19 Commits
Author SHA1 Message Date
Matthias Grob b5e65cfbfd feat(airframes): keep the tilt failure check enabled on the omnicopter
The tilt check compares against the attitude setpoint, which the
omnicopter publishes and tracks at any orientation, including upside
down. Disabling the check is no longer needed for it to fly.
2026-11-18 11:02:27 +01:00
Matthias Grob fa877566a4 feat(failure_detector)!: rename the tilt parameters to FD_TILT_ERROR
The tilt check limits the error from the attitude setpoint, which the
FD_FAIL_R name no longer describes. FD_FAIL_R becomes FD_TILT_ERROR,
now a float, and FD_FAIL_R_TTRI becomes FD_TILT_ERROR_T.

The old roll and pitch limits and trigger times meant something else,
so they start at the new defaults instead of being taken over. Only a
check disabled for both roll and pitch stays disabled, as -1.
2026-11-18 11:02:27 +01:00
Matthias Grob 7f83c28400 feat(failure_detector)!: check tilt instead of roll and pitch separately
Checking roll and pitch against separate limits misses a combined
tilt: 45° roll with 45° pitch is a 60° tilt but stays below both
default 60° limits. Euler angles are also unreliable near 90° pitch
and when inverted.

FD_FAIL_R and FD_FAIL_R_TTRI now set the maximum tilt and its trigger
time. FD_FAIL_P and FD_FAIL_P_TTRI are removed without migration
(see the Upgrade Guide). The check is disabled with -1; 0 still
disables it for existing setups. In FailureDetectorStatus, fd_roll
and fd_pitch are replaced by fd_tilt.
2026-11-18 11:02:27 +01:00
Hamish Willee f68a3af4b6 docs(docs): tidy orphans etc (#28113) 2026-07-31 08:55:09 +10:00
Ramon Roche 2f459921f6 docs: add official PX4 developer kits and manufacturer program
Document the Official PX4 Developer Kit program: a new top-level
Developer Kits section listing the certified kits (ModalAI Starling 2
Max, DroneBlocks DEXI 5, Holybro X500 v2), a new DEXI 5 page, and a
manufacturer-facing page describing the program requirements, benefits,
and eligibility.

Restructure the hardware navigation so all certified kits live in one
place instead of being split across Complete Vehicles and Kits, drop
discontinued build guides from the sidebar (still linked from the kit
build guides page), and group the manufacturer guides under a new
Manufacturers section in Development > Hardware.

Signed-off-by: Ramon Roche <mrpollo@gmail.com>
2026-07-02 12:15:03 -07:00
Hamish Willee 96e760a782 docs(docs): Fix almost all broken external links (#27790)
* docs(docs): Add missing uorb topics sidebar
* docs(docs): discontinue cuav v5 plus/nano
* docs(docs): Fix 404 and 303 status HTTP links
* docs(docs): more link fixes
* update(drivers): Docs fix to fix up link
* docs(docs): Fix up all remaining  broken links and add exclusions
2026-07-02 16:58:40 +10:00
Hamish Willee 323c623e34 docs(docs):Fixes that prettier does not handle well (#27212) 2026-04-26 14:30:02 +10:00
Hamish Willee 57cf570bb4 fix(docs): Fix internal docs links (#26718) 2026-03-12 14:29:35 +11:00
Hamish Willee b37733459d docs: Codespell check on English sources + swd fixes (#26657) 2026-03-05 12:50:59 +11:00
Peter C.andHamish Willee c7aaacc8b4 docs: Add Holybro X650 to the multicopter frame kit list (#26585)
Co-authored-by: Hamish Willee <hamishwillee@gmail.com>
2026-03-04 15:18:49 +11:00
Hamish Willee 2fd131d3cf Link fixes 4 (#26633)
* Airframe - replace Babyshark with QAV250

* Link fixes
2026-03-04 09:45:50 +11:00
Hamish Willee 209c971c1b docs: Link fixes in docs - including 404 fixes (#26605)
* Redirect 301/308 HTTP link fixes
* Easy 404 fixes - easy
* Add internal anchor fixes and generate msg docs fix
2026-02-28 17:09:53 +11:00
Hamish Willee c0af8b9952 docs: Link fixes such as 301 redirects (#26586) 2026-02-26 18:33:37 +11:00
Hamish Willee 539b1def78 docs: Numerous spelling and grammer fixes in flight controller section (#26582) 2026-02-26 11:53:44 +11:00
Hamish Willee 8e0f223b3a Link fixes and removal of dead docs (#25239)
* Remove Zubax Orel - not available and no other presence

* Fix up zubax product links

* Snapdragon flight - delete as no longer relevant hardware

* Delete intel aero docs

* Brushless whoop - remove docs except for link to old version

* Many link fixes
2025-07-17 15:30:56 +10:00
Hamish Willee 5d5e23bcfa [Docs] Fix links and tidy config (#25184)
* Fix links and tidy config

* Add updated lock files
2025-07-10 16:11:58 +10:00
Hamish Willee 375f421c61 Link fixes galore (#25151) 2025-07-03 14:53:12 +10:00
Matthias Grob 2bc04f91f8 docs: fix all end of file newlines
Note: Some files are autogenerated and I did not yet
go through each source of generation to fix it there.
Instead I adjusted the filter to only exclude those
such that we can fix things in steps.
2025-06-26 11:03:23 -07:00
Hamish WilleeandRamon Roche 88d623bedb Move PX4 Guide source into /docs (#24490)
* Add vitepress tree

* Update existing workflows so they dont trigger on changes in the docs path

* Add nojekyll, package.json, LICENCE etc

* Add crowdin docs upload/download scripts

* Add docs flaw checker workflows

* Used docs prefix for docs workflows

* Crowdin obvious fixes

* ci: docs move to self hosted runner

runs on a beefy server for faster builds

Signed-off-by: Ramon Roche <mrpollo@gmail.com>

* ci: don't run build action for docs or ci changes

Signed-off-by: Ramon Roche <mrpollo@gmail.com>

* ci: update runners

Signed-off-by: Ramon Roche <mrpollo@gmail.com>

* Add docs/en

* Add docs assets and scripts

* Fix up editlinks to point to PX4 sources

* Download just the translations that are supported

* Add translation sources for zh, uk, ko

* Update latest tranlsation and uorb graphs

* update vitepress to latest

---------

Signed-off-by: Ramon Roche <mrpollo@gmail.com>
Co-authored-by: Ramon Roche <mrpollo@gmail.com>
2025-03-13 16:08:27 +11:00