mirror of
https://github.com/PX4/PX4-Autopilot.git
synced 2026-11-22 14:19:57 +08:00
docs(boards/nxp_mr-tropic): Add docs for NXP MR-VMU-TROPIC (#29602)
This commit is contained in:
1 parent
3de5e83add
commit
0e0f3ce8a2
6 files changed
+295
No files matched your search
Binary file not shown.
|
After Width: | Height: | Size: 141 KiB |
@@ -0,0 +1 @@
|
||||
<svg xmlns="http://www.w3.org/2000/svg" width="880" height="891" viewBox="0 0 1283 1299" data-theme="light" data-conn="overview"><rect width="1283" height="1299" rx="10" fill="#ffffff" stroke="#d0d7de"/><image x="40" y="118" width="1064" height="1075" href="data:image/jpeg;base64,/9j/4AAQSkZJRgABAQAAAQABAAD/2wBDAAYEBQYFBAYGBQYHBwYIChAKCgkJChQODwwQFxQYGBcUFhYaHSUfGhsjHBYWICwgIyYnKSopGR8tMC0oMCUoKSj/2wBDAQcHBwoIChMKChMoGhYaKCgoKCgoKCgoKCgoKCgoKCgoKCgoKCgoKCgoKCgoKCgoKCgoKCgoKCgoKCgoKCgoKCj/wAARCAQzBCgDASIAAhEBAxEB/8QAHQAAAQQDAQEAAAAAAAAAAAAAAAMFBgcCBAgBCf/EAFkQAAEDAwMCAwUEBggBCQQFDQECAwQABREGEiEHMRNBURQiYXGBCDKRoRUjQrHB0RYXJDNSYuHwciU0U4KSorLS8UNjc4MYJjU2RFRVk8JFdJQnKDdko2X/xAAaAQEBAQEBAQEAAAAAAAAAAAAAAQIDBAUG/8QAKhEBAQACAgICAgMAAgMBAQEAAAECESExAxIEQRNRIjJhBXEjQoEUM6H/2gAMAwEAAhEDEQA/AOqaKKKAooooCiiigKKKKAooooCiiigKKKKAooooCiiigKKKKAooooCiiigKKKKAooooCiiigKKKKAooooCiiigKKKKAooooCiiigKKKKAooooCiiigKKKKAooooCiiigKKKKAooooCiiigKKKKAooooCiiigKKKKAooooCiiigKKKKAooooCiiigKKKKAooooCiiigKKKKAooooCiiigKKKKAooooCiiigKKKKAooooCiiigKKKKAooooCiiigKKKKAooooCiiigKKKKAooooCiiigKKKKAooooCiiigKKKKAooooCiiigKKKKAooooCiiigKKKKAooooCiiigKKKKAooooCiiigKKKKAooooCiiigKKKKAooooCiiigKKKKAooooCiiigKKKKAooooCiiigKKKKAooooCiiigKKKKAooooCiiigKKKKAooooCiiigKKKKAooooCiiigKKKKAooooCiiigKKKKAooooCiiigKKKKAooooCiiigKKKKAooooCiiigKKKKAooooCiiigKKKKAooooCiiigKKKKAooooCiiigKKKKAooooCiiigKKKKAooooCiiigKKKKAooooCiiigKKKKAooooCiiigKKKKAooooCiiigKKKKAooooCiiigKKKKAooooCiiigKKKKAooooCiiigKKKKAooooCiiigKKKKAoorzPyoPaKQkS2I6SqQ+y0kdytYTj8aZJ2ttMwCRLvtubI8vHSf3GgkVFQh7qrots4/T0dZ/8AdoWr9wrVd6w6Lbz/AMrbsDPusr/lU2LBoqtz1o0WMZuLwyNwzGX2/CskdZ9Eq/8A2qsfOOv+VNixqKrsdZdEHvdyPnHc/wDLQrrNodP/AO2CflHc/wDLV2aWJRVevdYdFsrCV3YhRAV/cLPB7eVYf1z6H/8Azsr/APh3P/LU2aWLRVeHrHooEg3VXGOfAX5/SsP66NEf/nVf/wDDr/lTcFjUVXz/AFf0fHP624PBPYL9mcKVefBxzxSP9dOiP/zm7/8Aw6/5U3DSx6Krn+ufRXOLm4flHX/KvVdZdFJ2Zubg3DcP7OvkfhTZpYtFVyOtGiMZ/Six846/5Vl/XLoj/wDOysevs7n/AJabNLEoqvk9YtEKxi8dwTyw55f9WgdYtEHP/LH/APoc/wDLTZpYNFV8OsOiP/zx/wD6HP8Ay17/AFwaI/8Azz//AKHP/LTZpYFFQD+t/RPH/LSef/cuf+Wg9X9E/wD55T/+hc/8tNmk/oqAK6waIH/7ZB+TDn/lpM9ZNE5AF2Uc/wD+O5/5abNLDoqul9ZtFIJBuTvHpHX/ACrKN1i0dJeS01cHSs+sdYH44puGlh0VWq+tei05/t8gkHHEZf8AKsf67dFf/l0kfOMv+VNwWZRVbK606OS6W1S5IWMAj2dXnWB626LH/wCMlf8A8Mqm4LMoqtE9bNFqVj22T2zkx1YrxfW7RaDzMk/SOqm4LMoqt3+tGjGktEz3lFxIUAhhSsZ8j8aS/ru0YCQZcvI7/wBmVTYs2iqxPW/RY/8AxcvH/wC7Kr09btGAAmVLGf8A/GVTYs2iqyT1t0WoE+2yRg4wY6q8PXDRYOPa5fbP/NlU2aWdRVZK63aMBViVLITjJEdWOaxX1w0YlRBkzCQccRlU2aWfRVW/16aM/wCnnf8A8Mf51631y0c4SA7OyATzHI4H1psWjRVVq67aNBwHpx+Uc/zr3+vXRuQPEn5Pl7Mf502LToqrf68tHh7w1OTknkZMc4yPrSaeu+jycZuAPxj/AOtPaGlrUVVY66aRIWR+kdqe59n8/TvXn9e2j9uQud/+g/1p7Q0tWiqqR120eoZCrh3xzH/1rFXXjSCSR/yieccR+/502aWvRVUHrzpAY4uPP/uB/Oj+vjSGMgXE/wDyB/Omxa9FVQrrzpAY/wDtA59I/wDrQjrvpFSVEC4gJx3YAJz6c02LXoqqFdeNIjPu3E474YH86xV160gBlIuKvkwP502LZoqpf6+tI4zsuX/8OP51krr1o5KgAbifUiPx++m4aWxRVSnr5pAeVyx6iOP517/X1pDAwLjz/wD44/nTcFs0VVCevGkCcKNxT8TH/wBaxX160ghwp/5RIH7Qj8fvpuC2aKqb+vnSGcf8pZ7/APNx/Os09eNGH/2lwHzjf603Ba1FVgx1x0U7jMyU3z+3GV/DNb8fq/ol9QT+mktknA8RlY/hV2LAoqLwdf6Umkezagtys/4ngj9+KfYtyhTADElx3wf+jcCv3UG3RXgJIr2gKKKKAooooCiiigKKKKAooooCiiigKKKKAooooCiiigKKKKAooooCiiigKKKKAooooCiiigKKKKAooooCiiigKKKKAooooCiiigKKKKAooooCiiigKKKKAooooCiiigKK8yajeptcaf002s3a5MtuJ/8AZJO9f/ZHI+tBJaxUcAkkAfGuetSfaFdU4tnTtpCU87XpSsq+ewfzqqb3r3Umo3nVXS7SVse8Sy2sobTxx7ox8Kmx1vfNdabsiVG4XiIhSUlRQhe9eB34Tnmq6vP2gbMylQs9tly1A4C3iGkH95/KuZ3HWUiQ2CRyNvAOfM8/upBpK33EhhtxRz2QkqP5VLRcN66+anlqUi3swYKOfeQ2XFficj8qhd16i6suaT7XfpxT/hbc8MfgnFadu0TqW6DdGsz6G+5ceHhJA9cqpzV099jA/TOpbJCUfvNh7xVD4YFZ9l0i0mZIcUfHluPbxlW5ZVn8aQS6VEEqJ+JqXiw6Khj+2anly1AkERImAfqaabqLC3eoJ077aqLuBcRMA3EgjBGPI0uRpLtO9ItR3yxRLrFVDQxJRvbQ6spWU54PbzreV0P1aD7pgK+TxH8K6Ys7TDNqhtxUBDCWUhCR2AwK2iKnrarlr+pLVxPaAfIZf7flXv8AUhqzvm3dv+mP8q6iI+Aox8Knr/pty7/UfqwnG+3f/pT/ACrxvofqsqWFqt6EY4V4xOfyrqPbRinr/pty470O1Yk+4uA5x5PEfwr1HQ7Vqk5Kren5vH+VdRYop6/6bcwtdC9VFWFv25Cfi6r/AMtB6GapK1Dx7dtB4V4pwfyrp/AoFPU25kPQ7VSihKpVv2JGAPFUQn5cV5/UXqcLAEm3KSTjIcVx8fu107tHpXm2nqbcxnoXqgfdlW8//MV/5a9R0K1PgkzLck/FxX8q6bxRinobcyDoTqbnMu3DB4ypRz+Ve/1FamJx7XbseoUr+VdM7a92/KnobcyL6E6mSgKRKtylf4dyh/CsmuhOpXAPFl25sD/Mo/wrpjHwFehI8hinobc2I6C3497nbgf+t/KvD0H1CFgC5W4pPn73H5V0pijbT0Nubf6hr8M/8qW75+9/Ks09A70Ve9d4AGO4SqukMV6Einobc5f1A3f/APO8H6trrP8AqBuhHN6iZ/8AhK/nXRmKMU9P9NudldAbkQAb3Fz54aV/OvG+gFy3frL3ECfUNKz++uitte4p6G3Ov/0f5/nfYoH/AMBWf31TV+t7tpvU22vKK1xnlMlQT97BxkV3Y4Bg8VFndNWSZIcemWuM64tRKnSk5J+NYz9sf6tSS9uLlKIxuCsHjJ9KyaUVpXg4KQCE4yVeXFXp9oizWu12GCbVGZZSt4hZQO5449arXo+yy/1DtLEltLrLjhQpKuxyK1jbZu9s2SN3QPTq86yhzJNvdjsIjOJbKZBUkqJGcjg8VJnOhOpwkbJduVj/AN4of/q10ZZrdFt4e9kYSwlwgqAOe1OBFXVvJ05ePQnVOT/aLcP/AJiuf+7XjfQzVQWCt23FPn+tVz/3a6fIrHHPap6/6u3MC+huquSHrdyeMOq7f9msk9C9UkjMm3AHvlxRx/3a6dCR6CvQKvr/AKbczK6FanCSEzLdg98qV/Kkh0M1QCf7RbT6frD/ACrp7Hwr35U9f9Tbl4dC9Ug4Mi2gevin+Veq6FapGSJFtz6eIr/y11BijAp6/wCm3L6ehOqeP7Rbe/OXFf8Alo/qJ1Qc7pFuHp+sV/5a6fr3FPX/AEcvK6Fapxw/bj8nT/Ks09C9ToCkl+2qSoDOHFZH12109XhSPSp6/wCq5fHQnVJSD7Rbs98eIr/y1mOhOqCPel25P/zFH/8AVrp3FegU9b+xzCeheqgCkyrftPfDiv8Ay14ehOqNvEm2k47eIr/y10/Qaet/Y5hHQjVBSD7VbfLine truncated
|
||||
|
After Width: | Height: | Size: 321 KiB |
@@ -0,0 +1 @@
|
||||
<svg xmlns="http://www.w3.org/2000/svg" width="880" height="737" viewBox="0 0 1580 1323" data-theme="light" data-conn="overview"><rect width="1580" height="1323" rx="10" fill="#ffffff" stroke="#d0d7de"/><image x="264" y="118" width="1064" height="1075" href="data:image/jpeg;base64,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 truncated
|
||||
|
After Width: | Height: | Size: 292 KiB |
@@ -203,6 +203,7 @@
|
||||
- [mRo Control Zero F7](flight_controller/mro_control_zero_f7.md)
|
||||
- [NWBlue Pro H757](flight_controller/nwblue_pro-h757.md)
|
||||
- [NXP MR-NavQ95](flight_controller/nxp_mr_navq95.md)
|
||||
- [NXP MR-VMU-TROPIC](flight_controller/nxp_mr_tropic.md)
|
||||
- [Radiolink PIX6](flight_controller/radiolink_pix6.md)
|
||||
- [Sky-Drones AIRLink](flight_controller/airlink.md)
|
||||
- [SPRacing SPRacingH7EXTREME](flight_controller/spracingh7extreme.md)
|
||||
|
||||
@@ -52,6 +52,7 @@ The boards in this category are:
|
||||
- [mRo Control Zero](../flight_controller/mro_control_zero_f7.md)
|
||||
- [NWBlue Pro H757](../flight_controller/nwblue_pro-h757.md)
|
||||
- [NXP MR-NavQ95](../flight_controller/nxp_mr_navq95.md)
|
||||
- [NXP MR-VMU-TROPIC](../flight_controller/nxp_mr_tropic.md)
|
||||
- [Radiolink PIX6](../flight_controller/radiolink_pix6.md)
|
||||
- [Sky-Drones AIRLink](../flight_controller/airlink.md)
|
||||
- [SPRacing SPRacingH7EXTREME](../flight_controller/spracingh7extreme.md)
|
||||
|
||||
@@ -0,0 +1,291 @@
|
||||
# NXP MR-VMU-TROPIC
|
||||
|
||||
<Badge type="tip" text="PX4 v1.17" />
|
||||
|
||||
::: warning
|
||||
PX4 does not manufacture this (or any) autopilot.
