2.6 KiB
Посилання на модулі: Симуляція
:::info
This page is auto-generated from the source code using the build command: make module_documentation.
Do not edit it directly; fix the module documentation in the PX4-Autopilot source instead.
:::
simulator_sih
Source: modules/simulation/simulator_sih
Опис
Цей модуль надає симулятор для квадрокоптерів та фіксованих крил, що повністю працює всередині апаратного автопілота.
Цей симулятор підписується на "actuator_outputs", які є сигналами ШІМ, наданими модулем розподілу керування.
Цей симулятор публікує сигнали датчиків, спотворені реалістичним шумом, щоб включити оцінювання стану в петлю.
Імплементація
Симулятор реалізує рівняння руху за допомогою матричної алгебри.Використовується кватерніонне представлення для орієнтації.Для інтегрування використовується пряма схема Ейлера.Більшість змінних оголошуються глобальними в файлі .hpp, щоб уникнути переповнення стеку.
Приклади
Pose the vehicle on the ground for accel and mag calibration (SITL only), sides named as the calibration names them.
With rotate it turns about the vertical with a tilt swing, as the mag calibration asks for:
simulator_sih orient left rotate
Each side in turn: 10 s still, then 10 s rotating, then level. This completes either calibration.
simulator_sih orient all
Level the vehicle and resume the flight dynamics:
simulator_sih orient off
Usage
simulator_sih <command> [arguments...]
Commands:
start
[-t <val>] Terrain elevation GeoTIFF (DEM), SITL only
values: <file>
orient Pose the vehicle on the ground for calibration
down|up|front|back|left|right|all|off Side facing down, every side in turn,
or level
[rotate] Rotate about the vertical
stop
status print status info