
returning zeros. Silently handing out predictable bytes would be a
serious security bug if anyone later enables the XCHACHA20 path in
the bootloader without wiring up a real RNG. Aborting makes the
mistake impossible to miss.
* fix(bootloader): add PROTO_VERIFY_SIG opcode for upload-time signature check
Today a signed-boot failure is invisible to the uploader: verify_app()
runs inside jump_to_app() after PROTO_BOOT has already rebooted the
chip, so the host sees a successful upload followed by the device
silently staying in the bootloader. There is no protocol-level signal
that the image that was just written is not going to run.
Add PROTO_VERIFY_SIG (0x39) so the host can ask the bootloader to run
find_toc() + verify_app(0) *before* the reboot and get a concrete
OK / FAILED / INVALID answer back over the still-open USB connection.
The new opcode is gated on BOOTLOADER_USE_SECURITY: bootloaders built
without secure boot return cmd_bad (INSYNC/INVALID) so an uploader
can tell "I don't know this command" apart from "verification failed".
Two subtleties required care:
1. PROG_MULTI deliberately defers the very first word of the app
image to a RAM variable (first_word) and only commits it to flash
inside PROTO_BOOT, so a partial upload can never become bootable.
But verify_app() reads directly from flash, so if we verified
before committing first_word, even a valid image would always
fail (the first four bytes at APP_LOAD_ADDRESS would still be
0xffffffff). The handler therefore mirrors the first half of the
PROTO_BOOT handler: gate on STATE_ALLOWS_REBOOT, program the
deferred first word, then run the crypto check.
2. On failure we deliberately do not try to "undo" the first-word
write — H7 flash programming granularity makes it impossible to
revert in place, and the device was going to end up in the same
reject state at the next boot either way. The improvement is
purely that the uploader sees the failure before REBOOT instead
of after.
Chose opcode 0x39 to stay clear of ArduPilot's 0x28 (READ_MULTI) and
0x40 (CHIP_FULL_ERASE), which PX4 does not currently use but which
an AP-compatible uploader might.
ArduPilot also has bootloader secure boot (monocypher ed25519, like
us) but their verification runs at boot time, not upload time — so
neither project currently solves the "upload silently wrote a bad
image" problem. This puts PX4 ahead on that.
* feat(Tools): add --image_signed to mark signed firmware for uploader
px_uploader.py only needs to run signature verification over USB for
images that actually carry a signature — asking the bootloader to
verify an unsigned image would always fail, and the extra round trip
is wasted time for the common unsigned case. It therefore needs a
reliable way to tell the two apart.
We cannot tell by inspecting the bytes: a sign_firmware.py output is
just the raw .bin with 64 bytes of ed25519 signature glued on the
end, indistinguishable in content from an unsigned image of the same
padded length. The natural place to put the flag is the .px4 JSON
envelope, which already carries board_id / version / summary / etc.
Add --image_signed to px_mkfw.py, which sets "image_signed": true
in the emitted JSON. The flag has no effect on what bytes actually
end up on the device — it just tells the uploader "this blob has a
signature, please verify it before booting".
* feat(Tools): verify firmware signature before reboot
After PROG_MULTI + GET_CRC, send a new VERIFY_SIG opcode (0x39) to
the bootloader to check the ed25519 signature over the freshly
flashed image *before* sending REBOOT. This way a signature failure
is reported as a clean error from the uploader script, instead of a
silent "device stays in bootloader after reboot" that leaves the user
guessing.
The uploader always probes VERIFY_SIG. The bootloader is the source
of truth for whether secure boot is enabled:
- INSYNC/OK -> verification passed, proceed to REBOOT
- INSYNC/FAILED -> raise; "Signature does not verify against any
trusted key" if the firmware claims to be signed,
"Secure bootloader rejected an unsigned image"
otherwise (= helpful guidance for the common
misconfiguration of uploading default firmware
to a secureboot bootloader)
- INSYNC/INVALID -> bootloader has no secure boot. Quietly proceed
unless the firmware metadata says image_signed,
in which case raise.
- recv timeout -> assume a pre-VERIFY_SIG bootloader, proceed.
Surfaces a "Verifying image signature... passed" line on the upload
status path when the firmware is marked signed, so users get a clear
positive signal that the secure-boot pipeline ran end-to-end.
