2.1 KiB
Modules Reference: Simulation
::: info
This page is auto-generated from the source code using the build command: make module_documentation.
Do not edit it directly; fix the module documentation in the PX4-Autopilot source instead.
:::
simulator_sih
Source: modules/simulation/simulator_sih
Description
This module provides a simulator for quadrotors and fixed-wings running fully inside the hardware autopilot.
This simulator subscribes to "actuator_outputs" which are the actuator pwm signals given by the control allocation module.
This simulator publishes the sensors signals corrupted with realistic noise in order to incorporate the state estimator in the loop.
Implementation
The simulator implements the equations of motion using matrix algebra. Quaternion representation is used for the attitude. Forward Euler is used for integration. Most of the variables are declared global in the .hpp file to avoid stack overflow.
Examples
Pose the vehicle on the ground for accel and mag calibration (SITL only), sides named as the calibration names them.
With rotate it turns about the vertical with a tilt swing, as the mag calibration asks for:
simulator_sih orient left rotate
Each side in turn: 10 s still, then 10 s rotating, then level. This completes either calibration.
simulator_sih orient all
Level the vehicle and resume the flight dynamics:
simulator_sih orient off
Usage
simulator_sih <command> [arguments...]
Commands:
start
[-t <val>] Terrain elevation GeoTIFF (DEM), SITL only
values: <file>
orient Pose the vehicle on the ground for calibration
down|up|front|back|left|right|all|off Side facing down, every side in turn,
or level
[rotate] Rotate about the vertical
stop
status print status info