UAV-develop/PX4-Autopilot
1
0
Fork 0
mirror of https://github.com/PX4/PX4-Autopilot.git synced 2026-07-26 16:28:06 +08:00
Code Issues Packages Projects Releases Wiki Activity
Files
d3f912ad2571bad4dd843e9f55a3e7a1fb9fd44a
PX4-Autopilot/platforms/nuttx/CMakeLists.txt
henrykotze 8b58c01cd7 ESP32 Support Sponsored by AutonoSky 
nsh console running on USB
param module running
working with i2c and common drivers
provided implementation for drv_pwm_output.h
i2cdetect working as expected with no device
mavlink started succesfully
mounts sd card and logger runs
logger to file succesfully
pwm_servo implemented without using Nuttx lib
pwm_out outputs expected waveforms
- however currently if the frequency is higher than what the pwm_out
driver runs, there will be aliasing, based on how the registers gets
resets
wifi softap working
- Seeing wifi hotspot
- cant connect due to wrong password
- problems with adjusting ssid and password
wifi ssid and password being set accordinglu
connected to wifi hotspot with dhpcd
- made some changes to nuttx to only build for SoftAP mode, however this
was effectivelyy removing the ifdef for STATION mode. Should investigate
the coexist option again
added ifdef to not use timer 0 when wifi enabled
- reverted esp32 rt_timer to make use of timer 0 by default

fix setting incorrect bit in hrt timer register

- hrt running as expected, but on startup the pwm_out driver starts up
at about 200Hz and then rises over a minute or so 250Hz. Not sure if
this was present previously, and could be due to Wifi running at time
priority on timer 0

pull xtensa compilers in setup.ubuntu.sh
revert logger stacksize and cmake argument
esp32 chip revision and PX4 UUID implemented

spi board reset implemented, formatting checked

devkit acts on startup as a wifi bridge for comms

- the most usefull setting for the general developer when buying a esp32 devkit
- testing Mavlink shell using ./Tools/mavlink_shell.py
- todo: Test mavlink messages being forward

improve wifi telemetry by increasing prio

- Remove power save mode on wifi
- increased daemon thread schedule priority to 50