Also drop the redundant logger.error in the upload() loop, which was
duplicating the error message printed by the top-level handler in
main() for every UploadError path (not specific to verify_signature,
but only became obvious once these clean error messages started
firing in normal usage).
* fix(cmake): fix .px4board variant resolution to require exact match
px4_config.cmake matched the requested CONFIG against each candidate
.px4board with `MATCHES`, which is a regex partial match. For a
config like `px4_fmu-v6x_bootloader_secureboot`, the iteration over
.px4board files (alphabetical glob order) would match
`bootloader.px4board` first — because "px4_fmu-v6x_bootloader" is a
prefix of "px4_fmu-v6x_bootloader_secureboot" — and stop, silently
selecting the wrong board config.
Use `STREQUAL` instead so each candidate has to match the full
requested CONFIG. Existing single-label cases (e.g. exact match on
`px4_fmu-v2_default` or `px4_fmu-v2`) are unaffected because they
were already exact in practice; this just plugs the prefix-match
hole that any future `<label>_<suffix>` variant would trip over.
* fix(nuttx): support bootloader_<variant> labels
Boards can ship bootloader variants beyond the default `bootloader`
label — e.g. a `bootloader_secureboot` that adds crypto + keystore
Kconfig on top of the same source tree. Two pieces of build glue
were hardcoded to the exact label `bootloader` and need to relax to
match any `bootloader_*` label:
1. platforms/nuttx/CMakeLists.txt picked the bootloader linker
script and bootloader-specific library list only when the label
was exactly `bootloader`. Any other label (including
`bootloader_secureboot`) silently fell through to the app build,
producing nonsensical link flags. Match `^bootloader` instead,
and explicitly set SCRIPT_PREFIX to `bootloader_` so all
bootloader variants share the single existing linker script
regardless of their full label.
2. platforms/nuttx/cmake/px4_impl_os.cmake selects the NuttX config
subdirectory by exact label match, falling back to `nsh` when no
matching directory exists. For `bootloader_secureboot` that fell
through to `nsh`, dragging in a full app-style NuttX with cromfs,
networking, and the full heap subsystem — a 128 KB bootloader
sector overflowed by ~50 KB. Add an intermediate fallback: if the
label starts with `bootloader` and a `bootloader/` subdir exists,
use that instead of `nsh`.
Both changes are backward-compatible: existing single-label
`bootloader` builds take exactly the same path as before. They only
gain the ability for boards to add `bootloader_<suffix>.px4board`
files without duplicating bootloader build wiring.
* feat(build): auto-sign secure-boot images via BOARD_SECUREBOOT
Add a Kconfig pair that boards can opt into:
CONFIG_BOARD_SECUREBOOT -- bool: sign the .px4 with ed25519
CONFIG_BOARD_SECUREBOOT_KEY -- string: path to JSON private key
(default: Tools/test_keys/test_keys.json)
When set, the .px4 build rule inserts a Tools/secure_bootloader/sign_firmware.py
step between the unsigned .bin and px_mkfw.py, and passes --image_signed
so the .px4 envelope's metadata flags it for the uploader's VERIFY_SIG
step. The unsigned .bin is still produced alongside the .px4, so users
can sign with their own key out-of-tree if they prefer.
A BOARD_SECUREBOOT_KEY environment variable overrides the Kconfig path
at build time, mirroring the override pattern used for CONFIG_PUBLIC_KEYn
in stub_keystore. This makes release builds practical:
BOARD_SECUREBOOT_KEY=/secure/path/release.json make px4_<board>_secureboot
Relative paths in the Kconfig are resolved against the repo root (not
the build directory) so the same value works regardless of where the
build runs from.
Default builds are byte-identical to before; the new code path is gated
on CONFIG_BOARD_SECUREBOOT being set.
* feat(boards): add secureboot demo variant + docs
Two coordinated build variants demonstrate end-to-end secure boot
on px4_fmu-v6x without touching the default builds:
px4_fmu-v6x_secureboot -- the app, with TOC + signing
px4_fmu-v6x_bootloader_secureboot -- the matching secure bootloader
App side (secureboot.px4board):
- Selects nuttx-config/scripts/secureboot-script.ld via
CONFIG_BOARD_LINKER_PREFIX. The script is a copy of the default
layout plus a fixed 0x800 reservation past the vector table for
the image TOC, and an empty .signature section at end-of-FLASH
so sign_firmware.py knows where the appended ed25519 signature
will land.
