unitName()/typeName() lacked the FAILURE_UNIT_DATALINK_*/FAILURE_UNIT_BUS_* units, so `failure can off` was announced as unit "unknown". FailureInjection.msg and VehicleCommand.msg also disagreed on FAILURE_TYPE_DRIFT (MAVLink FAILURE_TYPE 8).
Name every unit and type, add FAILURE_TYPE_DRIFT to both messages and the `failure` console command, and add a test that fails whenever a message constant has no name.
* feat(failure_injection): add ADS-B traffic-avoidance failure injection
Wire up FAILURE_UNIT_SYSTEM_TRAFFIC_AVOIDANCE (107) for the MAVLink-based
traffic avoidance path:
- OFF suppresses and STUCK freezes the incoming transponder_report, applied
both at the MAVLink ADS-B ingestion (handle_message_adsb_vehicle) and at
the navigator consumer (check_traffic), so it works for real ADS-B over
MAVLink, simulated ADS-B and the fake_traffic command.
- OFF additionally marks the ADS-B/FLARM heartbeat unhealthy so the traffic
avoidance system health check fails, using a message-less process()
overload.
- Add the unit to the capability catalogue (OK/OFF/STUCK), the failure
console command, the RC-switch unit selector and the docs.
The matching MAVLink FAILURE_UNIT enum entry lives in the mavlink submodule
(common.xml) and is handled by a separate PR; the uORB mirrors in
VehicleCommand.msg and FailureInjection.msg are included here.
* feat(failure_injection): enhance battery failure injection with severity levels
* feat(failure_injection): improve battery failure handling with dynamic threshold parameters
* refactor(failure_injection): remove traffic avoidance example from documentation
* docs(docs): subedit
* feat(failure_injection): add variance setting for distance sensor and integrate rangefinder in simulator
* feat(docs): add failure injection to release notes
* docs(docs): Add sim_mavlink back to heading
* fix(failure_injection): update default battery failure injection severity to Emergency
* docs(docs): get away from footnotes
* feat(failure_injection): enhance battery failure injection handling and update traffic unit support
* feat(failure_injection): add traffic avoidance handling tests and configurations
* [AUTO COMMIT] update EKF change indication
See .github/workflows/checks.yml for more details
* Apply suggestion from @hamishwillee
* feat(failure_injection): update failure types and handling for traffic avoidance and ESC telemetry
* fix(typo)
* [AUTO COMMIT] update EKF change indication
See .github/workflows/checks.yml for more details
* fix(docs): clarify notes on GPS and airspeed handling in failure injection documentation
---------
Co-authored-by: Claudio Chies <chiesc@chies.com>
Co-authored-by: Hamish Willee <hamishwillee@gmail.com>
* feat(failure_injection): integrate failure injection support across sensor drivers
* feat(failure_injection): enhance failure injection with RC switch support and instance bitmasking
feat(failure_injection): add disabled failure injection manager and system command support for v5x and v6x boards
* feat(failure_injection): add battery failure injection
Add a value-mutating apply-site for FAILURE_UNIT_SYSTEM_BATTERY. On an
injected OFF the outgoing battery_status is reported as a depleted pack
(zero remaining, emergency warning) so the low-battery failsafe triggers.
The apply-site lives in the shared Battery library, covering the analog
ADC, INA power monitors, ESC battery and SITL in one place, plus the
UAVCAN battery driver which publishes battery_status directly. The
previous SITL-only hack in BatterySimulator is removed in favour of this
shared path so simulation and hardware behave identically.
* fix(failure_injection): change parameter types from int32 to enum
* refactor(failure_injection): disable failure injection manager and system commands across multiple boards
* feat(failure_injection): enhance failure injection with timestamp handling and message-less support
* refactor(failure_injection): simplify has_timestamp_sample implementation and remove unused includes
* refactor(failure_injection):move conditional compilation into helper libary
* refactor(failure_injection): update CMakeLists to include failure_injection dependency across multiple drivers
---------
Co-authored-by: Claudio Chies <chiesc@chies.com>
Implements a new GUIDED_COURSE navigator mode that maintains a constant
ground-track bearing, altitude, and airspeed without manual stick input.
The mode is activated via MAVLink and accepts real-time in-flight updates:
- MAV_CMD_GUIDED_CHANGE_HEADING (HEADING_TYPE_COURSE_OVER_GROUND): set course
- MAV_CMD_DO_CHANGE_ALTITUDE: adjust target altitude
- MAV_CMD_DO_CHANGE_SPEED: adjust target airspeed
On activation the vehicle captures its current velocity vector as the
initial course bearing. A valid horizontal velocity estimate (GPS or
dead-reckoning) is required; course commands are rejected if unavailable.
* feat(crsf_rc): add CRSF receiver bind command
Add ability to initiate CRSF receiver binding from QGroundControl or
the NSH console. When MAV_CMD_START_RX_PAIR is received with
RC_TYPE_CRSF, the driver sends the CRSF bind command frame over UART.
Binding is rejected when armed or on singlewire configurations.
Also adds RC_TYPE and RC_SUB_TYPE constants to VehicleCommand.msg and
replaces magic numbers in DsmRc and RCInput drivers.
Based on PX4/PX4-Autopilot#23294.
* style(crsf_rc): use C++ style comment
* style(crsf_rc): zero-init vcmd, remove noisy comments, drop unused enum value
* fix(rc): check write return value in BindCRSF, guard Spektrum bind against invalid sub-type
* fix(rc): warn and deny invalid Spektrum bind sub-type
Previously, an unrecognized param2 sub-type would silently leave
dsm_bind_pulses at 0 and return the generic UNSUPPORTED ACK. Add an
explicit else-branch that logs a PX4_WARN and returns DENIED so users
get clear feedback in QGC.
Overhauls the DShot driver with per-timer BDShot selection, multi-timer
sequential capture, Extended DShot Telemetry (EDT), and AM32 ESC EEPROM
read/write via MAVLink. Expands ESC support from 8 to 12 channels.
BDShot:
- Per-timer BDShot protocol selection via actuator config UI
- Multi-timer sequential burst/capture on any DMA-capable timer
- Adaptive per-channel GCR bitstream decoding
- Per-channel online/offline detection with hysteresis
Extended DShot Telemetry (EDT):
- Temperature, voltage, current from BDShot frames (no serial wire)
- New DSHOT_BIDIR_EDT parameter
- EDT data merged with serial telemetry when both available
AM32 EEPROM:
- Read/write AM32 ESC settings via MAVLink ESC_EEPROM message
- ESCSettingsInterface abstraction for future ESC firmware types
- New DSHOT_ESC_TYPE parameter
Other changes:
- Per-motor pole count params DSHOT_MOT_POL1–12 (replaces MOT_POLE_COUNT)
- EscStatus/EscReport expanded to 12 ESCs with uint16 bitmasks
- Numerous bounds-check, overflow, and concurrency fixes
- Updated DShot documentation
* added vehicle command and support to remotely activate/deactivate the safety system (#26078)
* added print_status support for prearm safety status
* updated safety button to map to MAV_CMD_DO_SET_SAFETY_SWITCH_STATE = '5300'
* safety switch cmd: fixed incorrect catch-all and added commanded_state variable for easier reading
When operating fully autonomously (i.e., without manual control or a guaranteed link to the ground station), tuning a vehicle can be difficult since the current autotune process requires either RC input or a GCS command. For these scenarios, it it useful to be able to start autotune inside a mission.