* Add Sony AS-DT1 Distance Sensor and Documentation
* Ensuring Rotation Parameter works
* Sony ASDT1 Sensor and Documentaiton
* Fixed formatting and added additional comments
* Forgot to stage 1 formatting issue
* fix(drivers): use AS-DT1 parameters consistently
remove the Sony-ASDT1 -R command line rotation, as well as some other small fixes. Updated the docs to reflect this as well.
* refactor(drivers): clarify Sony AS-DT1 variable names
---------
Co-authored-by: Sean Hickey <sean@ascendengineer.com>
Co-authored-by: Andrew Brahim <35986980+dirksavage88@users.noreply.github.com>
* docs(arkv6s): add flight controller documentation
Signed-off-by: Jacob Dahl <dahl.jakejacob@gmail.com>
* docs(arkv6s): add product photo and note single-IMU variant
Drop in docs/assets/flight_controller/arkv6s/ark_v6s_front.jpg
so the page renders the board photo it already references, and
align the intro with the upstream description by spelling out
that the V6S is the single-IMU variant of the V6X.
* docs(arkv6s): add bootloader UART note, fix arkv6x RAM typo
Add the bootloader serial port note (TELEM1-only in bootloader mode)
to the ARKV6S docs, matching the ARKV6X docs. Also fix the ARKV6X
MCU spec listing "1MB Flash" instead of "1MB RAM".
---------
Signed-off-by: Jacob Dahl <dahl.jakejacob@gmail.com>
* docs: add gazebo plugins doc
* add to sidebar and summary
* prettier and link to sources
* review feedback
* Minor subedit and crosslink
* Update docs/en/sim_gazebo_gz/plugins.md
---------
Co-authored-by: Hamish Willee <hamishwillee@gmail.com>
* docs: update module reference metadata
* Update failsafe metadata in docs
* Update parameter metadata
* Fix up uorb graphs based on main
* SUMMARY.md - and radio control for modules
* Add alternate sidebar
---------
Co-authored-by: PX4BuildBot <bot@pixhawk.org>
* hrt: Fix PPM input on channel 2
The CCMR1_PPM define for PPM input on channel 2 was incorrectly set to 2,
which was setting bits for channel 1 instead of channel 2. This prevented
PPM input from functioning properly on channel 2.
Changed CCMR1_PPM for channel 2 from 2 to (1 << 8), which correctly
configures the CC2S bits for input capture mode on TI2.
This fixes an issue noted in the existing code comment:
"FIXME! There is an interaction in the CCMR registers that prevents
using Chan 1 as the timer and chan 2 as the PPM"
Tested on STM32H743 with PPM input on PC7 (TIM8_CH2).
* rc_input: enable sharing serial and PPM pin
By setting RC_SERIAL_PORT_SHARED_PPM_PIN_GPIO_RX it is now possible to
use the same pin on the STM32 for PPM input as well as serial input.
* boards: Add support for Holybro KakuteH7-Wing
* Add vitepress tree
* Update existing workflows so they dont trigger on changes in the docs path
* Add nojekyll, package.json, LICENCE etc
* Add crowdin docs upload/download scripts
* Add docs flaw checker workflows
* Used docs prefix for docs workflows
* Crowdin obvious fixes
* ci: docs move to self hosted runner
runs on a beefy server for faster builds
Signed-off-by: Ramon Roche <mrpollo@gmail.com>
* ci: don't run build action for docs or ci changes
Signed-off-by: Ramon Roche <mrpollo@gmail.com>
* ci: update runners
Signed-off-by: Ramon Roche <mrpollo@gmail.com>
* Add docs/en
* Add docs assets and scripts
* Fix up editlinks to point to PX4 sources
* Download just the translations that are supported
* Add translation sources for zh, uk, ko
* Update latest tranlsation and uorb graphs
* update vitepress to latest
---------
Signed-off-by: Ramon Roche <mrpollo@gmail.com>
Co-authored-by: Ramon Roche <mrpollo@gmail.com>
