* fix(gz_bridge): support GPS failure injection
Modern Gazebo publishes sensor_gps directly from GZBridge, bypassing the shared failure-injection processing. Route each NavSat sample through process_gnss using the actual uORB publication instance so off, stuck, wrong, and recovery work for the addressed receiver.
Add functional regression coverage for the real GZBridge NavSat callback and sensor_gps publication path, plus recovery coverage for the shared GNSS processor.
Fixes#22296
Assisted-by: Codex:gpt-5
Signed-off-by: Saibernard Yogendran <bernie97@seas.upenn.edu>
* docs: gps failure injection is available on Gazebo
The gz_bridge now applies the shared GNSS failure state to the
simulator's NavSat data, so the table entry and the SIM_GZ_EN_GPS
workaround note are out of date.
Assisted-by: Claude:claude-fable-5
Signed-off-by: Saibernard Yogendran <bernie97@seas.upenn.edu>
---------
Signed-off-by: Saibernard Yogendran <bernie97@seas.upenn.edu>
* docs(ros2): reorder setup steps
- Use a standalone ROS 2 workspace for px4_msgs and
(optionally) the uXRCE-DDS Agent
- Build uXRCE-DDS Agent inside the ROS 2 workspace
- remove `px4_ros_com` package as mandatory package in the
workspace setup. Now it is just used in the examples.
Signed-off-by: Beniamino Pozzan <beniamino.pozzan@gmail.com>
* Apply suggestions from code review
Co-authored-by: Hamish Willee <hamishwillee@gmail.com>
* Apply suggestion from @hamishwillee
* docs(docs): fix up the links to broken anchors
---------
Signed-off-by: Beniamino Pozzan <beniamino.pozzan@gmail.com>
Co-authored-by: Hamish Willee <hamishwillee@gmail.com>
* feat(failure_injection): add ADS-B traffic-avoidance failure injection
Wire up FAILURE_UNIT_SYSTEM_TRAFFIC_AVOIDANCE (107) for the MAVLink-based
traffic avoidance path:
- OFF suppresses and STUCK freezes the incoming transponder_report, applied
both at the MAVLink ADS-B ingestion (handle_message_adsb_vehicle) and at
the navigator consumer (check_traffic), so it works for real ADS-B over
MAVLink, simulated ADS-B and the fake_traffic command.
- OFF additionally marks the ADS-B/FLARM heartbeat unhealthy so the traffic
avoidance system health check fails, using a message-less process()
overload.
- Add the unit to the capability catalogue (OK/OFF/STUCK), the failure
console command, the RC-switch unit selector and the docs.
The matching MAVLink FAILURE_UNIT enum entry lives in the mavlink submodule
(common.xml) and is handled by a separate PR; the uORB mirrors in
VehicleCommand.msg and FailureInjection.msg are included here.
* feat(failure_injection): enhance battery failure injection with severity levels
* feat(failure_injection): improve battery failure handling with dynamic threshold parameters
* refactor(failure_injection): remove traffic avoidance example from documentation
* docs(docs): subedit
* feat(failure_injection): add variance setting for distance sensor and integrate rangefinder in simulator
* feat(docs): add failure injection to release notes
* docs(docs): Add sim_mavlink back to heading
* fix(failure_injection): update default battery failure injection severity to Emergency
* docs(docs): get away from footnotes
* feat(failure_injection): enhance battery failure injection handling and update traffic unit support
* feat(failure_injection): add traffic avoidance handling tests and configurations
* [AUTO COMMIT] update EKF change indication
See .github/workflows/checks.yml for more details
* Apply suggestion from @hamishwillee
* feat(failure_injection): update failure types and handling for traffic avoidance and ESC telemetry
* fix(typo)
* [AUTO COMMIT] update EKF change indication
See .github/workflows/checks.yml for more details
* fix(docs): clarify notes on GPS and airspeed handling in failure injection documentation
---------
Co-authored-by: Claudio Chies <chiesc@chies.com>
Co-authored-by: Hamish Willee <hamishwillee@gmail.com>
* feat(failure_injection): integrate failure injection support across sensor drivers
* feat(failure_injection): enhance failure injection with RC switch support and instance bitmasking
feat(failure_injection): add disabled failure injection manager and system command support for v5x and v6x boards
* feat(failure_injection): add battery failure injection
Add a value-mutating apply-site for FAILURE_UNIT_SYSTEM_BATTERY. On an
injected OFF the outgoing battery_status is reported as a depleted pack
(zero remaining, emergency warning) so the low-battery failsafe triggers.
The apply-site lives in the shared Battery library, covering the analog
ADC, INA power monitors, ESC battery and SITL in one place, plus the
UAVCAN battery driver which publishes battery_status directly. The
previous SITL-only hack in BatterySimulator is removed in favour of this
shared path so simulation and hardware behave identically.
* fix(failure_injection): change parameter types from int32 to enum
* refactor(failure_injection): disable failure injection manager and system commands across multiple boards
* feat(failure_injection): enhance failure injection with timestamp handling and message-less support
* refactor(failure_injection): simplify has_timestamp_sample implementation and remove unused includes
* refactor(failure_injection):move conditional compilation into helper libary
* refactor(failure_injection): update CMakeLists to include failure_injection dependency across multiple drivers
---------
Co-authored-by: Claudio Chies <chiesc@chies.com>
* docs(docs): Add missing uorb topics sidebar
* docs(docs): discontinue cuav v5 plus/nano
* docs(docs): Fix 404 and 303 status HTTP links
* docs(docs): more link fixes
* update(drivers): Docs fix to fix up link
* docs(docs): Fix up all remaining broken links and add exclusions
* failure_injection: improve previously vague motor faulure
Reading it again I decided adding the sentance in 4d2170c13e is not clear enough.
* docs/safety: add a motor failure detection paragraph
The functionality is in my eyes pretty basic but so far completely undocumented so I went through the code and added a paragraph based on questions I received.
* Subedit
* Apply suggestion from @hamishwillee
---------
Co-authored-by: Hamish Willee <hamishwillee@gmail.com>
* Add vitepress tree
* Update existing workflows so they dont trigger on changes in the docs path
* Add nojekyll, package.json, LICENCE etc
* Add crowdin docs upload/download scripts
* Add docs flaw checker workflows
* Used docs prefix for docs workflows
* Crowdin obvious fixes
* ci: docs move to self hosted runner
runs on a beefy server for faster builds
Signed-off-by: Ramon Roche <mrpollo@gmail.com>
* ci: don't run build action for docs or ci changes
Signed-off-by: Ramon Roche <mrpollo@gmail.com>
* ci: update runners
Signed-off-by: Ramon Roche <mrpollo@gmail.com>
* Add docs/en
* Add docs assets and scripts
* Fix up editlinks to point to PX4 sources
* Download just the translations that are supported
* Add translation sources for zh, uk, ko
* Update latest tranlsation and uorb graphs
* update vitepress to latest
---------
Signed-off-by: Ramon Roche <mrpollo@gmail.com>
Co-authored-by: Ramon Roche <mrpollo@gmail.com>