Plan RTL paths that route around geofence boundaries — both inclusion
and exclusion zones — instead of flying straight through them and
breaching. The planner builds a visibility graph over the margin-inflated
geofence polygons and circles and runs Dijkstra to find the shortest
legal return path, falling back to a straight line to the destination
when no valid path exists.
Highlights:
- New reusable libraries: src/lib/dijkstra (generic shortest path) and
src/lib/geofence (fixed-point geometry, polygon inflation, bitangent
visibility); the RTL planner lives in navigator/RTLPlanner.
- Visibility graph keeps only bitangent edges and skips edges that poke
into a forbidden region, greatly reducing edge-cost computation.
- Corner splitting is limited to sharp convex corners.
- Geometry validation: reject self-intersecting polygons and vertices
outside the fixed-point range; centimeter fixed-point scaling keeps
orientation tests exact and avoids drift at large distances.
- Failure handling: a Status enum replaces silent bool returns, and
failures (unbuildable fence, planner capacity overflow, dataman load
errors, NaN waypoints, destinations that breach the fence) are
surfaced to the operator via MAVLink warnings/criticals; the planner
falls back to a straight-line RTL.
- Destination updates are centralized in RTL::setRtlTypeAndDestination;
the path is replanned only when the destination or geometry changes.
- VTOLs always use the fixed-wing margin (FW loiter radius).
- kMaxNodes is exposed as a Kconfig option (default 100); the feature is
disabled on flash-constrained boards (FMUv4 and older, various F4/F7).
- Tests: unit tests for the Dijkstra lib, geofence geometry utils, and
the avoidance planner, plus a MAVSDK SITL test flying an RTL through a
geofence.
- Documentation: new "Geofence Awareness" section in the RTL docs.
Co-authored-by: Balduin <balduin@auterion.com>
Disable EKF2 fusion features with no corresponding hardware:
- px4_fmu-v2: optical flow, range finder (~17 KB saved)
- mamba-f405-mk2: optical flow, range finder, external vision,
aux global position, aux velocity, baro compensation,
drag fusion (~42 KB saved)
Having a generic interface over the GPS drivers makes dedicated
functionality for each driver harder. Move the Septentrio driver into
its own module under the `gnss` driver directory, and let it have its
own parameters for only the functionality it requires. This also helps
with adding new features because they only need to be implemented for
the driver that wants it, simplifying testing.
* usb: Added parameter to enable always starting mavlink on USB.
Refactored cdcacm_init into a module and added a paramter to allow always starting mavlink on
USB, also added a paramter to choose the mode. The current default behavior is to wait and listen
for data on USB and auto-detect the protocol (mavlink, nsh, ublox). This results in the mavlink
stream not starting until something else on the mavlink network sends a packet first. The new
default behavior is to always start mavlink.
Added parameters
MAV_USB_ENABLE -- default 1 (always start mavlink on USB)
MAV_USE_MODE -- default 3 (onboard)
* added 3 retries for opening serial port in mavlink, removed sleep before sercon
* added DRIVERS_CDCACM_AUTOSTART to ark-v6x default.px4board
* added CONFIG_DRIVERS_CDCACM_AUTOSTART=y to default.px4board for boards with CONFIG_CDCACM in their nsh/defconfig
* format
* remove PGA460 from COMMON_DISTANCE_SENSOR to save flash
* remove LIS2MDL from COMMON_MAGNETOMETER to save flash
* disable CONFIG_DRIVERS_CDCACM_AUTOSTART for fmu-v5 protected.px4board
* moved and renamed parameters, removed mode logic in mavlink
* changed parameter names, added mode none
* remove parameters from mavlink
- cmake NuttX build wrapper compile in place instead of copying source tree to build directory
- slightly faster skipping necessary copying (depending on system)
- allows debugging in place
- easier to work directly in NuttX following official documentation
- simplifies overall build which should make it easier to resolve any remaining NuttX dependency issues in the build system
- the downside is switching back and forth between different builds always require rebuilding NuttX, but I think this is worth the improved developer experience
- also no longer builds px4io and bootloader in every single build, for most users these rarely change and we're wasting a lot of build time
