* feat(gps): add u-blox u-center mode on UART2
GPS_UBX_BAUD2 alone never reached the receiver: outside the RTCM and GCS
modes the driver leaves UART2 untouched, so attaching a USB-serial adapter
to it produced no traffic. GPS_UBX_MODE 7 configures UART2 as a UBX
diagnostic port while the autopilot keeps its session on UART1.
* chore(gps): bump PX4-GPSDrivers submodule
Pulls in the u-center UART2 mode from PX4-GPSDrivers#228.
* docs(docs): prettier and cross link
* docs(docs): subedit
* chore(gps): bump PX4-GPSDrivers submodule
Picks up the info-level log for the u-center UART2 configuration, on top
of the CFG-UART1/2-ENABLED key ID fix now merged upstream.
* feat(gps): log what each UART carries after configuration
The line reported the link speed but not what the receiver was actually
configured to do with the port. Bumps PX4-GPSDrivers for the UART1 role
lookup and the matching per-port lines on UART2.
* feat(tools): add ubx_monitor.py, a live view of a u-blox serial link
Autobauds, then reports what the receiver is actually sending: link
utilisation, MON-VER identity, NAV-PVT fix state and per-message rates.
Written to check the u-center diagnostic port, useful for any GPS UART.
* chore(gps): point PX4-GPSDrivers at main
The u-center UART2 mode merged upstream (#228); track main instead of the
development branch.
---------
Co-authored-by: Hamish Willee <hamishwillee@gmail.com>