14 Commits
Author SHA1 Message Date
zdeno-sekerakandHamish Willee d92b05ec73 docs(config): add Integrated GCS page (#29253)
* docs: add Integrated GCS page

* docs(config): fix review findings on Integrated GCS page

Integrated GCS units send manual control to PX4 either as MAVLink over
telemetry or as an RC signal (e.g. Herelink's S.Bus air unit output), so
the tip now covers both paths rather than pointing only to Joystick Setup.

Also lead the intro with the main benefit (manual and GCS control in one
unit), apply style-guide fixes, link the page from Manual Control, rename
the WebP images that had a .png extension, and compress the SRoC image.

Assisted-by: Claude:claude-opus-5-5
Signed-off-by: Hamish Willee <hamishwillee@gmail.com>

* Deleted unnescessary Aeronav Image: docs/assets/peripherals/integrated_gcs/uxv_technologies_aeronav.webp

* Delete unnescessary Micronav image: docs/assets/peripherals/integrated_gcs/uxv_technologies_micronav.webp

* docs(config): add PX4 configuration section to Integrated GCS page

The page listed devices but never said how to set PX4 up for one.
Configuration depends on whether the unit sends manual control as MAVLink
or as an RC signal, and with MAVLink control a single link loss triggers
both the manual control and data link loss failsafes, so the new section
covers manual control, telemetry, failsafes, arming and video for both.

Also crop the G2Nav image, drop the Alpha G-Case Duo at the author's
suggestion, and link the page from the config index, Joystick Setup,
Basic Concepts and the RC receiver list.

Assisted-by: Claude:claude-opus-5-5
Signed-off-by: Hamish Willee <hamishwillee@gmail.com>

---------

Signed-off-by: Hamish Willee <hamishwillee@gmail.com>
Co-authored-by: Hamish Willee <hamishwillee@gmail.com>
2026-10-29 14:06:40 +11:00
ac97d5263a feat(commander)!: Replace CBRK_IO_SAFETY with COM_SAFETY_MODE for more options (#28744)
* feat(commander): only report safety button as available when it is available and configured to be used via COM_PREARM_MODE

* feat(commander): add a new option to COM_PREARM_MODE to explicitly and exclusively allow prearming via VEHICLE_CMD_DO_SET_SAFETY_SWITCH_STATE

* feat(commander): explicit dedicated safety-button-only and mavlink-only prearm modes

* fix(commander): also accept VEHICLE_CMD_DO_SET_SAFETY_SWITCH_STATE on Always and Disarmed pre-arm profiles to match documentation

* docs(prearm): update docs with new prearm mode behaviour

* fix(commander): fix syntax for bool

* docs(prearm): revert last param table, as COM_FORCE_SAFETY is already mentioned in a table above.

* docs(prearm): fix MAVLink spelling, grammar and parameter table

Make the pre-arm docs consistent with the COM_PREARM_MODE parameter and
the docs style guide: MAVLink is spelled consistently (page and option
labels), selectable option names are shown in code style, the parameter
table lists all five COM_PREARM_MODE options with the correct default,
and sentences are fixed and put one per line.

Question for the author: the COM_PREARM_MODE option labels say "Safety
button", while the docs say "safety switch". Are these synonyms? If so,
which term should we use in both places? If not, what is the difference?

Assisted-by: Claude:claude-opus-5-5
Signed-off-by: Hamish Willee <hamishwillee@gmail.com>

* fix(commander): clean up _button_disabled logic: button still needs to be enabled in Disabled and Always prearmed modes to switch safety off.

* docs(prearm): adjust COM_PREARM_MODE description and clarify/fix/improve prearm docs

* chore(VehicleCommand.msg): improved comments

* chore(msg): v0->v1 translation for VehicleCommand.msg

* Revert "chore(msg): v0->v1 translation for VehicleCommand.msg"

This reverts commit 50ea14fc76310ba7b53ebcd1c6ee8cf4e1c0776b.

* feat(commander): deny VEHICLE_CMD_DO_SET_SAFETY_SWITCH_STATE when not accepted

* feat(commander): COM_SAFETY_MODE replaces CBRK_IO_SAFETY

* docs(prearm): update docs with new COM_SAFETY_MODE behaviour

* docs(prearm): minor cleanup

* fix(commander): migrate CBRK_IO_SAFETY and correct safety ACKs

A stored CBRK_IO_SAFETY=0 was dropped on import, so upgraded vehicles booted with COM_SAFETY_MODE=0 and safety off. The CAN GPS nodes have no commander, so setting COM_SAFETY_MODE there only logged an error at boot. A SAFETY_SAFE command in mode 0 and ESC calibration with safety on were ACKed ACCEPTED while doing nothing.

