Commit Graph
19 Commits
Author SHA1 Message Date
Claudio Chies e87918ea2b fix(failure_injection): keep failure names in sync with FailureInjection.msg (#28376)
unitName()/typeName() lacked the FAILURE_UNIT_DATALINK_*/FAILURE_UNIT_BUS_* units, so `failure can off` was announced as unit "unknown". FailureInjection.msg and VehicleCommand.msg also disagreed on FAILURE_TYPE_DRIFT (MAVLink FAILURE_TYPE 8).

Name every unit and type, add FAILURE_TYPE_DRIFT to both messages and the `failure` console command, and add a test that fails whenever a message constant has no name.
2026-09-07 09:16:38 -06:00
Claudio Chies 6bfe60507d feat(failure_injection): add CAN bus failure injection (#28140) 2026-08-25 10:33:52 +02:00
55bb872df1 feat(failure_injection): add ADS-B traffic failure injection and battery severity levels (#27950)
* feat(failure_injection): add ADS-B traffic-avoidance failure injection

Wire up FAILURE_UNIT_SYSTEM_TRAFFIC_AVOIDANCE (107) for the MAVLink-based
traffic avoidance path:

- OFF suppresses and STUCK freezes the incoming transponder_report, applied
  both at the MAVLink ADS-B ingestion (handle_message_adsb_vehicle) and at
  the navigator consumer (check_traffic), so it works for real ADS-B over
  MAVLink, simulated ADS-B and the fake_traffic command.
- OFF additionally marks the ADS-B/FLARM heartbeat unhealthy so the traffic
  avoidance system health check fails, using a message-less process()
  overload.
- Add the unit to the capability catalogue (OK/OFF/STUCK), the failure
  console command, the RC-switch unit selector and the docs.

The matching MAVLink FAILURE_UNIT enum entry lives in the mavlink submodule
(common.xml) and is handled by a separate PR; the uORB mirrors in
VehicleCommand.msg and FailureInjection.msg are included here.

* feat(failure_injection): enhance battery failure injection with severity levels

* feat(failure_injection): improve battery failure handling with dynamic threshold parameters

* refactor(failure_injection): remove traffic avoidance example from documentation

* docs(docs): subedit

* feat(failure_injection): add variance setting for distance sensor and integrate rangefinder in simulator

* feat(docs): add failure injection to release notes

* docs(docs): Add sim_mavlink back to heading

* fix(failure_injection): update default battery failure injection severity to Emergency

* docs(docs): get away from footnotes

* feat(failure_injection): enhance battery failure injection handling and update traffic unit support

* feat(failure_injection): add traffic avoidance handling tests and configurations

* [AUTO COMMIT] update EKF change indication

See .github/workflows/checks.yml for more details

* Apply suggestion from @hamishwillee

* feat(failure_injection): update failure types and handling for traffic avoidance and ESC telemetry

* fix(typo)

* [AUTO COMMIT] update EKF change indication

See .github/workflows/checks.yml for more details

* fix(docs): clarify notes on GPS and airspeed handling in failure injection documentation

---------

Co-authored-by: Claudio Chies <chiesc@chies.com>
Co-authored-by: Hamish Willee <hamishwillee@gmail.com>
2026-08-21 14:23:06 +02:00
Hamish Willee 3f9c6ec2c3 feat(mavlink): MAV_CMD_DO_SET_MISSION_CURRENT support (#28105) 2026-07-30 14:38:13 +10:00
Claudio ChiesandClaudio Chies d63f30c612 feat(failure_injection): Enable failure-injection on hardware, and through RC-switch (#27832)
* feat(failure_injection): integrate failure injection support across sensor drivers

* feat(failure_injection): enhance failure injection with RC switch support and instance bitmasking

feat(failure_injection): add disabled failure injection manager and system command support for v5x and v6x boards

* feat(failure_injection): add battery failure injection

Add a value-mutating apply-site for FAILURE_UNIT_SYSTEM_BATTERY. On an
injected OFF the outgoing battery_status is reported as a depleted pack
(zero remaining, emergency warning) so the low-battery failsafe triggers.

