Make px4::atomic's value constructor and ModuleBase::Descriptor
constexpr so the ~40 per-module 'desc' statics are constant-initialised
instead of each emitting static-init code, and apply the same to the
mixer_module FunctionProvider table.
Signed-off-by: Balduin <balduin@auterion.com>
A seq_cst px4::atomic emits a hardware `dmb` on ARM. That barrier only orders
accesses as seen by a second observer (another CPU core or DMA); for inter-thread
synchronisation on a single-core (uniprocessor) target there is no second core, so
the `dmb` is dead weight - only the compiler ordering is required.
On a NuttX build without CONFIG_SMP, keep full seq_cst semantics but emit a
compiler-only fence (__atomic_signal_fence, zero instructions) instead of the
`dmb`. This mirrors Linux, where smp_mb()/smp_rmb()/smp_wmb() collapse to a
compiler barrier on uniprocessor builds. SMP NuttX and POSIX are unchanged (real
barriers, so SITL under ThreadSanitizer keeps full ordering). 64-bit types (not
lock-free on a 32-bit core) keep the existing interrupts-off critical section,
which already provides both atomicity and ordering.
The public API is unchanged - no per-call ordering knob. Verified on
arm-none-eabi Cortex-M7 that the single-core path emits no `dmb` while keeping
atomicity, and that SMP/POSIX is unchanged:
load (single-core): ldr (signal_fence: 0 instr)
store (single-core): str
fadd (single-core): ldrex/strex loop, no dmb
load (seq_cst/SMP): dmb ish; ldr; dmb ish
store (seq_cst/SMP): dmb ish; str; dmb ish
fadd (seq_cst/SMP): dmb ish; ldrex/strex; dmb ish
Shrinks fmu-v6x by ~2.8 KB (dead barriers removed from atomics already in use),
with no behaviour change. Note: inter-thread ordering only - DMA/device sync
still needs explicit barriers.
- perform full sensor signal path reset and wait for max time (100 ms)
- issue full sensor reset on any error
- always read FIFO count before transfersj
- only allocate drdy perf counter if GPIO is available
- fixed df_ltc2946_wrapper battery dependency
- fixed px4::atomic fetch_add for QuRT
- updated PX4 QuRT SPI wrapper to set bus frequency
- renamed "qurt-default" configs to just "qurt"
and remove the px4_ prefix, except for px4_config.h.
command to update includes:
for k in app.h atomic.h cli.h console_buffer.h defines.h getopt.h i2c.h init.h log.h micro_hal.h module.h module_params.h param.h param_macros.h posix.h sem.h sem.hpp shmem.h shutdown.h tasks.h time.h workqueue.h; do for i in $(grep -rl 'include <px4_'$k src platforms boards); do sed -i 's/#include <px4_'$k'/#include <px4_platform_common\/'$k/ $i; done; done
for in $(grep -rl 'include <px4_config.h' src platforms boards); do sed -i 's/#include <px4_config.h/#include <px4_platform_common\/px4_config.h'/ $i; done
Transitional headers for submodules are added (px4_{defines,log,time}.h)