* feat(msg): rename rover throttle setpoint to surface_vehicle_*
The throttle setpoint was the last rover topic shared by rovers and boats
without the surface_vehicle_* prefix decided in #29524. Rename
RoverThrottleSetpoint to SurfaceVehicleThrottleSetpoint and the
TYPE_ROVER_THROTTLE_* setpoint types to TYPE_SURFACE_VEHICLE_THROTTLE_*.
The type values are unchanged.
The topic rename breaks ROS 2 users anyway, so also shorten the fields of
the throttle and speed setpoints to x and y: the message name already says
what the value is and [@frame Body] states the frame.
Assisted-by: Claude:claude-opus-5-5
Signed-off-by: Michael Fritsche <frimi999@gmail.com>
* fix(zenoh): bring surface_vehicle rename to the zenoh dds topics
* fix(concept): rename rover throttle setpoint to surface_vehicle_* in navigation terminology
* fix(tools): update px4-ros2-interface-lib pin
* docs(msg): describe sideways fields as omnidirectional, not mecanum
The surface vehicle messages are shared by rovers and boats, and the lateral
axis applies to any vehicle that can move sideways, not only mecanum rovers.
Assisted-by: Claude:claude-opus-5-5
Signed-off-by: Michael Fritsche <frimi999@gmail.com>
* docs(ros2): use the surface vehicle setpoint type names of the interface lib
The pinned px4-ros2-interface-lib names the rover setpoint types
SurfaceVehicle*SetpointType. The table and the example reference still used
the old Rover*SetpointType class names, which do not exist in that version.
Assisted-by: Claude:claude-opus-5-5
Signed-off-by: Michael Fritsche <frimi999@gmail.com>
* feat(msg)!: rename surface vehicle throttle setpoint to thrust setpoint
The setpoint is a normalized force command along the body x and y axes,
which is a thrust, not a throttle. Throttle stays the name for the motor
command the actuator control derives from it.
surface_vehicle_throttle_setpoint is now surface_vehicle_thrust_setpoint
(SurfaceVehicleThrustSetpoint), and SetpointConfig
TYPE_SURFACE_VEHICLE_THROTTLE_* are now TYPE_SURFACE_VEHICLE_THRUST_*
(same values). The px4-ros2-interface-lib pin follows the matching rename
there.
Assisted-by: Claude:claude-opus-5-5
Signed-off-by: Michael Fritsche <frimi999@gmail.com>
* fix(tools): update px4-ros2-interface-lib pin
* fix(commander): do not enable velocity control for surface vehicle thrust setpoints
The SurfaceVehicleThrust* setpoint types enabled the velocity flag, taken
over from the original interface lib configuration. Nothing in these types
uses velocity, and offboard mode maps the same combinations without it.
The flag kept the rover speed controller running: switching from a
SurfaceVehicleSpeed* to a SurfaceVehicleThrust* type sets the same flags,
so the controllers were not reset and a stale speed setpoint kept
overriding the commanded thrust. It also made external modes that only
command thrust require a local position estimate.
Assisted-by: Claude:claude-opus-5-5
Signed-off-by: Michael Fritsche <frimi999@gmail.com>
* docs(msg): apply review suggestions for the surface vehicle setpoints
Add long descriptions to the thrust and speed setpoints and the speed
status, name modules instead of C++ classes, and use single spaces before
field comments. Rename the speed status PID integrals from pid_throttle_*
to pid_thrust_*, since the speed controller drives the thrust setpoint.
Update the docs and the rover control structure diagram for the thrust
setpoint and omnidirectional vehicles, note the Rover*SetpointType names of
PX4 v1.17 and v1.18, and add the ROS 2 release note.
Assisted-by: Claude:claude-opus-5-5
Signed-off-by: Michael Fritsche <frimi999@gmail.com>
---------
Signed-off-by: Michael Fritsche <frimi999@gmail.com>
Note: Some files are autogenerated and I did not yet
go through each source of generation to fix it there.
Instead I adjusted the filter to only exclude those
such that we can fix things in steps.
* Add vitepress tree
* Update existing workflows so they dont trigger on changes in the docs path
* Add nojekyll, package.json, LICENCE etc
* Add crowdin docs upload/download scripts
* Add docs flaw checker workflows
* Used docs prefix for docs workflows
* Crowdin obvious fixes
* ci: docs move to self hosted runner
runs on a beefy server for faster builds
Signed-off-by: Ramon Roche <mrpollo@gmail.com>
* ci: don't run build action for docs or ci changes
Signed-off-by: Ramon Roche <mrpollo@gmail.com>
* ci: update runners
Signed-off-by: Ramon Roche <mrpollo@gmail.com>
* Add docs/en
* Add docs assets and scripts
* Fix up editlinks to point to PX4 sources
* Download just the translations that are supported
* Add translation sources for zh, uk, ko
* Update latest tranlsation and uorb graphs
* update vitepress to latest
---------
Signed-off-by: Ramon Roche <mrpollo@gmail.com>
Co-authored-by: Ramon Roche <mrpollo@gmail.com>