The apply-site lives in the shared Battery library, covering the analog
ADC, INA power monitors, ESC battery and SITL in one place, plus the
UAVCAN battery driver which publishes battery_status directly. The
previous SITL-only hack in BatterySimulator is removed in favour of this
shared path so simulation and hardware behave identically.

* fix(failure_injection): change parameter types from int32 to enum

* refactor(failure_injection): disable failure injection manager and system commands across multiple boards

* feat(failure_injection): enhance failure injection with timestamp handling and message-less support

* refactor(failure_injection): simplify has_timestamp_sample implementation and remove unused includes

* refactor(failure_injection):move conditional compilation into helper libary

* refactor(failure_injection): update CMakeLists to include failure_injection dependency across multiple drivers

---------

Co-authored-by: Claudio Chies <chiesc@chies.com>
2026-07-15 07:56:13 -07:00
Hamish Willee ad10373383 feat(mavlink): MAV_CMD_DO_SET_GLOBAL_ORIGIN added (#24697) 2026-07-02 10:08:52 +12:00
mahima-yoga 8b3ef1cf9e feat(navigator): add Guided Course mode for fixed-wing
Implements a new GUIDED_COURSE navigator mode that maintains a constant
ground-track bearing, altitude, and airspeed without manual stick input.
The mode is activated via MAVLink and accepts real-time in-flight updates:
  - MAV_CMD_GUIDED_CHANGE_HEADING (HEADING_TYPE_COURSE_OVER_GROUND): set course
  - MAV_CMD_DO_CHANGE_ALTITUDE: adjust target altitude
  - MAV_CMD_DO_CHANGE_SPEED: adjust target airspeed

On activation the vehicle captures its current velocity vector as the
initial course bearing. A valid horizontal velocity estimate (GPS or
dead-reckoning) is required; course commands are rejected if unavailable.
2026-05-27 10:51:55 +02:00
Balduin 84a287cd43 feat(msg): add VEHICLE_CMD_ACTUATOR_GROUP_TEST for actuator group testing
matching
 - https://github.com/mavlink/mavlink/pull/2224
 - https://github.com/mavlink/mavlink/pull/2476
2026-05-18 16:14:31 +02:00
Jacob Dahl 8bd42e728e feat(crsf_rc): add CRSF receiver bind command (#26790)
* feat(crsf_rc): add CRSF receiver bind command

Add ability to initiate CRSF receiver binding from QGroundControl or
the NSH console. When MAV_CMD_START_RX_PAIR is received with
RC_TYPE_CRSF, the driver sends the CRSF bind command frame over UART.

Binding is rejected when armed or on singlewire configurations.

Also adds RC_TYPE and RC_SUB_TYPE constants to VehicleCommand.msg and
replaces magic numbers in DsmRc and RCInput drivers.

Based on PX4/PX4-Autopilot#23294.

* style(crsf_rc): use C++ style comment

* style(crsf_rc): zero-init vcmd, remove noisy comments, drop unused enum value

* fix(rc): check write return value in BindCRSF, guard Spektrum bind against invalid sub-type

* fix(rc): warn and deny invalid Spektrum bind sub-type

Previously, an unrecognized param2 sub-type would silently leave
dsm_bind_pulses at 0 and return the generic UNSUPPORTED ACK. Add an
explicit else-branch that logs a PX4_WARN and returns DENIED so users
get clear feedback in QGC.
2026-05-15 19:42:53 -06:00
Marco Hauswirth 6306c78f79 feat(ekf2): EKF2_SENS_EN param, SensEnBit enum, MAVLink fusion command
Add EKF2_SENS_EN bitmask parameter (replaces EKF2_EN_BOOT) with
per-sensor enable bits. initFusionControl reads SENS_EN while disarmed.
handleSensorFusionCommand sets FusionSensor.enabled via
VEHICLE_CMD_ESTIMATOR_SENSOR_ENABLE. syncSensEnParam writes back to
param on disarm. Update EstimatorFusionControl.msg to bool
intended/active fields. Update VehicleCommand.msg FUSION_SOURCE enum.
2026-04-02 16:20:19 +02:00
Marco Hauswirth 0dd1640a54 feat(ekf2): enable fusion-ctrl toggle over mavlink cmd, CTRL param act only as reference 2026-04-02 16:20:19 +02:00
Jacob Dahl f00e46f618 feat(dshot): Extended Telemetry and EEPROM support
Overhauls the DShot driver with per-timer BDShot selection, multi-timer                                                                                                                                  
sequential capture, Extended DShot Telemetry (EDT), and AM32 ESC EEPROM                                                                                                                                  
read/write via MAVLink. Expands ESC support from 8 to 12 channels.                                                                                                                                       
                                                                                                                                                                                                   
