Files
PX4-Autopilot/docs/en/flight_controller/corvon_743v2.md
T
Hamish Willee 860aca9864 docs(docs): fix broken links and missing uORB TOC entries (#28827)
* docs(msg): add missing uORB message pages to SUMMARY

The msg_docs block in SUMMARY.md is not regenerated by the metadata sync,
so seven message pages were unreachable from the sidebar (PageNotInTOC).
Replace the block with the fragment written by generate_msg_docs.py,
which also moves VehicleControlMode to the unversioned list.

Assisted-by: Claude:claude-opus-5-5
Signed-off-by: Hamish Willee <hamishwillee@gmail.com>

* docs: fix broken and permanently redirected external links

CUAV moved its docs to a /en/<product>/ layout, so the Nora, C-RTK 9Ps
and C-RTK2 links returned 404. Other vendor links (InvenSense, Bosch,
ARK, CORVON) permanently redirect; point them at the final URL.

Assisted-by: Claude:claude-opus-5-5
Signed-off-by: Hamish Willee <hamishwillee@gmail.com>

* docs: fix remaining dead external links

RaccoonLab's store product pages, the CubeNode pin descriptions,
wiki.ubuntu.com/LTS and the Bitbucket NuttX repos no longer resolve.
RaccoonLab now only has docs pages for these devices, so link those.

ubuntu.sh and macos.sh already install kconfig-frontends, so the NuttX
porting guide no longer tells Ubuntu users to build it from source; the
old steps are kept in a comment.

Assisted-by: Claude:claude-opus-5-5
Signed-off-by: Hamish Willee <hamishwillee@gmail.com>

* docs: ignore unresolvable external links for 6 months

These links fail the external link check for reasons a docs edit can't
fix: bot blocking (raccoonlab.co, gitlab.arm.com), expired vendor
certificates (svehicle.cn, jmarple.ai), and the ARKV6X-RT order link,
which is waiting on a replacement URL from ARK.

Assisted-by: Claude:claude-opus-5-5
Signed-off-by: Hamish Willee <hamishwillee@gmail.com>

---------

Signed-off-by: Hamish Willee <hamishwillee@gmail.com>
2026-09-24 09:55:45 +10:00

8.8 KiB
Raw Blame History

CORVON 743v2

:::warning PX4 does not manufacture this (or any) autopilot. Contact the manufacturer for hardware support or compliance issues. :::

The CORVON 743v2 is a flight controller designed by Feikong Technology Co., Ltd under the CORVON brand. It builds on the CORVON 743v1 platform with significantly upgraded sensor and connectivity options: dual high-grade IMUs (ICM-42688P + BMI088), a high-precision BMP581 barometer, a dedicated DJI O4 Air Unit connector, an onboard Bluetooth module with a ceramic antenna, and dual analog battery monitoring channels.

The board uses Pixhawk Autopilot Standard Connections.

::: info This flight controller is manufacturer supported. :::

Key Features

  • MCU: STM32H743VIH6 (32 Bit Arm® Cortex®-M7, 480 MHz, 2MB Flash, 1MB RAM, TFBGA100 package)
  • IMU (Dual): TDK InvenSense ICM-42688P (primary) + Bosch BMI088 accel/gyro (secondary)
  • Barometer: Bosch BMP581 (high-precision)
  • Magnetometer: iSentek IST8310
  • Interfaces:
    • 8x UARTs (including dedicated DJI O4 and Bluetooth ports)
    • 1x CAN (DroneCAN / UAVCAN)
    • 1x external I²C (with isolated 5V supply)
    • 1x dedicated RC Input (SBUS / CRSF / ELRS)
    • 12x PWM outputs (M1–M10 DShot-capable, M11 / M12 standard PWM for servos)
    • SDMMC1 4-bit Micro-SD slot (high-speed logging)
    • Dedicated DJI O4 Air Unit connector
    • Onboard Bluetooth module with ceramic antenna (UART8, MAVLink pre-configured)
  • Power:
    • Dual analog battery voltage/current channels (BAT1 via the PWM 4-in-1 ESC connector, BAT2 via B2V/B2I pads)
    • Voltage sensing up to 10S LiPo by default
    • On-board BECs for peripheral power (consult manufacturer for exact rail specifications)

Where to Buy

Order from CORVON.

Physical / Mechanical

Refer to the manufacturer's datasheet for the latest mechanical drawing, mounting pattern, and weight specifications.

Specifications

Processors & Sensors

  • FMU Processor: STM32H743VIH6
    • 32 Bit Arm® Cortex®-M7, 480 MHz
    • 2MB Flash, 1MB RAM
    • TFBGA100 (8 × 8 mm) package
  • On-board Sensors:
    • Accel/Gyro 1: TDK InvenSense ICM-42688P (SPI3)
    • Accel/Gyro 2: Bosch BMI088 (SPI3)
    • Barometer: Bosch BMP581 (I²C2, address 0x46)
    • Compass: iSentek IST8310 (I²C2, address 0x0E)

Power Configuration

The board provides two independent analog battery monitoring channels:

  • BAT1 - Battery voltage and current sensed from the PWM 4-in-1 ESC connector, on ADC1_INP10 (voltage) and ADC1_INP11 (current).
  • BAT2 - Auxiliary B2V / B2I solder pads for a second / redundant battery pack, sensed on ADC1_INP4 (voltage) and ADC1_INP8 (current).