|
||||
Contact the [manufacturer](https://www.nxp.com) for hardware support or compliance issues.
|
||||
:::
|
||||
|
||||
The [MR-VMU-TROPIC](https://github.com/NXP-Robotics/MR-VMU-TROPIC) is NXP's open source reference design of a versatile VMU that can be used for drones, rovers, boats, and more.
|
||||
As a reference/evaluation design, it is intended to be replicated, modified or integrated in production volume by others.
|
||||
Since it is a reference design, this particular board is not produced in high volume.
|
||||
Similar variants will be available from NXP licensees.
|
||||
|
||||
The board combines an NXP i.MX RT1064 with sensor technology from Bosch® and InvenSense® on one compact board.
|
||||
It is suitable for controlling any autonomous vehicle, in both academic and commercial applications.
|
||||
The high-performance, low-noise IMUs are designed for better stabilisation.
|
||||
|
||||
Besides the standard interfaces, it has 100BASE-T1 (two-wire) automotive Ethernet and 8 PWM outputs, all with [DShot](../peripherals/dshot.md).
|
||||
|
||||
The MR-VMU-TROPIC reference design suits developers at corporate research labs, startups, academia and commercial companies who want to try out 100BASE-T1 (two-wire) automotive Ethernet.
|
||||
|
||||

|
||||
|
||||
::: info
|
||||
This flight controller is [manufacturer supported](../flight_controller/autopilot_manufacturer_supported.md).
|
||||
:::
|
||||
|
||||
## Specifications {#specifications}
|
||||
|
||||
### Processor {#processor}
|
||||
|
||||
- **Main FMU processor:** [NXP i.MX RT1064](https://www.nxp.com/products/i.MX-RT1064) Crossover MCU (32-bit Arm® Cortex®-M7 at 600MHz, 1MB on-chip SRAM with up to 512KB configurable as tightly coupled memory, 4MB on-chip flash)
|
||||
|
||||
### Sensors {#sensors}
|
||||
|
||||
- **IMU:** [TDK InvenSense ICM-45686](https://invensense.tdk.com/products/motion-tracking/6-axis/icm-45686/) (SPI3), [Bosch BMI088](https://www.bosch-sensortec.com/en/products/motion-sensors/imus/bmi088/) (SPI4).
|
||||
Hardware versions with a [TDK InvenSense ICM-42686-P](https://invensense.tdk.com/products/motion-tracking/6-axis/icm-42686-p/) in place of the ICM-45686 are supported from PX4 v2.0 (currently `main`).
|
||||
- **Barometer:** [Bosch BMP390](https://www.bosch-sensortec.com/en/products/environmental-sensors/pressure-sensors/bmp390/) (I2C4)
|
||||
- **Magnetometer:** [Bosch BMM350](https://www.bosch-sensortec.com/en/products/motion-sensors/magnetometers/bmm350/) (I2C4)
|
||||
|
||||
### Interfaces {#interfaces}
|
||||
|
||||
- **PWM outputs:** 8, all with DShot and bidirectional DShot
|
||||
- **Serial ports:** 5 (`GPS`, `TELEM1`, `TELEM2`, `AUX`, `RC`), plus the debug console and an ESC telemetry input; `TELEM1` and `TELEM2` have full flow control
|
||||
- **I2C buses:** 3 (I2C4 internal; I2C1 and I2C3 external), with 1 external port (`I2C`) for additional sensors and payloads
|
||||
- **SPI buses:** 2 internal (SPI3, SPI4), plus 1 external (`SPI (OSD)`) with 1 chip select line, 1 data-ready line and 1 reset line, not used by the default firmware
|
||||
- **CAN buses:** 1 (classic CAN in PX4; CAN FD-capable NXP TJA1462ATK transceiver, 120Ω termination resistor on board)
|
||||
- **Ethernet:** 100BASE-T1, 100Mbps, for transformerless applications and high-speed communication with mission computers (NXP TJA1103 PHY)
|
||||
- **USB:** USB-C, high speed (480Mbps)
|
||||
- **RC input:** Yes, dedicated input for [CRSF/ELRS](../telemetry/crsf_telemetry.md)
|
||||
- **Parameter storage:** flash
|
||||
- **SD card:** microSD slot
|
||||
|
||||
### Electrical Data {#electrical_data}
|
||||
|
||||
- **Input voltage:** 5.5V maximum
|
||||
- **USB power input:** 5V
|
||||
- **Current draw:** typically 0.25–0.35A at 5V
|
||||
- **Power monitoring:** 1 digital input on `POWER` (INA226 at `0x41`, or INA228 or INA238 at `0x45`, detected automatically); no analog input
|
||||
|
||||
### Mechanical Data {#mechanical_data}
|
||||
|
||||
- **Dimensions:** 46 x 45 x 1.57mm
|
||||
- **Weight:** 12g
|
||||
- **Operating and storage temperature:** 0–85°C
|
||||
|
||||
## Where to Buy {#store}
|
||||
|
||||
Order from [NXP](https://www.nxp.com/design/design-center/development-boards-and-designs/MR-VMU-TROPIC).