compiles without Nuttx changes

- updated compiler settings to match those of nuttx on px4 side

add espressif_esp32 to excluded boards

ci: allow docker to find xtensa compilers
2025-08-19 11:09:56 -07:00

634 lines
18 KiB
CMake
Raw Blame History

############################################################################
#
# Copyright (c) 2017 PX4 Development Team. All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name PX4 nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
if(POLICY CMP0079)
cmake_policy(SET CMP0079 NEW)
endif()
include(cygwin_cygpath)
add_executable(px4 ${PX4_SOURCE_DIR}/platforms/common/empty.c)
set(FW_NAME ${PX4_BOARD_VENDOR}_${PX4_BOARD_MODEL}_${PX4_BOARD_LABEL}.elf)
set_target_properties(px4 PROPERTIES OUTPUT_NAME ${FW_NAME})
add_dependencies(px4 git_nuttx)
get_property(module_libraries GLOBAL PROPERTY PX4_MODULE_LIBRARIES)
if (NOT CONFIG_BUILD_FLAT)
add_executable(px4_kernel ${PX4_SOURCE_DIR}/platforms/common/empty.c)
set(KERNEL_NAME ${PX4_BOARD_VENDOR}_${PX4_BOARD_MODEL}_${PX4_BOARD_LABEL}_kernel.elf)
set_target_properties(px4_kernel PROPERTIES OUTPUT_NAME ${KERNEL_NAME})
add_dependencies(px4_kernel git_nuttx)
get_property(kernel_module_libraries GLOBAL PROPERTY PX4_KERNEL_MODULE_LIBRARIES)
endif()
# build NuttX
add_subdirectory(NuttX ${PX4_BINARY_DIR}/NuttX)
# check that CONFIG_ARCH_BOARD_CUSTOM_DIR is in PX4_BOARD_DIR
if(CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH)
get_filename_component(nuttx_defconfig_root "${NUTTX_DEFCONFIG}/../.." ABSOLUTE)
get_filename_component(nuttx_config_from_defconfig "${NUTTX_DIR}/${CONFIG_ARCH_BOARD_CUSTOM_DIR}" ABSOLUTE)
if(NOT ${nuttx_defconfig_root} MATCHES ${nuttx_config_from_defconfig})
message(FATAL_ERROR "NuttX custom board directory (${CONFIG_ARCH_BOARD_CUSTOM_DIR}) isn't in board directory (${PX4_BOARD_DIR})")
endif()
endif()
set(nuttx_libs)
set(SCRIPT_PREFIX)
if("${PX4_BOARD_LABEL}" STREQUAL "bootloader")
set(SCRIPT_PREFIX ${PX4_BOARD_LABEL}_)
add_subdirectory(src/bootloader)
list(APPEND nuttx_libs
bootloader
bootloader_lib
drivers_board
)
elseif("${PX4_BOARD_LABEL}" STREQUAL "canbootloader")
set(SCRIPT_PREFIX ${PX4_BOARD_LABEL}_)
add_subdirectory(src/canbootloader)
list(APPEND nuttx_libs
canbootloader
drivers_board
)
target_link_libraries(px4 PRIVATE
-Wl,-wrap,nxsched_process_timer
-Wl,-wrap,nxsem_post
-Wl,-wrap,nxsem_wait
-Wl,-wrap,nxsem_wait_uninterruptible
-Wl,-wrap,arm_svcall
-Wl,-wrap,nx_start
-Wl,-wrap,exit
)
else()
if(NOT "${PX4_BOARD_LINKER_PREFIX}" STREQUAL "")
set(SCRIPT_PREFIX ${PX4_BOARD_LINKER_PREFIX}-)
endif()
endif()
list(APPEND nuttx_libs
nuttx_boards
nuttx_drivers
nuttx_fs
nuttx_sched
nuttx_crypto
nuttx_binfmt
nuttx_xx
)
if (NOT CONFIG_BUILD_FLAT)
list(APPEND nuttx_libs
px4_board_ctrl
nuttx_karch
