mirror of
https://github.com/PX4/PX4-Autopilot.git
synced 2026-11-22 14:19:57 +08:00
On NuttX these are two things: / is the filesystem root, and /fs/microsd is the SD card mounted under it. MAVLink FTP serves the root and confines writes to the SD card, so the read-only ROMFS at /etc is visible but cannot be written. On POSIX they were the same directory. PX4_ROOTFSDIR and PX4_STORAGEDIR both resolved to CONFIG_BOARD_ROOT_PATH, which on SITL is ".", so the working directory was simultaneously the FTP root and the only writable area. The consequences were that the ROMFS symlink sat inside the FTP root, and that _validatePathIsWritable() had nothing meaningful to check against and so was compiled out on POSIX entirely, leaving no write restriction at all. Give POSIX the same split. CONFIG_BOARD_ROOT_PATH keeps its meaning as the storage directory, and a new CONFIG_BOARD_FS_ROOT_PATH names the root FTP serves, defaulting to the storage path so every existing board is unchanged. SITL sets the root to "." and storage to "./fs", which mirrors NuttX: logs, parameters, dataman and eeprom move under ./fs, and etc/ stays in the root as read-only data. With storage distinct from the root, the write restriction now applies on every platform rather than NuttX only, and no longer compares against a hardcoded prefix length that was wrong for any board not using /fs/microsd. Assisted-by: Claude:claude-opus-5[1m] Signed-off-by: Julian Oes <julian@oes.ch>
155 lines
5.3 KiB
C
155 lines
5.3 KiB
C
/****************************************************************************
|
|
*
|
|
* Copyright (c) 2014 PX4 Development Team. All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in
|
|
* the documentation and/or other materials provided with the
|
|
* distribution.
|
|
* 3. Neither the name PX4 nor the names of its contributors may be
|
|
* used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
****************************************************************************/
|
|
|
|
/**
|
|
* @file defines.h
|
|
*
|
|
* Generally used magic defines
|
|
*/
|
|
|
|
#pragma once
|
|
|
|
#include <sys/ioctl.h>
|
|
#include <px4_boardconfig.h>
|
|
|
|
|
|
/****************************************************************************
|
|
* Defines for all platforms.
|
|
****************************************************************************/
|
|
|
|
#define PX4_ERROR (-1)
|
|
#define PX4_OK 0
|
|
|
|
/* Define PX4_ISFINITE */
|
|
#ifdef __cplusplus
|
|
static inline constexpr bool PX4_ISFINITE(float x) { return __builtin_isfinite(x); }
|
|
static inline constexpr bool PX4_ISFINITE(double x) { return __builtin_isfinite(x); }
|
|
#else
|
|
#define PX4_ISFINITE(x) __builtin_isfinite(x)
|
|
#endif /* __cplusplus */
|
|
|
|
#if defined(__PX4_NUTTX)
|
|
/****************************************************************************
|
|
* NuttX specific defines.
|
|
****************************************************************************/
|
|
|
|
#define PX4_ROOTFSDIR ""
|
|
#define PX4_STORAGEDIR PX4_ROOTFSDIR CONFIG_BOARD_ROOT_PATH
|
|
#define _PX4_IOC(x,y) _IOC(x,y)
|
|
|
|
// mode for open with O_CREAT
|
|
#define PX4_O_MODE_777 0777
|
|
#define PX4_O_MODE_666 0666
|
|
#define PX4_O_MODE_600 0600
|
|
|
|
#elif defined(__PX4_POSIX)
|
|
/****************************************************************************
|
|
* POSIX Specific defines
|
|
****************************************************************************/
|
|
|
|
// Flag is meaningless on Linux
|
|
#ifndef O_BINARY
|
|
#define O_BINARY 0
|
|
#endif
|
|
|
|
// mode for open with O_CREAT
|
|
#define PX4_O_MODE_777 (S_IRWXU | S_IRWXG | S_IRWXO)
|
|
#define PX4_O_MODE_666 (S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP | S_IROTH | S_IWOTH )
|
|
#define PX4_O_MODE_600 (S_IRUSR | S_IWUSR)
|
|
|
|
// NuttX _IOC is equivalent to Linux _IO
|
|
#define _PX4_IOC(x,y) _IO(x,y)
|
|
|
|
#define USEC_PER_TICK (1000000/PX4_TICKS_PER_SEC)
|
|
#define USEC2TICK(x) (((x)+(USEC_PER_TICK/2))/USEC_PER_TICK)
|
|
|
|
__BEGIN_DECLS
|
|
extern long PX4_TICKS_PER_SEC;
|
|
__END_DECLS
|
|
|
|
// Kept separate as on NuttX: the root is what MAVLink FTP serves, the storage directory
|
|
// is the writable part of it (the SD card equivalent).
|
|
#define PX4_ROOTFSDIR CONFIG_BOARD_FS_ROOT_PATH
|
|
|
|
// Qurt doesn't have an SD card for storage
|
|
#ifndef __PX4_QURT
|
|
#define PX4_STORAGEDIR CONFIG_BOARD_ROOT_PATH
|
|
#endif
|
|
|
|
/****************************************************************************
|
|
* Defines for POSIX and ROS
|
|
****************************************************************************/
|
|
|
|
#define OK 0
|
|
#define ERROR -1
|
|
#define MAX_RAND 32767
|
|
|
|
#endif // defined(__PX4_POSIX)
|
|
|
|
/* Math macro's for float literals. Do not use M_PI et al as they aren't
|
|
* defined (neither C nor the C++ standard define math constants) */
|
|
#define M_E_F 2.71828183f
|
|
#define M_LOG2E_F 1.44269504f
|
|
#define M_LOG10E_F 0.43429448f
|
|
#define M_LN2_F 0.69314718f
|
|
#define M_LN10_F 2.30258509f
|
|
#define M_PI_F 3.14159265f
|
|
#define M_TWOPI_F 6.28318531f
|
|
#define M_PI_2_F 1.57079632f
|
|
#define M_PI_4_F 0.78539816f
|
|
#define M_3PI_4_F 2.35619449f
|
|
#define M_SQRTPI_F 1.77245385f
|
|
#define M_1_PI_F 0.31830989f
|
|
#define M_2_PI_F 0.63661977f
|
|
#define M_2_SQRTPI_F 1.12837917f
|
|
#define M_DEG_TO_RAD_F 0.0174532925f
|
|
#define M_RAD_TO_DEG_F 57.2957795f
|
|
#define M_SQRT2_F 1.41421356f
|
|
#define M_SQRT1_2_F 0.70710678f
|
|
#define M_LN2LO_F 1.90821484E-10f
|
|
#define M_LN2HI_F 0.69314718f
|
|
#define M_SQRT3_F 1.73205081f
|
|
#define M_IVLN10_F 0.43429448f // 1 / log(10)
|
|
#define M_LOG2_E_F 0.69314718f
|
|
#define M_INVLN2_F 1.44269504f // 1 / log(2)
|
|
|
|
/* The M_PI, as stated above, is not C standard. If you need it and
|
|
* it isn't in your math.h file then you can use this instead. */
|
|
#ifndef M_PI
|
|
#define M_PI 3.141592653589793238462643383279502884
|
|
#endif
|
|
|
|
#define M_DEG_TO_RAD 0.017453292519943295
|
|
#define M_RAD_TO_DEG 57.295779513082323
|
|
#define M_INH_TO_PA 249.089f
|