Files
PX4-Autopilot/test/mavsdk_tests/pytest.ini
T
Andrea BernasconiandHamish Willee db94ca49db feat(failure_injection): add wrong, garbage and drift IMU failures (#29601)
* feat(failure_injection): add wrong, garbage and drift injection for gyro and accel

Corrupt the addressed IMU's samples on all three axes: wrong adds a
constant bias (SYS_FAIL_{G,A}_BIAS), garbage uniform noise within
+-SYS_FAIL_{G,A}_NOISE and drift a bias growing by SYS_FAIL_{G,A}_DRIFT
per second since injection. Applied to both the plain and FIFO driver paths.

* refactor(failure_injection): handle IMU failures in process_imu()

Mirror process_gnss(): resolve the mode once, run the generic Off / Stuck
first and only then apply the Wrong / Garbage / Drift offset, so the Stuck
cache keeps the uncorrupted sample and a later Stuck never replays a
drifted one. Drop the second process() on the integrated FIFO report, which
cached the already-corrupted report. The offset is still computed before
Off so drift_start is reset while the sensor is off.

* docs(failure_injection): align IMU failure docs with code

The Syntax section did not list drift and described garbage as
uninitialised-memory output, while gyro/accel garbage adds bounded noise
to the real measurement. Also match the new parameter descriptions to
the wording of the existing SYS_FAIL_* parameters.

Assisted-by: Claude:claude-opus-5-5
Signed-off-by: Hamish Willee <hamishwillee@gmail.com>

* fix(failure_injection): add drift RC mode and clarify bias param text

* refactor(drivers): Drop extra comment

* test(mavsdk_tests): add SITL test for IMU failure injection

Fly the SIH quad through gyro and accel bias, noise and drift with the
default SYS_FAIL_{G,A}_* magnitudes and check it holds altitude.

Holding altitude alone also passes when the injection never reaches the
sensor data, so the test also checks that the IMU noise level jumps
while noise is injected and returns once cleared. Bias and drift are
not checked in the data: the rate controller and the estimator react
to them and partly hide them in flight.

Assisted-by: Claude:claude-opus-5-5
Signed-off-by: Andrea Bernasconi <andrea.bernasconi@auterion.com>

* test(mavsdk_tests): inject IMU failures through MAVSDK 4.2.0

MAVSDK-Python 4.2.0 adds FailureType.DRIFT (mavlink/MAVSDK#3211), so the
IMU failure test no longer needs to send a raw MAV_CMD_INJECT_FAILURE
with its own copies of the unit and type values. Use the tester's
inject_failure() like the motor failure tests, and bump the mavsdk pin
so the new type is available.

Assisted-by: Claude:claude-fable-5-2
Signed-off-by: Andrea Bernasconi <andrea.bernasconi@auterion.com>

---------

Signed-off-by: Hamish Willee <hamishwillee@gmail.com>
Signed-off-by: Andrea Bernasconi <andrea.bernasconi@auterion.com>
Co-authored-by: Hamish Willee <hamishwillee@gmail.com>
2026-11-13 11:24:05 +01:00

23 lines
1.0 KiB
INI

[pytest]
# Each test case is started by mavsdk_test_runner.py against a fresh PX4
# instance, see integration_test_runner/.
addopts = --strict-markers -p no:cacheprovider
norecursedirs = integration_test_runner catch2 configs
markers =
calibration: sensor calibration tests, posing the SIH vehicle
multicopter: multicopter tests
vtol: VTOL tests
offboard: offboard position/velocity control
offboard_attitude: offboard attitude control
vtol_wind: VTOL tests that need a windy world
vtol_airspeed_fail: VTOL airspeed failure tests
loiter: fixed-wing loiter tests
controlallocation: control allocation tests
motor_failure_injection: motor failure injection tests
imu_failure_injection: IMU (gyro/accel) failure injection tests
sih_home_yaw: SIH home yaw tests
sih_xvert_transition: SIH XVert transition tests
vision_target: vision target estimator precision landing tests
optical_flow: optical flow aided multicopter navigation tests
optical_flow_vtol: optical flow aided VTOL navigation tests