* docs(parameters): add 4 new units
- A/V (ampere per volt)
- Pa (pascal)
- Pa/V (pascal per volt)
- MHz (megahertz)
* docs(parameters): add missing units
These parameters have a physical unit (often stated in their own
description) but no unit field, so QGC and the parameter reference show
them as unitless.
Add the missing units to 116 parameters.
Assisted-by: Claude:claude-opus-5-5
* docs(parameters): drop units from descriptions now in the unit field
Assisted-by: Claude:claude-opus-5-5
* fix(microstrain): label orientation parameters deg
src/drivers/ins/microstrain/MicroStrain.cpp requires these to be in
degrees (they are converted to radians at line 1121-1124), but the param
docstring mentioned which was moved to the unit field just before.
Fix by labelling correctly as degrees.
Signed-off-by: Balduin <balduin@auterion.com>
* docs(parameters): fix smaller inconsistencies
Address review from @dakejahl:
- mc_nn_control: MC_NN_MIN_RPM also in units of rpm
- sensors: remove redundant '#unit: Pa' comment
- microstrain: Typo in MS_GNSS_OFF2_Z
Signed-off-by: Balduin <balduin@auterion.com>
---------
Signed-off-by: Balduin <balduin@auterion.com>
RC*_REV parameters are binary toggles (-1 or 1) immediately converted
to bool. Using int32 allows reverting the module schema enum key type
from number back to integer, keeping validation strict.
All parameters are now defined in YAML module configuration files.
Remove the cmake infrastructure that discovered and processed
legacy params.c files:
- Remove GLOB_RECURSE for *params.c/*parameters.c
- Remove .c file scanning from DISABLE_PARAMS_MODULE_SCOPING
- Remove module_list from px_process_params.py --src-path
- Remove PX4_MODULE_PATHS usage (no longer needed for param scanning)
Add PWM_*_CENTERx for each servo.
Use a bilinear transform to map actuator_servos to PWM signals.
This solution only works for PWM based servos. Other types of servos are not affected.
* PWM: Add servo trim option
* PWM: Improve documentation of PWM trim feature
* PWM: cleaner clamping and docs typo
* update documentation & safety
* add migration formula
* rename param from trim to center
* docs with center instead of trim
* move clamping and reorder values
* improve documentation
* adress failing range check
* improve documentation
* CA: add event for setting CENTER with TRIM
Signed-off-by: Silvan <silvan@auterion.com>
---------
Signed-off-by: Silvan <silvan@auterion.com>
Co-authored-by: Silvan <silvan@auterion.com>
goto control class handles smoothing of goto setpoints, outputs trajectory setpoint for mc pos control
some minor encapsulation done in mc pos control for readability
new param MPC_YAWAAUTO_MAX limiting heading accelerations in heading smoother
* created a Performance Model for fixed wing vehicle
- added compensation for maximum climbrate, minimum sinkrate, minimum airspeed and trim airspeed based on weight ratio and air density
- added atmosphere lib to standard atmosphere calculations
---------
Signed-off-by: RomanBapst <bapstroman@gmail.com>
Co-authored-by: Thomas Stastny <thomas.stastny@auterion.com>
and remove the possibility to set min > max to reverse.
Initially the idea was to add the checkbox on the UI side, to avoid adding
another param, but I don't think I'll go through the extra effort on the
QGC side.