nuttx_kmm
nuttx_stubs
nuttx_kc
)
else()
list(APPEND nuttx_libs
nuttx_apps
nuttx_arch
nuttx_mm
nuttx_c
)
endif()
if(CONFIG_NET)
list(APPEND nuttx_libs nuttx_net)
target_link_libraries(nuttx_fs INTERFACE nuttx_net)
endif()
file(RELATIVE_PATH PX4_BINARY_DIR_REL ${CMAKE_CURRENT_BINARY_DIR} ${PX4_BINARY_DIR})
# only in the cygwin environment: convert absolute linker script path to mixed windows (C:/...)
# because even relative linker script paths are different for linux, mac and windows
CYGPATH(NUTTX_CONFIG_DIR NUTTX_CONFIG_DIR_CYG)
if((DEFINED ENV{SIGNING_TOOL}) AND (NOT NUTTX_DIR MATCHES "external"))
set(PX4_BINARY_OUTPUT ${PX4_BINARY_DIR}/${PX4_CONFIG}_unsigned.bin)
add_custom_command(OUTPUT ${PX4_BINARY_DIR_REL}/${PX4_CONFIG}.bin
COMMAND $ENV{SIGNING_TOOL} $ENV{SIGNING_ARGS} ${PX4_BINARY_OUTPUT} ${PX4_BINARY_DIR}/${PX4_CONFIG}.bin
DEPENDS ${PX4_BINARY_OUTPUT}
WORKING_DIRECTORY ${PX4_SOURCE_DIR}
)
else()
set(PX4_BINARY_OUTPUT ${PX4_BINARY_DIR_REL}/${PX4_CONFIG}.bin)
endif()
if (NOT CONFIG_BUILD_FLAT)
target_link_libraries(nuttx_karch
INTERFACE
drivers_board
arch_hrt
)
target_link_libraries(px4_kernel PRIVATE
-nostartfiles
-nodefaultlibs
-nostdlib
-nostdinc++
-fno-exceptions
-fno-rtti
-Wl,--script=${NUTTX_CONFIG_DIR}/scripts/${SCRIPT_PREFIX}memory.ld,--script=${NUTTX_CONFIG_DIR}/scripts/${SCRIPT_PREFIX}kernel-space.ld
-Wl,-Map=${PX4_CONFIG}_kernel.map
-Wl,--warn-common
-Wl,--gc-sections
-Wl,--start-group
${nuttx_libs}
${kernel_module_libraries}
-Wl,--end-group
m
gcc
)
if (config_romfs_root)
add_subdirectory(${PX4_SOURCE_DIR}/ROMFS ${PX4_BINARY_DIR}/ROMFS)
target_link_libraries(px4_kernel PRIVATE romfs)
endif()
target_link_libraries(px4_kernel PRIVATE -Wl,--print-memory-usage)
set(nuttx_userspace)
list(APPEND nuttx_userspace
drivers_userspace
nuttx_arch
nuttx_apps
nuttx_mm
nuttx_proxies
nuttx_c
nuttx_xx
)
target_link_libraries(nuttx_c INTERFACE nuttx_proxies)
target_link_libraries(px4 PRIVATE
-nostartfiles
-nodefaultlibs
-nostdlib
-nostdinc++
-fno-exceptions
-fno-rtti
-Wl,--script=${NUTTX_CONFIG_DIR}/scripts/${SCRIPT_PREFIX}memory.ld,--script=${NUTTX_CONFIG_DIR}/scripts/${SCRIPT_PREFIX}user-space.ld
-Wl,-Map=${PX4_CONFIG}.map
-Wl,--warn-common
-Wl,--gc-sections
-Wl,--start-group
${nuttx_userspace}
-Wl,--end-group
m
gcc
)
target_link_libraries(px4 PRIVATE -Wl,--print-memory-usage)
target_link_libraries(px4 PRIVATE
${module_libraries}
)
add_custom_command(OUTPUT ${PX4_BINARY_OUTPUT}
COMMAND ${CMAKE_OBJCOPY} -O binary ${PX4_BINARY_DIR_REL}/${FW_NAME} ${PX4_BINARY_DIR_REL}/${PX4_BOARD}_user.bin
COMMAND ${CMAKE_OBJCOPY} --gap-fill 0xFF --pad-to ${CONFIG_NUTTX_USERSPACE} -O binary ${PX4_BINARY_DIR_REL}/${KERNEL_NAME} ${PX4_BINARY_OUTPUT}
COMMAND cat ${PX4_BINARY_DIR_REL}/${PX4_BOARD}_user.bin >> ${PX4_BINARY_OUTPUT}