- Compiles src/toc.c (a four-entry IMAGE_MAIN_TOC matching the
layout used elsewhere in the tree) into drivers_board, gated on
PX4_BOARD_LABEL == secureboot so the default build still
produces the existing layout.
- Sets CONFIG_BOARD_SECUREBOOT=y so the .px4 build rule signs the
image with the upstream test key by default.
Bootloader side (bootloader_secureboot.px4board):
- Enables CONFIG_BOARD_CRYPTO + DRIVERS_SW_CRYPTO + DRIVERS_STUB_KEYSTORE,
which links monocypher and the stub keystore into the bootloader.
- Bakes Tools/test_keys/key0.pub in as CONFIG_PUBLIC_KEY0, paired
with the test_keys.json the app variant signs with.
- hw_config.h gates BOOTLOADER_USE_SECURITY, BOOTLOADER_SIGNING_ALGORITHM
(CRYPTO_ED25519), and BOARD_IMAGE_TOC_OFFSET (0x800) on PX4_CRYPTO,
so they only activate in this variant.
Together the two variants implement the workflow:
make px4_fmu-v6x_bootloader_secureboot # build + flash via SWD once
make px4_fmu-v6x_secureboot upload # signs with test key, verifies
Bootloader fits in 128 KB (~57 KB used) thanks to --gc-sections
stripping the unused libtomcrypt code; nothing in the bootloader
binary depends on monocypher beyond the ed25519 verifier.
Replace the bundled test key for production with
Tools/secure_bootloader/generate_signing_keys.py output and update
both .px4board files (or set BOARD_SECUREBOOT_KEY at build time) —
see docs/en/advanced_config/bootloader_secure_boot.md.
* fix(boards): cap H7 bootloader linker scripts at 128 KB
Roughly half of the H7 boards in tree had `LENGTH = 2048K` for the
bootloader sector in their bootloader_script.ld, even though the
matching app linker script places APP_LOAD_ADDRESS at 0x08020000 —
i.e. the bootloader actually only owns the first 128 KB sector.
The 2048K constraint is wrong: it lets a bootloader that grew past
the 128 KB sector silently overflow into the app sector at link
time and corrupt the start of the app on flash. The linker should
fail the build instead.
The current default bootloader is ~46 KB, well under 128 KB on every
affected board, so this change is a no-op for default builds. It
just plugs a footgun for anyone adding bootloader features (secure
boot, extra UI, network boot, ...) that would have otherwise
silently grown into the app's flash range.
Boards fixed:
3dr-style H7 reference boards: cubepilot/cubeorange,
cubepilot/cubeorangeplus, holybro/durandal-v1, narinfc/h7
vendor variants: corvon/743v1, cuav/nora, cuav/x7pro,
gearup/airbrainh743, hkust/nxt-dual, hkust/nxt-v1,
matek/h743, matek/h743-mini, matek/h743-slim,
micoair/h743, micoair/h743-aio, micoair/h743-lite,
micoair/h743-v2, x-mav/ap-h743r1, x-mav/ap-h743v2
Boards already correct (LENGTH = 128K) are unchanged.
* fix(ci): add pynacl to Python requirements
Tools/secure_bootloader/sign_firmware.py uses PyNaCl for ed25519
signing, and the .px4 build rule for boards with CONFIG_BOARD_SECUREBOOT
calls it as part of the normal build (e.g. px4_fmu-v6x_secureboot).
Without pynacl in the dev requirements, those builds fail in CI and
fresh dev setups.
* docs(update): Subedit
* docs(update): Fix example error I made
* fix(docs): document BOOT and SIG1 regions
* fix(platforms): style fix
* fix(ci): workaround to get pip dependency
* fix(ci): fall back to plain pip on older build containers
The voxl2 build image ships a pip that predates --break-system-packages
(added in pip 23.0.1), so the install step blew up with "no such option".
Modern containers enforce PEP 668 and need the flag; older ones don't
support it but also don't enforce PEP 668, so plain pip works there.
Try the modern flag first, fall back if pip rejects it.
