Files
PX4-Autopilot/src/drivers/uavcannode/UavcanNode.cpp
T
Daniel Buleandră 5f28bf9a86 feat(nsh via dronecan): Implement nsh via dronecan (#28403)
Queue unwritten stdin instead of dropping it when a request is larger
than the pipe can take at once, and drain the queue without blocking
the CAN work queue. Only stdin needs to stay nonblocking (it's written
from that work queue); stdout reads stay blocking, gated on FIONREAD,
like the mavlink shell already does.

Report a shell session that has exited as an explicit error instead of
silently swallowing EPIPE and returning empty output. Surface that
error in the Python client as well.

Flush the queued stdin on idle polls too, not just when new input
arrives, since an idle poll is all the client sends while the user
isn't typing. Only redirect fd 0/1 for the child once both stdio
backups succeeded, so a dup() failure can't leave the node's own
stdin/stdout pointing into the shell pipes. Distinguish EAGAIN (retry
later) from EPIPE (never will succeed) when flushing queued stdin, so
a dead shell doesn't hold the queue forever refusing new input.

Only compile the shell sources when CONFIG_UAVCANNODE_COMMAND_SHELL is
enabled, matching how every other optional uavcannode feature is
gated, instead of pulling nshlib into every board's image. Detect a
dead shell task with nxsched_get_tcb(), the same lookup top/cpuload.cpp
use, instead of a POSIX-only helper with no NuttX implementation. Fix
GetNodeInfo name decoding in the client to tolerate non-UTF-8 bytes
instead of crashing the scan.
Signed-off-by: danielbuleandra <daniel.buleandra@auterion.com>
2026-09-30 10:34:19 +02:00

1040 lines
28 KiB
C++

/****************************************************************************
*
* Copyright (c) 2015-2022 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
#include "UavcanNode.hpp"
#include "boot_app_shared.h"
#include "boot_alt_app_shared.h"
// Weak default: return the compile-time name from uavcan_board_identity.
// Boards that resolve the name at runtime can provide a strong override.
extern "C" __attribute__((weak)) const char *board_get_uavcan_hw_name(void)
{
return HW_UAVCAN_NAME;
}
#include <drivers/drv_watchdog.h>
#include <lib/geo/geo.h>
#include <lib/version/version.h>
#if defined(CONFIG_UAVCANNODE_COMMAND_SHELL)
#include <errno.h>
#endif // CONFIG_UAVCANNODE_COMMAND_SHELL
#if defined(CONFIG_UAVCANNODE_BATTERY_INFO)
#include "Publishers/BatteryInfo.hpp"
#endif // CONFIG_UAVCANNODE_BATTERY_INFO
#if defined(CONFIG_UAVCANNODE_ESC_STATUS)
#include "Publishers/ESCStatus.hpp"
#endif // CONFIG_UAVCANNODE_ESC_STATUS
#if defined(CONFIG_UAVCANNODE_FLOW_MEASUREMENT)
#include "Publishers/FlowMeasurement.hpp"
#endif // CONFIG_UAVCANNODE_FLOW_MEASUREMENT
#if defined(UAVCANNODE_HYGROMETER_MEASUREMENT)
#include "Publishers/HygrometerMeasurement.hpp"
#endif // UAVCANNODE_HYGROMETER_MEASUREMENT
#if defined(CONFIG_UAVCANNODE_GNSS_FIX)
#include "Publishers/GnssFix2.hpp"
#include "Publishers/GnssAuxiliary.hpp"
#endif // CONFIG_UAVCANNODE_GNSS_FIX
#if defined(CONFIG_UAVCANNODE_INDICATED_AIR_SPEED)
#include "Publishers/IndicatedAirspeed.hpp"
#endif // CONFIG_UAVCANNODE_INDICATED_AIR_SPEED
#if defined(CONFIG_UAVCANNODE_MAGNETIC_FIELD_STRENGTH)