DEPENDS px4 px4_kernel
)
else()
if(CONFIG_ARCH_CHIP_ESP32)
set(PX4_STARTUP_DIR ${PX4_SOURCE_DIR}/platforms/nuttx/NuttX/nuttx/arch/xtensa/src)
set(WIRELESS_LIB ${PX4_STARTUP_DIR}/esp32/esp-wireless-drivers-3rdparty/libs/esp32/)
set(NUTTX_STARTUP_OBJS
${PX4_STARTUP_DIR}/xtensa_vectors.o
${PX4_STARTUP_DIR}/xtensa_window_vector.o
${PX4_STARTUP_DIR}/xtensa_windowspill.o
${PX4_STARTUP_DIR}/xtensa_int_handlers.o
${PX4_STARTUP_DIR}/xtensa_user_handler.o
${PX4_STARTUP_DIR}/xtensa_initialize.o
${PX4_STARTUP_DIR}/xtensa_initialstate.o
${PX4_STARTUP_DIR}/esp32_start.o
${PX4_STARTUP_DIR}/esp32_wdt.o
)
set(NUTTX_NETWORK_LIB
libbtdm_app.a
libcoexist.a
libcore.a
libespnow.a
libnet80211.a
libphy.a
libpp.a
librtc.a
libsmartconfig.a
libwapi.a
libwpa_supplicant.a
)
execute_process(COMMAND touch ${NUTTX_STARTUP_OBJS}
WORKING_DIRECTORY ${PX4_SOURCE_DIR})
set_source_files_properties(
${NUTTX_STARTUP_OBJS}
PROPERTIES
EXTERNAL_OBJECT true
GENERATED true)
target_link_libraries(nuttx_c INTERFACE nuttx_sched) # nxsched_get_streams
target_link_libraries(nuttx_arch
INTERFACE
drivers_board
arch_hrt
arch_board_reset
-L${WIRELESS_LIB}
-Wl,--start-group
${NUTTX_NETWORK_LIB}
-Wl,--end-group
)
target_link_libraries(nuttx_c INTERFACE nuttx_drivers)
target_link_libraries(nuttx_drivers INTERFACE nuttx_c nuttx_fs)
target_link_libraries(nuttx_xx INTERFACE nuttx_c)
target_link_libraries(nuttx_fs INTERFACE nuttx_c nuttx_net)
target_link_libraries(nuttx_net INTERFACE nuttx_mm)
target_link_libraries(px4 PRIVATE
-nostartfiles
-nodefaultlibs
-nostdlib
-nostdinc++
-mlongcalls
-fno-exceptions
-fno-rtti
-Wl,--cref
-L${WIRELESS_LIB}
-Wl,-T${NUTTX_CONFIG_DIR_CYG}/scripts/${SCRIPT_PREFIX}esp32_out.ld
-T${NUTTX_CONFIG_DIR_CYG}/scripts/${SCRIPT_PREFIX}esp32.ld
-T${NUTTX_CONFIG_DIR_CYG}/scripts/${SCRIPT_PREFIX}esp32_rom.ld
-Wl,-Map=${PX4_CONFIG}.map
-Wl,--gc-sections
-Wl,--start-group
${nuttx_libs}
${NUTTX_STARTUP_OBJS}
${NUTTX_NETWORK_LIB}
-Wl,--end-group
m
gcc
)
if(NOT USE_LD_GOLD)
target_link_libraries(px4 PRIVATE -Wl,--print-memory-usage)
endif()
target_link_libraries(px4 PRIVATE ${module_libraries})
if(config_romfs_root)
add_subdirectory(${PX4_SOURCE_DIR}/ROMFS ${PX4_BINARY_DIR}/ROMFS)
target_link_libraries(px4 PRIVATE romfs)
endif()
add_custom_command(OUTPUT ${PX4_BINARY_OUTPUT}
COMMAND esptool --chip esp32 elf2image -o ${PX4_BINARY_OUTPUT} ${PX4_BINARY_DIR_REL}/${FW_NAME}
COMMAND du ${PX4_BINARY_OUTPUT} -h
DEPENDS px4
)
else()
target_link_libraries(nuttx_c INTERFACE nuttx_sched) # nxsched_get_streams
target_link_libraries(nuttx_arch
INTERFACE
drivers_board
arch_hrt
arch_board_reset
)
target_link_libraries(nuttx_c INTERFACE nuttx_drivers)
target_link_libraries(nuttx_drivers INTERFACE nuttx_c)
target_link_libraries(nuttx_xx INTERFACE nuttx_c)