Signed-off-by: Julian Oes <julian@oes.ch>
* fix(build): strip BUILD_DIR_SUFFIX from CONFIG in cmake-build
cmake-build was passing the full build-dir name (including any
BUILD_DIR_SUFFIX like _replay or _failsafe_web) as -DCONFIG=, which
the board-lookup in cmake/px4_config.cmake then tried to match
against <vendor>_<model>_<label> .px4board files. That used to work
by accident because px4_config.cmake matched with regex MATCHES, but
since the switch to STREQUAL (needed to disambiguate
bootloader_secureboot from bootloader) the suffixed CONFIG no longer
matches anything and LABEL ends up empty, tripping a CMake error in
kconfig.cmake.
Pass the bare CONFIG and keep the suffix only on the build dir so
both concerns are independent.
Signed-off-by: Julian Oes <julian@oes.ch>
---------
Signed-off-by: Julian Oes <julian@oes.ch>
Co-authored-by: Hamish Willee <hamishwillee@gmail.com>
* rt106x: Use platform SPI hal layer
* rt106x: Add romapi support and reboot to isp/bootloader
* bootloader: imxrt_common: Add rt106x support
* NXP MR-Tropic initial commit
* Add missing file for mr-tropic bootloader
* nxp-mr-tropic:Bootloader Alow Assertion debugging & Keep Ram Vectors
* nxp-mr-tropic: Firmware Boot from bootloader
* nxp-mr-tropic:Add Bootloader bin file
* mr-tropic: Update config and linker
Fixes enet issues with write-back and some code cleanup.
Furthermore increase NOR LittleFS to 256kB to reflect on linker
* Update NuttX
* mr-tropic: fix itcm apping and add mr-tropic to itcm check
---------
Co-authored-by: David Sidrane <David.Sidrane@NscDg.com>
nsh console running on USB
param module running
working with i2c and common drivers
provided implementation for drv_pwm_output.h
i2cdetect working as expected with no device
mavlink started succesfully
mounts sd card and logger runs
logger to file succesfully
pwm_servo implemented without using Nuttx lib
pwm_out outputs expected waveforms
- however currently if the frequency is higher than what the pwm_out
driver runs, there will be aliasing, based on how the registers gets
resets
wifi softap working
- Seeing wifi hotspot
- cant connect due to wrong password
- problems with adjusting ssid and password
wifi ssid and password being set accordinglu
connected to wifi hotspot with dhpcd
- made some changes to nuttx to only build for SoftAP mode, however this
was effectivelyy removing the ifdef for STATION mode. Should investigate
the coexist option again
added ifdef to not use timer 0 when wifi enabled
- reverted esp32 rt_timer to make use of timer 0 by default
fix setting incorrect bit in hrt timer register
- hrt running as expected, but on startup the pwm_out driver starts up
at about 200Hz and then rises over a minute or so 250Hz. Not sure if
this was present previously, and could be due to Wifi running at time
priority on timer 0
pull xtensa compilers in setup.ubuntu.sh
revert logger stacksize and cmake argument
esp32 chip revision and PX4 UUID implemented
spi board reset implemented, formatting checked
devkit acts on startup as a wifi bridge for comms
- the most usefull setting for the general developer when buying a esp32 devkit
- testing Mavlink shell using ./Tools/mavlink_shell.py
- todo: Test mavlink messages being forward
improve wifi telemetry by increasing prio
- Remove power save mode on wifi
- increased daemon thread schedule priority to 50
compiles without Nuttx changes
- updated compiler settings to match those of nuttx on px4 side
add espressif_esp32 to excluded boards
ci: allow docker to find xtensa compilers
* Add tflm to px4 with module
- Add TensorFlow Lite Micro(TFLM) as a library in px4
- Make a module that uses neural network inference for control, which uses TFLM for inference
- Make board config files for PX4 with neural module
* Added neural flight mode
* Add posibility to read of inference times
* Fix comments from review:
- Switch ssh link to https link in submodule
- Remove mc_nn_control from startup
* Add tflm to px4 with module
- Add TensorFlow Lite Micro(TFLM) as a library in px4
- Make a module that uses neural network inference for control, which uses TFLM for inference
- Make board config files for PX4 with neural module
* Added neural flight mode
* Add posibility to read of inference times
* Remove auto start
* Add logging from neural control module
* Fix automatic startup to only be when module is included
* Switch to flight mode registration
* Add docs
* Change min/max/coeff to actual parameters
