* fix(drivers/uavcannode): make CANNODE_NODE_ID the sole node ID policy
The startup bootloader_app_shared_write() never reached the bootloader:
it only accepts App-signed data and invalidates the shared region on
every boot. The only consumer was uavcannode itself on a restart
without a reset (nsh stop/start), where the persisted bus_speed=0 made
the CAN driver init fail and left the node off the bus. The bootloader
learns our node ID exclusively through the firmware update handoff in
cb_beginfirmware_update, which already carries the static ID.
CANNODE_NODE_ID now overrides the bootloader handoff only when nonzero,
so the default (0) reuses the ID the bootloader already allocated
instead of running allocation a second time. The handoff is ignored
unless it carries a valid bitrate, healing regions poisoned by firmware
that wrote bus_speed=0. Max is 125 because 126/127 are reserved for
debug tools by DroneCAN convention, matching UAVCAN_NODE_ID.
Signed-off-by: Jacob Dahl <dahl.jakejacob@gmail.com>
* fix(drivers/uavcannode): harden bootloader handoff validation
Invalidate the shared region whenever it was read valid, not only when
the handoff is accepted, so stale data cannot linger on boards whose
bootloader never invalidates it. Require a plausible bitrate (the
CANNODE_BITRATE minimum) rather than nonzero: the canbootloader alt-app
update path can hand off bus_speed = CAN_UNDEFINED (999). Reword the
invalid-param error, which claimed dynamic allocation while keeping the
bootloader handoff.
Signed-off-by: Jacob Dahl <dahl.jakejacob@gmail.com>
---------
Signed-off-by: Jacob Dahl <dahl.jakejacob@gmail.com>
* sensors: move GPS antenna offsets to per-receiver parameters
Move antenna position configuration from the single EKF2_GPS_POS_X/Y/Z
parameter set into per-receiver SENS_GPS{0,1}_OFF{X,Y,Z} parameters in
the sensors module. Each offset slot is matched to a physical receiver
by device ID (SENS_GPS{0,1}_ID), falling back to uORB instance index
when no IDs are configured.
The antenna offset is now carried through the SensorGps uORB message
and blended alongside other GPS states when multi-receiver blending is
active, so EKF2 receives the correct lever arm for whichever receiver
(or weighted combination) is selected.
- Add antenna_offset_{x,y,z} fields to SensorGps.msg
- Remove EKF2_GPS_POS_X/Y/Z params; EKF2 reads offset from gnssSample
- Add SENS_GPS{0,1}_ID and SENS_GPS{0,1}_OFF{X,Y,Z} params (module.yaml)
- Blend antenna offsets in GpsBlending (weighted average)
- Add unit tests for single, blended, and failover antenna offset cases
- Migrate params.c to module.yaml for the vehicle_gps_position module
* sensors: gps_blending: add asymmetric weight and fallthrough offset tests
Add two additional antenna offset test cases:
- dualReceiverAsymmetricWeightAntennaOffset: verify that unequal eph
values produce correctly skewed blend weights (0.8/0.2) and that the
output antenna offset reflects the weighted average
- blendingFallthroughAntennaOffset: verify that when blending is enabled
but can_do_blending evaluates false (eph=0), the non-blending path
correctly assigns the selected receiver's antenna offset
* feat(param_translation): translate EKF2_GPS_POS_ to SENS_GPS0_OFF_
* fix(msgs): proper formatting
* chore(msg): 0 if invalid/unknown
* fix(ROMFS): migrate EKF2_GPS_POS_ params
* fix(docs): migrate EKF2_GPS_POS_ params
* fix(blending): unsigned param
* Update msg/SensorGps.msg
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* fix(sensors/gps): remove 'values:' tag in module.yaml
* fix(sensors/gps): unsigned instance index
* fix(blending): restore const on gps_blend_states()
Move antenna offset blending into blend_gps_data() where the
weights are computed, keeping gps_blend_states() const.
* fix(sensors/gps): fix msg annotation and restore SENS_GPS_PRIME values
Remove incorrect @invalid NaN annotation from antenna offset fields
(0.0 default is correct, not a sentinel). Restore values tag for
SENS_GPS_PRIME so QGC shows a dropdown.
* fix(gps_blending): fix pre-existing bug to clear _gps_updated flags
The loop iterates over i but always clears gps_select_index. The intent is to clear
all updated flags, but only the selected one gets cleared (N times)
* test(gps_blending): add stale update flag regression test
* feat: implement UAVCAN LED control for individual light control and assignment
* uavcan led: nit-picks from review
* uavcan led: reduce maximum number of lights
to avoid unused parameters
* uavcan led: simplify anticolision on check
* uavcan led: correctly map 8-bit RGB to rgb565
* Trim param name character arrays to 17
16 characters + \0 termination
* uavcan led: final nit-picks
---------
Co-authored-by: Matthias Grob <maetugr@gmail.com>
* dronecan: esc: change UAVCAN_ESC_IFACE to 2 to default to only outputting on CAN2
* revert param default and update docs
* Subedit
---------
Co-authored-by: Hamish Willee <hamishwillee@gmail.com>
* Remove Zubax Orel - not available and no other presence
* Fix up zubax product links
* Snapdragon flight - delete as no longer relevant hardware
* Delete intel aero docs
* Brushless whoop - remove docs except for link to old version
* Many link fixes
* Add vitepress tree
* Update existing workflows so they dont trigger on changes in the docs path
* Add nojekyll, package.json, LICENCE etc
* Add crowdin docs upload/download scripts
* Add docs flaw checker workflows
* Used docs prefix for docs workflows
* Crowdin obvious fixes
* ci: docs move to self hosted runner
runs on a beefy server for faster builds
Signed-off-by: Ramon Roche <mrpollo@gmail.com>
* ci: don't run build action for docs or ci changes
Signed-off-by: Ramon Roche <mrpollo@gmail.com>
* ci: update runners
Signed-off-by: Ramon Roche <mrpollo@gmail.com>
* Add docs/en
* Add docs assets and scripts
* Fix up editlinks to point to PX4 sources
* Download just the translations that are supported
* Add translation sources for zh, uk, ko
* Update latest tranlsation and uorb graphs
* update vitepress to latest
---------
Signed-off-by: Ramon Roche <mrpollo@gmail.com>
Co-authored-by: Ramon Roche <mrpollo@gmail.com>