#include "Publishers/MagneticFieldStrength2.hpp"
#endif // CONFIG_UAVCANNODE_MAGNETIC_FIELD_STRENGTH
#if defined(CONFIG_UAVCANNODE_RANGE_SENSOR_MEASUREMENT)
#include "Publishers/RangeSensorMeasurement.hpp"
#endif // CONFIG_UAVCANNODE_RANGE_SENSOR_MEASUREMENT
#if defined(CONFIG_UAVCANNODE_RAW_AIR_DATA)
#include "Publishers/RawAirData.hpp"
#endif // CONFIG_UAVCANNODE_RAW_AIR_DATA
#if defined(CONFIG_UAVCANNODE_RAW_IMU)
#include "Publishers/RawIMU.hpp"
#endif // CONFIG_UAVCANNODE_RAW_IMU
#if defined(CONFIG_UAVCANNODE_SAFETY_BUTTON)
#include "Publishers/SafetyButton.hpp"
#endif // CONFIG_UAVCANNODE_SAFETY_BUTTON
#if defined(CONFIG_UAVCANNODE_STATIC_PRESSURE)
#include "Publishers/StaticPressure.hpp"
#endif // CONFIG_UAVCANNODE_STATIC_PRESSURE
#if defined(CONFIG_UAVCANNODE_STATIC_TEMPERATURE)
#include "Publishers/StaticTemperature.hpp"
#endif // CONFIG_UAVCANNODE_STATIC_TEMPERATURE
#if defined(CONFIG_UAVCANNODE_ARMING_STATUS)
#include "Subscribers/ArmingStatus.hpp"
#endif // CONFIG_UAVCANNODE_ARMING_STATUS
#if defined(CONFIG_UAVCANNODE_BEEP_COMMAND)
#include "Subscribers/BeepCommand.hpp"
#endif // CONFIG_UAVCANNODE_BEEP_COMMAND
#if defined(CONFIG_UAVCANNODE_ESC_RAW_COMMAND)
#include "Subscribers/ESCRawCommand.hpp"
#endif // CONFIG_UAVCANNODE_ESC_RAW_COMMAND
#if defined(CONFIG_UAVCANNODE_LIGHTS_COMMAND)
#include "Subscribers/LightsCommand.hpp"
#endif // CONFIG_UAVCANNODE_LIGHTS_COMMAND
#if defined(CONFIG_UAVCANNODE_RTK_DATA)
#include "Publishers/RelPosHeading.hpp"
#include "Publishers/MovingBaselineData.hpp"
#include "Subscribers/MovingBaselineData.hpp"
#include "Subscribers/RTCMStream.hpp"
#endif // CONFIG_UAVCANNODE_RTK_DATA
#if defined(CONFIG_UAVCANNODE_SERVO_ARRAY_COMMAND)
#include "Subscribers/ServoArrayCommand.hpp"
#endif // CONFIG_UAVCANNODE_SERVO_ARRAY_COMMAND
#if defined(CONFIG_UAVCANNODE_HARDPOINT_COMMAND)
#include "Subscribers/HardpointCommand.hpp"
#endif // CONFIG_UAVCANNODE_HARDPOINT_COMMAND
using namespace time_literals;
namespace uavcannode
{
/**
* @file UavcanNode.cpp
*
* Implements basic functionality of UAVCAN node.
*
* @author Pavel Kirienko <pavel.kirienko@gmail.com>
* David Sidrane <david_s5@nscdg.com>
*/
/*
* This is the AppImageDescriptor used
* by the make_can_boot_descriptor.py tool to set
* the application image's descriptor so that the
* uavcan bootloader has the ability to validate the
* image crc, size etc of this application
*/
boot_app_shared_section app_descriptor_t AppDescriptor = {
.signature = APP_DESCRIPTOR_SIGNATURE,
{
0,
},
.image_size = 0,
.git_hash = 0,
.major_version = APP_VERSION_MAJOR,
.minor_version = APP_VERSION_MINOR,
.board_id = HW_VERSION_MAJOR << 8 | HW_VERSION_MINOR,
.reserved = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }
};
UavcanNode *UavcanNode::_instance;
UavcanNode::UavcanNode(CanInitHelper *can_init, uint32_t bitrate, uavcan::ICanDriver &can_driver,
uavcan::ISystemClock &system_clock) :
ScheduledWorkItem(MODULE_NAME, px4::wq_configurations::uavcan),
_node(can_driver, system_clock, _pool_allocator),
_time_sync_slave(_node),
_fw_update_listner(_node),
#if defined(CONFIG_UAVCANNODE_COMMAND_SHELL)
_command_shell_server(_node),
#endif // CONFIG_UAVCANNODE_COMMAND_SHELL
_param_server(_node),
_dyn_node_id_client(_node),
_reset_timer(_node)
