mirror of
https://github.com/PX4/PX4-Autopilot.git
synced 2026-11-22 14:19:57 +08:00
Only the imx-image-ros image ships mavlink-router, and its main.conf exposes a UDP server on port 10000 instead of pushing to a ground station, on purpose, so Wi-Fi is not flooded with broadcast traffic. Say so, tell the reader to add the board as a UDP server in QGroundControl or to add a Normal endpoint for a fixed ground station, and point at the router's own endpoint documentation. /dev/ttyros existed but no PX4 module could use it: it was not a board serial port, so UXRCE_DDS_CFG could not select it and nothing started the client. Registering it as TELEM 2 lets the generated rc.serial start uxrce_dds_client on it from the parameter, like a companion link on any other board, with nothing enabled by default. Tested on the board: with UXRCE_DDS_CFG set to 102 the client starts at boot on /dev/ttyros at 921600 baud and its session frames arrive on the Linux side. The page gets a ROS 2 section with the three steps, and the agent install points at the uXRCE-DDS page since the Linux images do not ship it. Co-authored-by: Hamish Willee <hamishwillee@gmail.com>