|
||||
|
||||
## Pinouts {#pinouts}
|
||||
|
||||
The `TELEM1`, `TELEM2`, `GPS`, `I2C`, `CAN` and `DEBUG` connectors follow the [Pixhawk Connector Standard](https://github.com/pixhawk/Pixhawk-Standards/blob/master/DS-009%20Pixhawk%20Connector%20Standard.pdf) (DS-009).
|
||||
The ESC headers (`PWM_A` and `PWM_B`) follow the [Betaflight ESC connector standard](https://betaflight.com/docs/development/manufacturer/connector-standard#standard-esc-pin-configuration).
|
||||
|
||||
The pinout of every connector is given in NXP's [MR-VMU-TROPIC hardware reference](https://github.com/NXP-Robotics/MR-VMU-TROPIC#board-overview) (also as a [PDF](https://github.com/NXP-Robotics/MR-VMU-TROPIC/blob/main/MR-VMU-Tropic-hardware-reference.pdf) and a one-page [cheat sheet](https://github.com/NXP-Robotics/MR-VMU-TROPIC/blob/main/MR-VMU-Tropic-cheatsheet.pdf)).
|
||||
The schematic is [SPF-94468_F.pdf](https://github.com/NXP-Robotics/MR-VMU-TROPIC/blob/main/schematics_and_production_files/tropic_rev_F/SPF-94468_F.pdf) (rev F).
|
||||
|
||||
### Top Side Connectors
|
||||
|
||||
| Connector | Label | Function | Type | Standard |
|
||||
| --------- | ----------- | ------------------------------------------------------------------ | ------------------- | ------------------- |
|
||||
| `J2` | `POWER` | Power module input: 5V and battery monitor I2C | Molex CLIK-Mate 1x6 | — |
|
||||
| `J3` | `DEBUG` | SWD and console | JST-SH 1x10 | DS-009 (Debug Full) |
|
||||
| `J4` | `GPS` | GPS, compass, safety switch and buzzer | JST-GH 1x10 | DS-009 |
|
||||
| `J5` | `CAN` | CAN FD, CAN-SIC (Signal Improvement) transceiver, 120Ω termination | JST-GH 1x4 | DS-009 |
|
||||
| `J6` | `SPI (OSD)` | External SPI port for an OSD board | JST-GH 1x8 | — |
|
||||
| `J7` | `AUX` | Spare serial port | JST-GH 1x6 | — |
|
||||
| `J8` | `TELEM1` | Telemetry port 1, with flow control | JST-GH 1x6 | DS-009 |
|
||||
| `J9` | `TELEM2` | Telemetry port 2, with flow control | JST-GH 1x6 | DS-009 |
|
||||
| `J10` | `I2C` | External I2C bus, shared with `GPS` | JST-GH 1x4 | DS-009 |
|
||||
| `J11` | `RC` | Serial RC receiver | JST-GH 1x4 | — |
|
||||
| `P1` | `ETH` | 100BASE-T1 100Mbps Ethernet | JST-GH 1x2 | — |
|
||||
|
||||

|
||||
|
||||
### Bottom Side Connectors
|
||||
|
||||
| Connector | Label | Function | Type | Standard |
|
||||
| --------- | --------- | ------------------------------ | ------------------ | -------------- |
|
||||
| `J1` | `USB` | USB 2.0 device port | USB-C | — |
|
||||
| `J12` | `PWM_B` | Motor outputs 5–8 (ESC header) | JST-SH 1x8 | Betaflight ESC |
|
||||
| `J13` | `PWM_A` | Motor outputs 1–4 (ESC header) | JST-SH 1x8 | Betaflight ESC |
|
||||
| `CN1` | `MICROSD` | microSD card slot | microSD, push-push | — |
|
||||
|
||||

|
||||
|
||||
## Power {#power}
|
||||
|
||||
The board has two power rails: **POWER** and **USB**.