{
int res = pthread_mutex_init(&_node_mutex, nullptr);
_can = can_init;
_bitrate = bitrate;
if (res < 0) {
std::abort();
}
// Ensure this param is marked as used
int32_t bitrate_temp = 0;
(void)param_get(param_find("CANNODE_BITRATE"), &bitrate_temp);
}
UavcanNode::~UavcanNode()
{
if (_instance) {
/* tell the task we want it to go away */
_task_should_exit.store(true);
ScheduleNow();
unsigned i = 10;
do {
/* wait 5ms - it should wake every 10ms or so worst-case */
usleep(5000);
if (--i == 0) {
break;
}
} while (_instance);
}
#if defined(CONFIG_UAVCANNODE_COMMAND_SHELL)
close_shell();
#endif // CONFIG_UAVCANNODE_COMMAND_SHELL
_publisher_list.clear();
_subscriber_list.clear();
perf_free(_cycle_perf);
perf_free(_interval_perf);
}
int UavcanNode::getHardwareVersion(uavcan::protocol::HardwareVersion &hwver)
{
if (UavcanNode::instance()) {
hwver.major = HW_VERSION_MAJOR;
hwver.minor = HW_VERSION_MINOR;
mfguid_t mfgid = {};
board_get_mfguid(mfgid);
uavcan::copy(mfgid, mfgid + sizeof(mfgid), hwver.unique_id.begin());
return 0;
}
return -1;
}
int UavcanNode::start(uavcan::NodeID node_id, uint32_t bitrate)
{
if (_instance != nullptr) {
PX4_WARN("Already started");
return -1;
}
static CanInitHelper *_can = nullptr;
if (_can == nullptr) {
_can = new CanInitHelper();
if (_can == nullptr) { // We don't have exceptions so bad_alloc cannot be thrown
PX4_ERR("Out of memory");
return -1;
}
}
// Node init
_instance = new UavcanNode(_can, bitrate, _can->driver, UAVCAN_DRIVER::SystemClock::instance());
if (_instance == nullptr) {
PX4_ERR("Out of memory");
return -1;
}
const int node_init_res = _instance->init(node_id, _can->driver.updateEvent());
if (node_init_res < 0) {
delete _instance;
_instance = nullptr;
PX4_ERR("Node init failed %i", node_init_res);
return node_init_res;
}
// Keep the bit rate for reboots on BenginFirmware updates
_instance->active_bitrate = bitrate;
_instance->ScheduleOnInterval(ScheduleIntervalMs * 1000);
return PX4_OK;
}
void UavcanNode::fill_node_info()
{
// software version
uavcan::protocol::SoftwareVersion swver;
// Extracting the first 8 hex digits of the git hash and converting them to int
char fw_git_short[9] = {};
std::memmove(fw_git_short, px4_firmware_version_string(), 8);
char *end = nullptr;
swver.vcs_commit = std::strtoul(fw_git_short, &end, 16);
swver.optional_field_flags |= swver.OPTIONAL_FIELD_FLAG_VCS_COMMIT;
swver.major = AppDescriptor.major_version;
swver.minor = AppDescriptor.minor_version;
swver.image_crc = AppDescriptor.image_crc;
_node.setSoftwareVersion(swver);
/* hardware version */
uavcan::protocol::HardwareVersion hwver;
getHardwareVersion(hwver);
_node.setHardwareVersion(hwver);
}
void UavcanNode::busevent_signal_trampoline()
{
if (_instance) {
// trigger the work queue (Note, this is called from IRQ context)
_instance->ScheduleNow();
}
}
static void cb_reboot(const uavcan::TimerEvent &)
{
watchdog_pet();
board_reset(0);
}
void UavcanNode::cb_beginfirmware_update(const uavcan::ReceivedDataStructure<UavcanNode::BeginFirmwareUpdate::Request>
&req, uavcan::ServiceResponseDataStructure<UavcanNode::BeginFirmwareUpdate::Response> &rsp)
{
static bool inprogress = false;
rsp.error = rsp.ERROR_UNKNOWN;
if (req.image_file_remote_path.path.size()) {
rsp.error = rsp.ERROR_IN_PROGRESS;
if (!inprogress) {
inprogress = true;
#if defined(SUPPORT_ALT_CAN_BOOTLOADER)
if (!board_booted_by_px4()) {
bootloader_alt_app_shared_t shared_alt{0};
shared_alt.fw_server_node_id = req.source_node_id;
shared_alt.node_id = _node.getNodeID().get();
strncat((char *)shared_alt.path, (const char *)req.image_file_remote_path.path.c_str(), sizeof(shared_alt.path) - 1);
bootloader_alt_app_shared_write(&shared_alt);
board_configure_reset(BOARD_RESET_MODE_CAN_BL, shared_alt.node_id);
}
#endif
bootloader_app_shared_t shared;
shared.bus_speed = active_bitrate;
shared.node_id = _node.getNodeID().get();
bootloader_app_shared_write(&shared, App);
//rgb_led(255, 128, 0, 5);
_reset_timer.setCallback(cb_reboot);
_reset_timer.startOneShotWithDelay(uavcan::MonotonicDuration::fromMSec(1000));
rsp.error = rsp.ERROR_OK;
}
}
}
#if defined(CONFIG_UAVCANNODE_COMMAND_SHELL)
void UavcanNode::close_shell()
{
delete _shell;
_shell = nullptr;
}
bool UavcanNode::shell_recv(const uavcan::ReceivedDataStructure<UavcanNode::AccessCommandShell::Request> &req)
{
// no early return on an empty request: write() flushes whatever is still queued,
// and an idle poll is the only thing that arrives while the user is not typing
uint8_t input_buf[decltype(req.input)::MaxSize];
for (size_t i = 0; i < req.input.size(); ++i) {
input_buf[i] = req.input[i];
}
return _shell->write(input_buf, req.input.size());
}
void UavcanNode::shell_send(uavcan::ServiceResponseDataStructure<UavcanNode::AccessCommandShell::Response> &rsp)
{
uint8_t output_buf[decltype(rsp.output)::MaxSize];
const size_t available = _shell->available();
// cap to the response's max payload size
const size_t to_read = math::min(available, sizeof(output_buf));
const size_t n = to_read > 0 ? _shell->read(output_buf, to_read) : 0;
for (size_t i = 0; i < n; ++i) {
rsp.output.push_back(output_buf[i]);
}
}
void UavcanNode::cb_access_command_shell(const uavcan::ReceivedDataStructure<UavcanNode::AccessCommandShell::Request>
&req, uavcan::ServiceResponseDataStructure<UavcanNode::AccessCommandShell::Response> &rsp)
{
const uavcan::NodeID source = req.getSrcNodeID();
// reset applies regardless of current owner; otherwise a single shared session
if ((req.flags & req.FLAG_RESET_SHELL) || (_shell != nullptr && _shell_owner != source)) {
close_shell();
}
if (_shell != nullptr && !_shell->is_running()) {
close_shell();
}
if (_shell == nullptr) {
_shell = new uavcannode::UavcanNodeShell();
if (_shell == nullptr || _shell->start() < 0) {
PX4_ERR("AccessCommandShell: failed to start shell");
delete _shell;
_shell = nullptr;
rsp.flags = rsp.FLAG_SHELL_ERROR;
return;
}
_shell_owner = source;
}
if (!shell_recv(req)) {
PX4_ERR("AccessCommandShell: shell stdin backed up, input dropped");
rsp.flags |= rsp.FLAG_SHELL_ERROR;
}
shell_send(rsp);
// shell_send() may not have drained everything that fit in one response
if (_shell->available() > 0) {
rsp.flags |= rsp.FLAG_HAS_PENDING_STDOUT;
}
}
#endif // CONFIG_UAVCANNODE_COMMAND_SHELL
int UavcanNode::init(uavcan::NodeID node_id, UAVCAN_DRIVER::BusEvent &bus_events)
{
_node.setName(board_get_uavcan_hw_name());
// Nonzero node_id came from the bootloader handoff or CANNODE_NODE_ID;