* add figures to neural network docs
* Switch to e2e network
* Remove toolchain changes and replace with instructions in docs
* Get ready for merge after toolchain upgrade
* switch back to submodule
* Try to figure out cmake
* Get CI working with new toolchain
* Remove fork dependency
* Finalize PR
* fix toolchain inclusion
* Fix ctype_base.h include
* Cleanup includes for TFLM
* Remove redundant std
* Update FW module names in board files
* Fix docs
* Remove cstdlib copy
* Copy header from nuttx
* Prettier, markup, layout
* NeuralControl.msg - update uorb comments to current standard
* Add description to neural topic
* Fix typo
* Typo
* TFLM and Module utitlities
* Neural networks top level
* Update docs
* Add manual control
* Update docs
* Revert the manual control attempt
* Update docs/en/advanced/nn_module_utilities.md
* Add posibility to set trajectory setpoint with manual control
---------
Co-authored-by: Pedro Roque <padr@kth.se>
Co-authored-by: Hamish Willee <hamishwillee@gmail.com>
Co-authored-by: Ramon Roche <mrpollo@gmail.com>
imxrt:117x Reuse all but io_timer_hw_description and imxrt_pinirq.c
imxrt:ADC & LPADC bifurcation and restructuring
imxrt:hrt support Up to GPT6
nxp/rt117x:adc Corrected
- new ROS2 platform in PX4 intended for creating configs that build and run entirely in ROS2
- PX4_CONFIG defaults to px4_ros2_default if no config specified and in a colcon workspace with ROS_VERSION=2
- currently doesn't do much other than allow you to build px4 msgs interface package
the nuttx and posix specific options files since this option cannot be used with
the qurt platform. There are header files in the hexagon sdk that fail this check.
For NuttX protected or kernel build, the prebuilds can't contain libraries which are
different for kernel and user-space in protected/kerenl builds
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
- cmake NuttX build wrapper compile in place instead of copying source tree to build directory
- slightly faster skipping necessary copying (depending on system)
- allows debugging in place
- easier to work directly in NuttX following official documentation
- simplifies overall build which should make it easier to resolve any remaining NuttX dependency issues in the build system
- the downside is switching back and forth between different builds always require rebuilding NuttX, but I think this is worth the improved developer experience
- also no longer builds px4io and bootloader in every single build, for most users these rarely change and we're wasting a lot of build time
The bulk of this change was tightly coupled and needed to be deleted in one pass. Some of the smaller changes were things that broke as a result of the initial purge and subsequently fixed by further eradicating unnecessary platform differences. Finally, I deleted any dead code I came across in the related files I touched while going through everything.
- DriverFramework (src/lib/DriverFramework submodule) completely removed
- added dspal submodule in qurt platform (was brought in via DriverFramework)
- all df wrapper drivers removed
- all boards using df wrapper drivers updated to use in tree equivalents
- unused empty arch/board.h on posix and qurt removed
- unused IOCTLs removed (pub block, priv, etc)
- Integrator delete methods only used from df wrapper drivers
- commander: sensor calibration use "NuttX version" everywhere for now
- sensors: update to px4_{open, read, close} instead of DevMgr wrapper (adc open for analog differential pressure)
- battery_status: update to px4_{open, read, close} instead of DevMgr wrapper (adc open for analog differential pressure)
- cdev cleanup conflicting typedefs and names with actual OS (pollevent_t, etc)
- load_mon and top remove from linux boards (unused)
- delete unused PX4_MAIN_FUNCTION
- delete unused getreg32 macro
- delete unused SIOCDEVPRIVATE define
- named each platform tasks consistently
- posix list_devices and list_topics removed (list_files now shows all virtual files)
- instrumenting PX4 Matrix and Param methods is too burdensome
- partially restore px4_fmu-v5_stackcheck and holybro_durandal-v1_stackcheck to match default configs
These hard coded paths assume all Nuttx targets are ARMv7-M targets. Updating them to use ${CONFIG_ARCH} and ${CONFIG_ARCH_FAMILY} instead allows for the architecture defined by the incoming Nuttx defconfig to be correctly targeted.