|
||||
The **POWER** rail is supplied via the `J2` connector (the 6-circuit [2.00mm pitch CLIK-Mate wire-to-board PCB receptacle](https://www.molex.com/en-us/products/part-detail/5024430670)) and directly powers the following ports: `I2C` (`J10`), `GPS` (`J4`), `AUX` (`J7`), `CAN` (`J5`), `TELEM1` (`J8`), `TELEM2` (`J9`), `RC` (`J11`) and `SPI (OSD)` (`J6`).
|
||||
|
||||
::: warning
|
||||
Feed only 5V into `POWER` (`J2`): there is no regulator behind this connector, and a higher voltage damages the board.
|
||||
Every other 5V pin on the board is an output: never feed power into it.
|
||||
Any device connected to the ports listed above must be compatible with the **POWER** voltage rail.
|
||||
:::
|
||||
|
||||
Battery monitoring is digital, over I2C (I2C3 on the `POWER` port).
|
||||
Any power module with an INA226 at address `0x41`, or an INA228 or INA238 at `0x45`, is detected automatically.
|
||||
To start a specific one instead, [set](../advanced_config/parameters.md) [SENS_EN_INA226](../advanced_config/parameter_reference.md#SENS_EN_INA226), [SENS_EN_INA228](../advanced_config/parameter_reference.md#SENS_EN_INA228) or [SENS_EN_INA238](../advanced_config/parameter_reference.md#SENS_EN_INA238) to `1`.
|
||||
|
||||
::: info
|
||||
Analog battery monitoring via an ADC is not supported on this board.
|
||||
:::
|
||||
|
||||
See [Battery and Power Module Setup](../config/battery.md) for configuration.
|
||||
|
||||
## Voltage Ratings {#voltage_ratings}
|
||||
|
||||
### Normal Operation Maximum Ratings
|
||||
|
||||
| Rail | Minimum | Maximum |
|
||||
| --------- | ------- | ------- |
|
||||
| **USB** | 4.5V | 5.5V |
|
||||
| **POWER** | 4.9V | 5.5V |
|
||||
|
||||
### Absolute Maximum Ratings
|
||||
|
||||
| Rail | Minimum | Maximum |
|
||||
| --------- | ------- | ------- |
|
||||
| **USB** | 0V | 6V |
|
||||
| **POWER** | 0V | 6V |
|
||||
|
||||
## PWM Outputs {#pwm_outputs}
|
||||
|
||||
The board has 8 PWM outputs.
|
||||
All of them support [DShot](../peripherals/dshot.md) and [bidirectional DShot](../peripherals/dshot.md#bidirectional-dshot-telemetry).
|
||||
|
||||
The outputs are divided into 4 groups:
|
||||
|
||||
- Outputs 1-2
|
||||
- Outputs 3-4
|
||||
- Outputs 5-6
|
||||
- Outputs 7-8
|
||||
|
||||
All outputs within the same group must use the same output protocol and rate.
|
||||
|
||||
Outputs 1–4 are on `PWM_A` (`J13`) and outputs 5–8 on `PWM_B` (`J12`).
|
||||
Both headers follow the [Betaflight ESC connector standard](https://betaflight.com/docs/development/manufacturer/connector-standard#standard-esc-pin-configuration), so a 4-in-1 ESC with a standard 8-pin cable fits.
|
||||
The headers have no 5V pin, and their battery voltage and current pins (1 and 3) are not connected: the board doesn't use the ESC's [BEC](../peripherals/pwm_escs_and_servo.md#power-connections) or read battery voltage or current from the ESC.
|
||||
|
||||
Serial ESC telemetry is received on pin 4 of both headers (`/dev/ttyS5`, ESC ONEWIRE) and is enabled by default.
|
||||
|
||||
## Ethernet {#ethernet}
|
||||
|
||||
The `P1` port provides 100BASE-T1 Ethernet.