target_link_libraries(nuttx_fs INTERFACE nuttx_c)
target_link_libraries(px4 PRIVATE
-nostartfiles
-nodefaultlibs
-nostdlib
-nostdinc++
-fno-exceptions
-fno-rtti
-Wl,--script=${NUTTX_CONFIG_DIR_CYG}/scripts/${SCRIPT_PREFIX}script.ld
-L${NUTTX_CONFIG_DIR_CYG}/scripts
-Wl,-Map=${PX4_CONFIG}.map
-Wl,--warn-common
-Wl,--gc-sections
-Wl,--start-group
${nuttx_libs}
-Wl,--end-group
m
gcc
)
if(NOT USE_LD_GOLD)
target_link_libraries(px4 PRIVATE -Wl,--print-memory-usage)
endif()
target_link_libraries(px4 PRIVATE ${module_libraries})
if(config_romfs_root)
add_subdirectory(${PX4_SOURCE_DIR}/ROMFS ${PX4_BINARY_DIR}/ROMFS)
target_link_libraries(px4 PRIVATE romfs)
endif()
add_custom_command(OUTPUT ${PX4_BINARY_OUTPUT}
COMMAND ${CMAKE_OBJCOPY} -O binary ${PX4_BINARY_DIR_REL}/${FW_NAME} ${PX4_BINARY_OUTPUT}
DEPENDS px4
)
endif()
endif()
# create .hex if configured in NuttX
if (CONFIG_INTELHEX_BINARY)
string(REPLACE ".elf" ".hex" hex_package ${PX4_BINARY_DIR}/${FW_NAME})
add_custom_command(
OUTPUT ${hex_package}
COMMAND
${CMAKE_OBJCOPY} -O ihex
${PX4_BINARY_DIR}/${PX4_CONFIG}.elf
${hex_package}
DEPENDS
${PX4_BINARY_DIR}/${PX4_CONFIG}.bin
airframes_xml
parameters_xml
COMMENT "Creating ${hex_package}"
WORKING_DIRECTORY ${PX4_BINARY_DIR}
)
add_custom_target(px4_hex ALL DEPENDS ${hex_package})
endif()
# create .px4 with parameter and airframe metadata
if (TARGET parameters_xml AND TARGET airframes_xml)
string(REPLACE ".elf" ".px4" fw_package ${PX4_BINARY_DIR}/${FW_NAME})
add_custom_command(
OUTPUT ${fw_package}
COMMAND
${PYTHON_EXECUTABLE} ${PX4_SOURCE_DIR}/Tools/px_mkfw.py
--prototype ${PX4_SOURCE_DIR}/boards/${PX4_BOARD_VENDOR}/${PX4_BOARD_MODEL}/firmware.prototype
--git_identity ${PX4_SOURCE_DIR}
--parameter_xml ${PX4_BINARY_DIR}/parameters.xml
--airframe_xml ${PX4_BINARY_DIR}/airframes.xml
--image ${PX4_BINARY_DIR}/${PX4_CONFIG}.bin > ${fw_package}
DEPENDS
${PX4_BINARY_DIR}/${PX4_CONFIG}.bin
airframes_xml
parameters_xml
COMMENT "Creating ${fw_package}"
WORKING_DIRECTORY ${PX4_BINARY_DIR}
)
add_custom_target(px4_package ALL DEPENDS ${fw_package})
# upload helper
# create upload target helper if NuttX USB CDCACM is present
if (CONFIG_CDCACM)
include(upload)
endif()
endif()
if(${CONFIG_NSH_LIBRARY} MATCHES "y")
if(${CONFIG_NSH_DISABLE_ECHO} MATCHES "y")
message(FATAL_ERROR "init scripts require NSH SET (board has CONFIG_NSH_DISABLE_ECHO=y)")
endif()
if(${CONFIG_NSH_DISABLE_SET} MATCHES "y")
message(FATAL_ERROR "init scripts require NSH SET (board has CONFIG_NSH_DISABLE_SET=y)")
endif()
if(${CONFIG_NSH_DISABLE_SLEEP} MATCHES "y")
message(FATAL_ERROR "init scripts require NSH SET (board has CONFIG_NSH_DISABLE_SLEEP=y)")
endif()
if(${CONFIG_NSH_DISABLE_SOURCE} MATCHES "y")
message(FATAL_ERROR "init scripts require NSH SET (board has CONFIG_NSH_DISABLE_SOURCE=y)")