Assisted-by: Claude:claude-opus-5-5

---------

Signed-off-by: Hamish Willee <hamishwillee@gmail.com>
Co-authored-by: Hamish Willee <hamishwillee@gmail.com>
Co-authored-by: Jacob Dahl <dahl.jakejacob@gmail.com>
2026-10-06 17:35:07 -06:00
Hamish Willee 96e760a782 docs(docs): Fix almost all broken external links (#27790)
* docs(docs): Add missing uorb topics sidebar
* docs(docs): discontinue cuav v5 plus/nano
* docs(docs): Fix 404 and 303 status HTTP links
* docs(docs): more link fixes
* update(drivers): Docs fix to fix up link
* docs(docs): Fix up all remaining  broken links and add exclusions
2026-07-02 16:58:40 +10:00
Hamish Willee 209c971c1b docs: Link fixes in docs - including 404 fixes (#26605)
* Redirect 301/308 HTTP link fixes
* Easy 404 fixes - easy
* Add internal anchor fixes and generate msg docs fix
2026-02-28 17:09:53 +11:00
Hamish Willee 4226b7d4ec docs: Manual control updates to reflect prioritised selection (#25835) 2026-02-25 10:43:19 +11:00
PX4BuildBot 36b5e1e1bb docs: auto-sync metadata [skip ci]
Co-Authored-By: PX4 BuildBot <bot@px4.io>
2026-02-11 22:43:01 +00:00
Hamish Willee 8e0f223b3a Link fixes and removal of dead docs (#25239)
* Remove Zubax Orel - not available and no other presence

* Fix up zubax product links

* Snapdragon flight - delete as no longer relevant hardware

* Delete intel aero docs

* Brushless whoop - remove docs except for link to old version

* Many link fixes
2025-07-17 15:30:56 +10:00
Hamish Willee 5d5e23bcfa [Docs] Fix links and tidy config (#25184)
* Fix links and tidy config

* Add updated lock files
2025-07-10 16:11:58 +10:00
Hamish Willee 2c31e2bad5 Fix all possible HTTP to HTTPS docs links (#25153) 2025-07-03 18:09:58 +10:00
Hamish Willee 375f421c61 Link fixes galore (#25151) 2025-07-03 14:53:12 +10:00
Matthias Grob 2bc04f91f8 docs: fix all end of file newlines
Note: Some files are autogenerated and I did not yet
go through each source of generation to fix it there.
Instead I adjusted the filter to only exclude those
such that we can fix things in steps.
2025-06-26 11:03:23 -07:00
Hamish Willee 3a54b482d2 Fix up cross links 2025-06-25 13:03:46 +10:00
Patrik Dominik PordiandHamish Willee 03345db36e Added Flight REview for Encrypted logs (#24690)
* Added Flight REview for Encrypted logs

* Subedit

---------

Co-authored-by: Hamish Willee <hamishwillee@gmail.com>
2025-04-09 10:37:14 +10:00
Hamish WilleeandRamon Roche 88d623bedb Move PX4 Guide source into /docs (#24490)
* Add vitepress tree

* Update existing workflows so they dont trigger on changes in the docs path

* Add nojekyll, package.json, LICENCE etc

* Add crowdin docs upload/download scripts

* Add docs flaw checker workflows

* Used docs prefix for docs workflows

* Crowdin obvious fixes

* ci: docs move to self hosted runner

runs on a beefy server for faster builds

Signed-off-by: Ramon Roche <mrpollo@gmail.com>

* ci: don't run build action for docs or ci changes

Signed-off-by: Ramon Roche <mrpollo@gmail.com>

* ci: update runners

Signed-off-by: Ramon Roche <mrpollo@gmail.com>

* Add docs/en

* Add docs assets and scripts

* Fix up editlinks to point to PX4 sources

* Download just the translations that are supported

* Add translation sources for zh, uk, ko

* Update latest tranlsation and uorb graphs

* update vitepress to latest

---------

Signed-off-by: Ramon Roche <mrpollo@gmail.com>
Co-authored-by: Ramon Roche <mrpollo@gmail.com>
2025-03-13 16:08:27 +11:00