|
||||
The other end needs a 100BASE-T1 device or a media converter.
|
||||
MAVLink runs on Ethernet by default, using UDP port 14550 ([MAV_2_CONFIG](../advanced_config/parameter_reference.md#MAV_2_CONFIG) is set to `Ethernet`).
|
||||
|
||||
See [PX4 Ethernet Setup](../advanced_config/ethernet_setup.md) for more information.
|
||||
|
||||
## SD Card (Optional) {#sd_card}
|
||||
|
||||
The microSD card slot (`CN1`) is on the bottom of the board.
|
||||
See [SD Cards (Removable Memory)](../getting_started/px4_basic_concepts.md#sd-cards-removable-memory).
|
||||
|
||||
## Serial Port Mapping {#serial_port_mapping}
|
||||
|
||||
| UART | Device | Port | Flow Control |
|
||||
| ------- | ---------- | ----------- | ------------ |
|
||||
| LPUART6 | /dev/ttyS0 | `DEBUG` | No |
|
||||
| LPUART2 | /dev/ttyS1 | `GPS` | No |
|
||||
| LPUART3 | /dev/ttyS2 | `TELEM1` | Yes |
|
||||
| LPUART4 | /dev/ttyS3 | `AUX` | No |
|
||||
| LPUART5 | /dev/ttyS4 | `TELEM2` | Yes |
|
||||
| LPUART7 | /dev/ttyS5 | ESC ONEWIRE | No |
|
||||
| LPUART8 | /dev/ttyS6 | `RC` | No |
|
||||
|
||||
::: info
|
||||
The `AUX` port is `TELEM 3` in the [serial port configuration](../peripherals/serial_configuration.md).
|
||||
:::
|
||||
|
||||
## Assembly {#assembly}
|
||||
|
||||
### Radio Control {#radio_control}
|
||||
|
||||
A remote control (RC) radio system is required if you want to manually control your vehicle (PX4 does not require a radio system for autonomous flight modes).
|
||||
You will need to [select a compatible transmitter/receiver](../getting_started/rc_transmitter_receiver.md) and then bind them so that they communicate.
|
||||
|
||||
Connect the receiver to the `RC` port (`J11`, JST-GH 4-pin), which is the FMU serial port `/dev/ttyS6`.
|
||||
CRSF receivers are enabled on this port by default, with telemetry.
|
||||
|
||||
The default firmware also includes DSM, GHST and S.BUS drivers.
|
||||
To use one of these protocols, set [RC_CRSF_PRT_CFG](../advanced_config/parameter_reference.md#RC_CRSF_PRT_CFG) to `Disabled`, and then set [RC_DSM_PRT_CFG](../advanced_config/parameter_reference.md#RC_DSM_PRT_CFG), [RC_GHST_PRT_CFG](../advanced_config/parameter_reference.md#RC_GHST_PRT_CFG) or [RC_SBUS_PRT_CFG](../advanced_config/parameter_reference.md#RC_SBUS_PRT_CFG) to `Radio Controller`.
|
||||
Only one protocol can be active on a port.
|
||||
|
||||
DSM binding is not supported: receivers must already be bound.
|
||||
PPM receivers are not supported, because `RC` is a serial port.
|
||||
PWM receivers, which need a PPM encoder, can't be used either.
|
||||
|
||||
### GPS & Compass {#gps_compass}
|
||||
|
||||
Connect the GPS module to the `GPS` port (`J4`, Pixhawk standard), which carries the GPS serial port (`/dev/ttyS1`) and the I2C1 bus for an external compass.
|
||||
The port also carries the safety switch and its LED, and the buzzer.
|
||||
The `I2C` port (`J10`) is on the same I2C bus, so devices on the two ports need different addresses.
|
||||
The board also has an internal Bosch BMM350 magnetometer.
|
||||
|
||||
See [Mounting the GPS/Compass](../assembly/mount_gps_compass.md) for more information.
|
||||
|
||||
### Telemetry Radios (Optional) {#telemetry}
|
||||
|
||||
[Telemetry radios](../telemetry/index.md) can be connected to any free serial port, such as `TELEM1` (`J8`), `TELEM2` (`J9`) or `AUX` (`J7`).
|
||||
`TELEM1` is configured for MAVLink by default and needs no further configuration.
|
||||
To use another port, see [MAVLink Peripherals](../peripherals/mavlink_peripherals.md).