endif()
endif()
if("${PX4_BOARD_LABEL}" STREQUAL "bootloader")
add_custom_command(OUTPUT ${PX4_BOARD_DIR}/extras/${PX4_BOARD}_bootloader.bin
COMMAND ${CMAKE_OBJCOPY} -O binary ${PX4_BINARY_DIR_REL}/${FW_NAME} ${PX4_BOARD_DIR}/extras/${PX4_BOARD}_bootloader.bin
DEPENDS px4
)
add_custom_target(px4_bootloader_keep ALL DEPENDS ${PX4_BOARD_DIR}/extras/${PX4_BOARD}_bootloader.bin)
endif()
# print weak symbols
add_custom_target(weak_symbols
COMMAND ${CMAKE_NM} $<TARGET_FILE:px4> | ${GREP} " w " | cat
DEPENDS px4
VERBATIM
USES_TERMINAL
)
# generate bootloader.elf and copy to top level build directory
if(NOT ("${PX4_BOARD_LABEL}" STREQUAL "bootloader") AND (EXISTS "${PX4_BOARD_DIR}/extras/${PX4_BOARD_VENDOR}_${PX4_BOARD_MODEL}_bootloader.bin"))
add_custom_command(
OUTPUT ${PX4_BINARY_DIR}/${PX4_BOARD_VENDOR}_${PX4_BOARD_MODEL}_bootloader.elf
COMMAND
${CMAKE_OBJCOPY} -I binary -O elf32-little --change-section-address .data=0x08000000
${PX4_BOARD_DIR}/extras/${PX4_BOARD_VENDOR}_${PX4_BOARD_MODEL}_bootloader.bin
${PX4_BINARY_DIR}/${PX4_BOARD_VENDOR}_${PX4_BOARD_MODEL}_bootloader.elf
DEPENDS ${PX4_BOARD_DIR}/extras/${PX4_BOARD_VENDOR}_${PX4_BOARD_MODEL}_bootloader.bin
WORKING_DIRECTORY ${PX4_BINARY_DIR}
)
add_custom_target(bootloader_elf DEPENDS ${PX4_BINARY_DIR}/${PX4_BOARD_VENDOR}_${PX4_BOARD_MODEL}_bootloader.elf)
endif()
# debugger helpers
configure_file(${CMAKE_CURRENT_SOURCE_DIR}/Debug/gdbinit.in ${PX4_BINARY_DIR}/.gdbinit)
# vscode launch.json
# skip if built within another cmake project (eg px4_io-v2 with px4_fmu-v5)
if(NOT NUTTX_DIR MATCHES "external")
if(CONFIG_ARCH_CHIP_MIMXRT1062DVL6A)
set(DEBUG_DEVICE "MIMXRT1062XXX6A")
set(DEBUG_SVD_FILE "MIMXRT1062.xml")
elseif(CONFIG_ARCH_CHIP_MIMXRT1176DVMAA)
set(DEBUG_DEVICE "MIMXRT1176DVMAA")
set(DEBUG_SVD_FILE "MIMXRT1176_cm7.xml")
elseif(CONFIG_ARCH_CHIP_MK66FN2M0VMD18)
set(DEBUG_DEVICE "MK66FN2M0xxx18")
set(DEBUG_SVD_FILE "MK66F18.svd")
elseif(CONFIG_ARCH_CHIP_S32K344)
set(DEBUG_DEVICE "S32K344")
set(DEBUG_SVD_FILE "S32K344_M7.svd")
elseif(CONFIG_ARCH_CHIP_STM32F100C8)
set(DEBUG_DEVICE "STM32F100C8")
set(DEBUG_SVD_FILE "STM32F100xx.svd")
elseif(CONFIG_ARCH_CHIP_STM32F103RB)
set(DEBUG_DEVICE "STM32F103C4")
set(DEBUG_SVD_FILE "STM32F103xx.svd")
elseif(CONFIG_ARCH_CHIP_STM32F302K8)
set(DEBUG_DEVICE "STM32F302K8")
set(DEBUG_SVD_FILE "STM32F302.svd")
elseif(CONFIG_ARCH_CHIP_STM32F303CC)
set(DEBUG_DEVICE "STM32F303CC")
set(DEBUG_SVD_FILE "STM32F303.svd")
elseif(CONFIG_ARCH_CHIP_STM32F405RG)
set(DEBUG_DEVICE "STM32F405RG")
set(DEBUG_SVD_FILE "STM32F405.svd")
elseif(CONFIG_ARCH_CHIP_STM32F412CE)
set(DEBUG_DEVICE "STM32F412CE")
set(DEBUG_SVD_FILE "STM32F412.svd")
elseif(CONFIG_ARCH_CHIP_STM32F427V)
set(DEBUG_DEVICE "STM32F427VI")
