Since b11e615810 src/modules/zenoh/Kconfig sources the generated topic
catalog through ZENOH_KCONFIG_TOPICS, which only cmake exports, so every
standalone Kconfig parse crashed and build_all_targets produced an empty
build matrix on every run while the scan job still reported success.
Add Tools/kconfig/loadconfig.py as the single entry point for parsing
the Kconfig tree outside cmake: it generates the topic catalog exactly
like cmake/kconfig.cmake and provides shared board/target enumeration
and config loading. Port generate_board_targets_json.py (CI matrix) and
updateconfig.py (make updateconfig) to it; both were independently
broken and each reimplemented board scanning on its own.
Harden the workflow so the next failure of this class is loud: run the
generator as a standalone assignment, so bash -e fails the step (the
previous echo "matrix=$(...)" form masked the exit code), and write
the JSON outputs through the heredoc GITHUB_OUTPUT form.
Matrix output verified byte-identical to the pre-b11e6158101 baseline
in all three modes; updateconfig output verified identical against the
same baseline.
Assisted-by: Claude:claude-fable-5
Signed-off-by: Ramon Roche <mrpollo@gmail.com>
Add a scalable .deb packaging framework for VOXL2, built on the
existing cmake/package.cmake CPack infrastructure. The framework
handles multi-processor boards by having the POSIX (_default) build
own the .deb and pull in the companion SLPI build's artifacts.
Board-specific files:
- cmake/package.cmake: CPack variable overrides (name, deps, version)
- cmake/install.cmake: install() rules for all .deb contents
- debian/postinst: px4-* symlinks, DSP signature, directory setup
- debian/prerm: service stop, symlink cleanup
- debian/voxl-px4.service: systemd unit (after sscrpcd)
Infrastructure changes:
- cmake/package.cmake: hook for board-specific CPack overrides
- platforms/posix/CMakeLists.txt: hook for board install.cmake
- Makefile: %_deb pattern rule (build _default, then cpack -G DEB)
- CI: auto-discover _deb targets, collect .deb artifacts, upload
to GitHub Releases
Future boards: add cmake/package.cmake + cmake/install.cmake and
CI discovers it automatically. No new file formats or tools needed.
Signed-off-by: Ramon Roche <mrpollo@gmail.com>
Read companion_targets files from board directories and exclude those
targets from CI grouped builds. The parent target builds them via
Make prerequisite, avoiding redundant CI jobs.
Signed-off-by: Ramon Roche <mrpollo@gmail.com>
os.scandir() returns entries in non-deterministic order, which caused
voxl2-slpi to sometimes build before voxl2_default (which it depends
on). Sort all os.scandir() calls lexicographically by name so the
shorter prefix voxl2 always precedes voxl2-slpi.
Remove modalai_voxl2 and qurt from CI exclusion lists and add
container overrides to use the private ghcr.io/px4/px4-dev-voxl2
image which contains the Qualcomm Hexagon SDK.
- Add voxl2 build group with x64 runner for cross-compilation
- Add GHCR credentials to workflow for private container pull
- Add packages:read permission to workflow
- Auto-build libfc_sensor.so stub during cmake configure
- Handle missing .px4/.elf gracefully in artifact packaging
Signed-off-by: Ramon Roche <mrpollo@gmail.com>
nsh console running on USB
param module running
working with i2c and common drivers
provided implementation for drv_pwm_output.h
i2cdetect working as expected with no device
mavlink started succesfully
mounts sd card and logger runs
logger to file succesfully
pwm_servo implemented without using Nuttx lib
pwm_out outputs expected waveforms
- however currently if the frequency is higher than what the pwm_out
driver runs, there will be aliasing, based on how the registers gets
resets
wifi softap working
- Seeing wifi hotspot
- cant connect due to wrong password
- problems with adjusting ssid and password
wifi ssid and password being set accordinglu
connected to wifi hotspot with dhpcd
- made some changes to nuttx to only build for SoftAP mode, however this
was effectivelyy removing the ifdef for STATION mode. Should investigate
the coexist option again
added ifdef to not use timer 0 when wifi enabled
- reverted esp32 rt_timer to make use of timer 0 by default
fix setting incorrect bit in hrt timer register
- hrt running as expected, but on startup the pwm_out driver starts up
at about 200Hz and then rises over a minute or so 250Hz. Not sure if
this was present previously, and could be due to Wifi running at time
priority on timer 0
pull xtensa compilers in setup.ubuntu.sh
revert logger stacksize and cmake argument
esp32 chip revision and PX4 UUID implemented
spi board reset implemented, formatting checked
devkit acts on startup as a wifi bridge for comms
- the most usefull setting for the general developer when buying a esp32 devkit
- testing Mavlink shell using ./Tools/mavlink_shell.py
- todo: Test mavlink messages being forward
improve wifi telemetry by increasing prio
- Remove power save mode on wifi
- increased daemon thread schedule priority to 50
compiles without Nuttx changes
- updated compiler settings to match those of nuttx on px4 side
add espressif_esp32 to excluded boards
ci: allow docker to find xtensa compilers