|
||||
|
||||
### CAN {#can}
|
||||
|
||||
Connect [DroneCAN](../dronecan/index.md) peripherals to the `CAN` port (`J5`).
|
||||
DroneCAN is disabled by default; enable it with [UAVCAN_ENABLE](../advanced_config/parameter_reference.md#UAVCAN_ENABLE).
|
||||
|
||||
## PX4 Bootloader Update {#bootloader}
|
||||
|
||||
NXP's [PX4 setup guide](https://github.com/NXP-Robotics/MR-VMU-TROPIC/blob/main/PX4_Autopilot.md) says that a board that doesn't come with the PX4 bootloader needs it flashed before PX4 can be installed.
|
||||
|
||||
To flash it over USB, follow [Bootloader Update Pixhawk V6X-RT via USB](../advanced_config/bootloader_update_v6xrt.md), with these changes:
|
||||
|
||||
- Use `nxp_mr-tropic_bootloader.bin` (see [Building Firmware](#building_firmware)).
|
||||
- Select `MIMXRT1064` in place of `MIMXRT1176`.
|
||||
- Skip the _Boot Memory Configuration_ step.
|
||||
- To start the serial downloader, hold the `BOOT` button (`SW2`) while powering the board.
|
||||
|
||||
You can also flash `nxp_mr-tropic_bootloader.bin` at address `0x70000000` with an [SWD](../debug/swd_debug.md) debugger on the `DEBUG` port.
|
||||
|
||||
## Building Firmware {#building_firmware}
|
||||
|
||||
::: tip
|
||||
Most users will not need to build this firmware!
|
||||
It is pre-built and automatically installed by _QGroundControl_ when appropriate hardware is connected.
|
||||
:::
|
||||
|
||||
To [build PX4](../dev_setup/building_px4.md) for this target:
|
||||
|
||||
```sh
|
||||
make nxp_mr-tropic_default
|
||||
```
|
||||
|
||||
To build the bootloader:
|
||||
|
||||
```sh
|
||||
make nxp_mr-tropic_bootloader
|
||||
```
|
||||
|
||||
## Debug Port {#debug_port}
|
||||
|
||||
The [PX4 System Console](../debug/system_console.md) and [SWD interface](../debug/swd_debug.md) run on the FMU debug port (`J3`).
|
||||
|
||||
The pinouts and connector comply with the [Pixhawk Debug Full](../debug/swd_debug.md#pixhawk-debug-full) interface defined in the [Pixhawk Connector Standard](https://github.com/pixhawk/Pixhawk-Standards/blob/master/DS-009%20Pixhawk%20Connector%20Standard.pdf) (JST SM10B connector).
|
||||
|
||||
| Pin | Signal | Volt |
|
||||
| -------- | ---------------- | ----- |
|
||||
| 1 (red) | `Vtref` | +3.3V |
|
||||
| 2 (blk) | Console TX (OUT) | +3.3V |
|
||||
| 3 (blk) | Console RX (IN) | +3.3V |
|
||||
| 4 (blk) | `SWDIO` | +3.3V |
|
||||
| 5 (blk) | `SWCLK` | +3.3V |
|
||||
| 6 (blk) | `SWO` | +3.3V |
|
||||
| 7 (blk) | NC | - |
|
||||
| 8 (blk) | NC | - |
|
||||
| 9 (blk) | nRST | +3.3V |
|
||||
| 10 (blk) | `GND` | GND |
|
||||
|
||||
## Further Information {#further_information}
|
||||
|
||||
- [MR-VMU-TROPIC hardware reference](https://github.com/NXP-Robotics/MR-VMU-TROPIC) (NXP Robotics GitHub)
|
||||
- [MR-VMU-TROPIC PX4 setup guide](https://github.com/NXP-Robotics/MR-VMU-TROPIC/blob/main/PX4_Autopilot.md) (NXP Robotics GitHub)
|
||||
- [MR-VMU-TROPIC schematic, rev F](https://github.com/NXP-Robotics/MR-VMU-TROPIC/blob/main/schematics_and_production_files/tropic_rev_F/SPF-94468_F.pdf)
|
||||
- [MR-VMU-TROPIC](https://nxp.gitbook.io/vmu-rt1176/tropic) (NXP GitBook)
|
||||
- [NXP Community](https://community.nxp.com/) (hardware support)
|
||||
- [Pixhawk Connector Standard](https://github.com/pixhawk/Pixhawk-Standards/blob/master/DS-009%20Pixhawk%20Connector%20Standard.pdf)
|
||||
Reference in new issue
Block a user