Both channels feed PX4's standard analog battery driver with a default 21.2 voltage divider and 40 A/V current ratio, supporting up to 10S LiPo batteries out of the box.

::: info The board does not expose the 5V rail / system_power sensing pins that PX4's commander power checks expect, so CBRK_SUPPLY_CHK (894281) is set by default to bypass the power supply and battery health checks used for arming and failsafe decisions. BAT1/BAT2 voltage and current monitoring is unaffected. :::

Connectors & Pinouts

The following image shows the physical connector and solder-pad layout, with the labels used in this document and in the firmware's default.px4board:

CORVON 743v2 Ports & Connectors

The board exposes the following connectors and solder pads:

  • TELEM1 (4-pin) - primary MAVLink radio link
  • 04-AIR (6-pin) - DJI O4 Air Unit (Digital VTX with MSP DisplayPort)
  • GPS (6-pin JST-GH) - UBX / NMEA GPS, with the external compass I²C bus broken out on the same connector
  • TELEM2 (4-pin) - companion computer / secondary MAVLink
  • UART5 (4-pin) - generic auxiliary UART breakout
  • RCIN (4-pin) - SBUS / CRSF / ELRS receiver input
  • UART7 pads (TX7 / RX7) - ESC Telemetry
  • CAN (4-pin) - FDCAN1 (DroneCAN / UAVCAN)
  • I2C (4-pin) - external I²C, isolated 5V supply for short-circuit protection
  • PWM (8-pin) - 4-in-1 ESC connector (M1–M4 + power + ESC Telemetry)
  • Onboard Bluetooth module (UART8) with ceramic antenna - MAVLink pre-configured
  • SWD (4-pin) - hardware debug (SWCLK / SWDIO / 3V3 / GND)

The next image shows the individual solder-pad signal assignments on both the top and bottom of the board for advanced wiring (GPIO breakouts, ADC pads, etc.):

CORVON 743v2 Solder Pad Map

Standard Serial Port Mapping

Physical UART PCB Silk Label PX4 Slot (QGC) Default Usage
USART1 TELEM1 TELEM 1 MAVLink
USART2 04-AIR - DJI O4 Air Unit (MSP DisplayPort)
USART3 GPS GPS 1 GPS (plus external compass on shared I²C)
UART4 TELEM2 TELEM 2 MAVLink (Companion Link)
UART5 UART5 TELEM 3 User Auxiliary
USART6 RCIN RC RC Input (SBUS / CRSF / ELRS)
UART7 UART7 UART 6 ESC Telemetry
UART8 (onboard BT) TELEM 4 Bluetooth MAVLink @ 115200 (pre-configured)

::: tip The silk labels UART5 and UART7 on the PCB refer to the STM32H743's physical UART numbers. In QGroundControl these ports appear as TELEM 3 and UART 6 respectively, because of PX4's internal serial-slot abstraction. When assigning a service in QGroundControl, look up the silk label in the PCB Silk Label column to find the corresponding PX4 Slot name. :::

Debug Port

The board features a 4-pin SWD Debug interface (SWCLK / SWDIO / 3V3 / GND) for hardware debugging. There is no dedicated NSH console UART; the NSH console is exposed over USB CDC out of the box and is available via QGroundControl's MAVLink Console.

RC Input

RC Input is mapped to USART6 through the dedicated RCIN connector.

Both the receive line (RX6, internally invert-capable for SBUS) and the transmit line (TX6) are broken out, so the port supports:

  • Single-wire SBUS (inverted)
  • TBS Crossfire (CRSF)
  • ExpressLRS (ELRS)
  • FPort, Spektrum DSM, Graupner SUMD, and others

Configure the receiver protocol with the relevant RC_*_PRT_CFG parameter from QGroundControl, pointing it at the RC slot.

PWM Output Groups

The 12 PWM outputs are organized into four timer groups. Channels in the same group must use the same output rate and DShot mode:

Group Timer Channels Default Protocol
1 TIM1 M1–M4 DShot600
2 TIM3 M5–M6 DShot600
3 TIM4 M7–M10 DShot600
4 TIM12 M11–M12 PWM only (servo / gimbal)

M1–M9 support BDShot telemetry readback; M10 is DShot-only because TIM4_CH4 has no input-capture DMA channel on STM32H7. Bidirectional DShot can be enabled by setting PWM_MAIN_TIM0..2 to a BDShot value (-6 BDShot600, -7 BDShot300, -8 BDShot150) in QGroundControl.

Channels within the same group need to use the same output rate. If any channel in a group uses DShot then all channels in the group need to use DShot.

Bluetooth Telemetry (Pre-configured)

The board has an onboard Bluetooth module with a ceramic antenna, wired internally to UART8. The factory firmware pre-binds MAVLink instance 2 to this port at 115200 baud with no flow control, so the link works out of the box: just pair the board from a phone or tablet GCS - no QGroundControl parameter changes required.

Building / Loading Firmware

::: tip Most users will not need to build this firmware (from PX4 v1.18). It is pre-built and automatically installed by QGroundControl when appropriate hardware is connected. :::

To build PX4 for this target from source:

make corvon_743v2_default

Initial firmware flashing can be done over USB via QGroundControl. The bootloader status follows the standard generic PX4 LED indications (Red = Bootloader / Error, Blue = Active / Activity, Green = Powered).