BDShot:                                                                                                                                                                                                  
- Per-timer BDShot protocol selection via actuator config UI                                                                                                                                             
- Multi-timer sequential burst/capture on any DMA-capable timer                                                                                                                                          
- Adaptive per-channel GCR bitstream decoding                                                                                                                                                            
- Per-channel online/offline detection with hysteresis                                                                                                                                                   
                                                                                                                                                                                                   
Extended DShot Telemetry (EDT):                                                                                                                                                                          
- Temperature, voltage, current from BDShot frames (no serial wire)                                                                                                                                      
- New DSHOT_BIDIR_EDT parameter                                                                                                                                     
- EDT data merged with serial telemetry when both available                                                                                                                                              
                                                                                                                                                                                                   
AM32 EEPROM:                                                                                                                                                                                             
- Read/write AM32 ESC settings via MAVLink ESC_EEPROM message                                                                                                                                            
- ESCSettingsInterface abstraction for future ESC firmware types                                                                                                                                         
- New DSHOT_ESC_TYPE parameter                                                                                                                                                                           
                                                                                                                                                                                                   
Other changes:                                                                                                                                                                                           
- Per-motor pole count params DSHOT_MOT_POL1–12 (replaces MOT_POLE_COUNT)                                                                                                                              
- EscStatus/EscReport expanded to 12 ESCs with uint16 bitmasks                                                                                                                                           
- Numerous bounds-check, overflow, and concurrency fixes                                                                                                                                                 
- Updated DShot documentation
2026-03-17 16:38:33 -08:00
Brandon W. Banks 1345b3500a Vehicle command for Prearm Safety button (#26079)
* added vehicle command and support to remotely activate/deactivate the safety system (#26078)

* added print_status support for prearm safety status

* updated safety button to map to MAV_CMD_DO_SET_SAFETY_SWITCH_STATE = '5300'

* safety switch cmd: fixed incorrect catch-all and added commanded_state variable for easier reading
2025-12-15 11:25:32 -09:00
mahima-yoga ca83b8330d autotune: enable autotune in mission mode
When operating fully autonomously (i.e., without manual control or a guaranteed link to the ground station), tuning a vehicle can be difficult since the current autotune process requires either RC input or a GCS command. For these scenarios, it it useful to be able to start autotune inside a mission.
2025-12-05 14:03:10 +01:00
Jacopo Panerati 6901bc6a01 VTOL Takeoff: Use VehicleCommand specified heading for VTOL transition (#24040)
* Use VehicleCommand heading for VTOL transition

* options for param2 of vehicle_cmd_nav_vtol_takeoff
2025-11-25 09:46:48 +01:00
bresch 82308da18d ekf2: support heading external update from MAV_CMD_EXTERNAL_ATTITUDE_ESTIMATE 2025-09-18 17:00:16 +02:00
Hamish Willee b4b3c2a4a1 VehicleCommand.msg - update to new docs standards (#24855) 2025-05-24 16:03:04 +10:00
Hamish Willee 9cf3e83197 VehicleCommand.msg - takeoff & global position (#24574)
* VehicleCommand.msg - takeoff & global position

* Apply suggestions from code review

* Update msg/versioned/VehicleCommand.msg

* Update msg/versioned/VehicleCommand.msg

* Update msg/versioned/VehicleCommand.msg

* Update msg/versioned/VehicleCommand.msg

* Update msg/versioned/VehicleCommand.msg

* Update msg/versioned/VehicleCommand.msg
2025-05-01 18:37:46 +10:00
GuillaumeLaine 4fe7d713d3 msg: introduce message versioning 2024-12-13 16:34:37 +01:00