set(DEBUG_SVD_FILE "STM32F427.svd")
elseif(CONFIG_ARCH_CHIP_STM32F429V)
set(DEBUG_DEVICE "STM32F429VI")
set(DEBUG_SVD_FILE "STM32F429.svd")
elseif(CONFIG_ARCH_CHIP_STM32F446R)
set(DEBUG_DEVICE "STM32F446RC")
set(DEBUG_SVD_FILE "STM32F446.svd")
elseif(CONFIG_ARCH_CHIP_STM32F469I)
set(DEBUG_DEVICE "STM32F469II")
set(DEBUG_SVD_FILE "STM32F469.svd")
elseif(CONFIG_ARCH_CHIP_STM32F722RE)
set(DEBUG_DEVICE "STM32F722RE")
set(DEBUG_SVD_FILE "STM32F7x2.svd")
elseif(CONFIG_ARCH_CHIP_STM32F745VG)
set(DEBUG_DEVICE "STM32F745VG")
set(DEBUG_SVD_FILE "STM32F7x5.svd")
elseif(CONFIG_ARCH_CHIP_STM32F765II)
set(DEBUG_DEVICE "STM32F765II")
set(DEBUG_SVD_FILE "STM32F7x5.svd")
elseif(CONFIG_ARCH_CHIP_STM32F777NI)
set(DEBUG_DEVICE "STM32F777NI")
set(DEBUG_SVD_FILE "STM32F7x7.svd")
elseif(CONFIG_ARCH_CHIP_STM32H743VI)
set(DEBUG_DEVICE "STM32H743VI")
set(DEBUG_SVD_FILE "STM32H7x3.svd")
elseif(CONFIG_ARCH_CHIP_STM32H743II)
set(DEBUG_DEVICE "STM32H743II")
set(DEBUG_SVD_FILE "STM32H7x3.svd")
elseif(CONFIG_ARCH_CHIP_STM32H743XI)
set(DEBUG_DEVICE "STM32H743XI")
set(DEBUG_SVD_FILE "STM32H7x3.svd")
elseif(CONFIG_ARCH_CHIP_STM32H743ZI)
set(DEBUG_DEVICE "STM32H743ZI")
set(DEBUG_SVD_FILE "STM32H7x3.svd")
elseif(CONFIG_ARCH_CHIP_STM32H753II)
set(DEBUG_DEVICE "STM32H753II")
set(DEBUG_SVD_FILE "STM32H7x3.svd")
else()
set(DEBUG_DEVICE "")
set(DEBUG_SVD_FILE "unknown")
endif()
file(GLOB_RECURSE DEBUG_SVD_FILE_PATH
LIST_DIRECTORIES false
${CMAKE_SOURCE_DIR}/../cmsis-svd/data/*/${DEBUG_SVD_FILE}
${CMAKE_SOURCE_DIR}/../svd/${DEBUG_SVD_FILE}
)
if(CONFIG_DEBUG_TCBINFO)
# jlink-nuttx.so
add_custom_command(
OUTPUT ${NUTTX_DIR}/tools/jlink-nuttx.so
COMMAND make --no-print-directory --silent -f Makefile.host jlink-nuttx
DEPENDS ${NUTTX_DIR}/tools/jlink-nuttx.c
WORKING_DIRECTORY ${NUTTX_DIR}/tools
)
add_custom_target(jlink-nuttx ALL
DEPENDS ${NUTTX_DIR}/tools/jlink-nuttx.so
)
# JLINK_RTOS_PATH used by launch.json.in
set(JLINK_RTOS_PATH ${NUTTX_DIR}/tools/jlink-nuttx.so)
else()
set(JLINK_RTOS_PATH "")
endif()
if(DEBUG_SVD_FILE_PATH)
message(STATUS "Found SVD: ${DEBUG_SVD_FILE_PATH}")
endif()
if(NOT CMAKE_GDB)
find_program(CMAKE_GDB gdb-multiarch)
message(STATUS "Found GDB: ${CMAKE_GDB}")
endif()
if(DEBUG_DEVICE)
configure_file(${CMAKE_CURRENT_SOURCE_DIR}/Debug/launch.json.in ${PX4_SOURCE_DIR}/.vscode/launch.json @ONLY)
endif()
endif()
add_custom_target(debug
COMMAND ${CMAKE_GDB} -iex 'set auto-load safe-path ${PX4_BINARY_DIR}' $<TARGET_FILE:px4>
DEPENDS px4 ${PX4_BINARY_DIR}/.gdbinit
WORKING_DIRECTORY ${PX4_BINARY_DIR}
USES_TERMINAL
)
include(blackmagic)
include(jlink)
include(profile)
include(stack_check)
if(EXISTS "${PX4_BOARD_DIR}/cmake/upload.cmake")
include(${PX4_BOARD_DIR}/cmake/upload.cmake)
endif()
Reference in New Issue View Git Blame Copy Permalink