Files
PX4-Autopilot/platforms/nuttx/cmake
Peter van der PerkandAndre Heinemans 676b485702 feat(platform): add the NXP i.MX9 and i.MX95 NuttX platform layer
Add the PX4 arch layer for the i.MX9 family: ADC, HRT on LPTMR with
LPIT deadlines, TPM io timers, pin interrupts, LPSPI with chip selects
for all eight instances, critmon on the DWT cycle counter, a tone alarm
on a TPM channel, version reporting with the 128-bit ECID read from the
Fuse Status Block as the UUID, the board reset entry point, plus the
i.MX95 chip include set, the chip mapping in px4_impl_os.cmake and the
PX4_SOC_ARCH_ID_IMX95 id. DShot uses the shared NXP FlexIO driver with
the i.MX9 FlexIO base, offsets, IRQ, clock root and pad hooks.

Not implemented yet: reset of the M7 through the System Manager, LED
PWM and PWM input capture.

i.MX9 timer configs name their timers Timer::TPMn and mark DShot
capable ones with initIOTimerDshot(), so teach
output_groups_from_timer_config.py both forms.

Co-authored-by: Andre Heinemans <andre.heinemans@nxp.com>
2026-11-06 07:32:53 -08:00
..
2019-11-16 15:42:19 -05:00
2021-12-05 19:18:56 -05:00