// zero means dynamic node ID allocation runs in Run()
if (node_id != 0) {
_node.setNodeID(node_id);
}
fill_node_info();
if (_fw_update_listner.start(BeginFirmwareUpdateCallBack(this, &UavcanNode::cb_beginfirmware_update)) < 0) {
PX4_ERR("firmware update listener start failed");
return PX4_ERROR;
}
#if defined(CONFIG_UAVCANNODE_COMMAND_SHELL)
if (_command_shell_server.start(AccessCommandShellCallback(this, &UavcanNode::cb_access_command_shell)) < 0) {
PX4_ERR("command shell server start failed");
return PX4_ERROR;
}
#endif // CONFIG_UAVCANNODE_COMMAND_SHELL
#if defined(CONFIG_UAVCANNODE_BATTERY_INFO)
_publisher_list.add(new BatteryInfo(this, _node));
#endif // CONFIG_UAVCANNODE_BATTERY_INFO
#if defined(CONFIG_UAVCANNODE_ESC_STATUS)
_publisher_list.add(new ESCStatus(this, _node));
#endif // CONFIG_UAVCANNODE_ESC_STATUS
#if defined(CONFIG_UAVCANNODE_FLOW_MEASUREMENT)
_publisher_list.add(new FlowMeasurement(this, _node));
#endif // CONFIG_UAVCANNODE_FLOW_MEASUREMENT
#if defined(UAVCANNODE_HYGROMETER_MEASUREMENT)
_publisher_list.add(new HygrometerMeasurement(this, _node));
#endif // UAVCANNODE_HYGROMETER_MEASUREMENT
#if defined(CONFIG_UAVCANNODE_GNSS_FIX)
_publisher_list.add(new GnssFix2(this, _node));
_publisher_list.add(new GnssAuxiliary(this, _node));
#endif // CONFIG_UAVCANNODE_GNSS_FIX
#if defined(CONFIG_UAVCANNODE_MAGNETIC_FIELD_STRENGTH)
int32_t cannode_pub_mag = 1;
param_get(param_find("CANNODE_PUB_MAG"), &cannode_pub_mag);
if (cannode_pub_mag == 1) {
_publisher_list.add(new MagneticFieldStrength2(this, _node));
}
#endif // CONFIG_UAVCANNODE_MAGNETIC_FIELD_STRENGTH
#if defined(CONFIG_UAVCANNODE_RANGE_SENSOR_MEASUREMENT)
_publisher_list.add(new RangeSensorMeasurement(this, _node));
#endif // CONFIG_UAVCANNODE_RANGE_SENSOR_MEASUREMENT
#if defined(CONFIG_UAVCANNODE_RAW_AIR_DATA)
_publisher_list.add(new RawAirData(this, _node));
#endif // CONFIG_UAVCANNODE_RAW_AIR_DATA
#if defined(CONFIG_UAVCANNODE_RAW_IMU)
int32_t cannode_pub_raw_imu = 0;
param_get(param_find("CANNODE_PUB_IMU"), &cannode_pub_raw_imu);
if (cannode_pub_raw_imu == 1) {
_publisher_list.add(new RawIMU(this, _node));
}
#endif // CONFIG_UAVCANNODE_RAW_IMU
#if defined(CONFIG_UAVCANNODE_RTK_DATA)
_publisher_list.add(new RelPosHeadingPub(this, _node));
int32_t cannode_pub_mbd = 0;
param_get(param_find("CANNODE_PUB_MBD"), &cannode_pub_mbd);
if (cannode_pub_mbd == 1) {
_publisher_list.add(new MovingBaselineDataPub(this, _node));
}
#endif // CONFIG_UAVCANNODE_RTK_DATA
#if defined(CONFIG_UAVCANNODE_SAFETY_BUTTON)
_publisher_list.add(new SafetyButton(this, _node));
#endif // CONFIG_UAVCANNODE_SAFETY_BUTTON
#if defined(CONFIG_UAVCANNODE_STATIC_PRESSURE) || defined(CONFIG_UAVCANNODE_STATIC_TEMPERATURE)
int32_t cannode_pub_bar = 1;
param_get(param_find("CANNODE_PUB_BAR"), &cannode_pub_bar);
#endif
#if defined(CONFIG_UAVCANNODE_STATIC_PRESSURE)
if (cannode_pub_bar == 1) {
_publisher_list.add(new StaticPressure(this, _node));
}
#endif // CONFIG_UAVCANNODE_STATIC_PRESSURE
#if defined(CONFIG_UAVCANNODE_STATIC_TEMPERATURE)
if (cannode_pub_bar == 1) {
_publisher_list.add(new StaticTemperature(this, _node));
}
#endif // CONFIG_UAVCANNODE_STATIC_TEMPERATURE
#if defined(CONFIG_UAVCANNODE_ARMING_STATUS)
_subscriber_list.add(new ArmingStatus(_node));
#endif // CONFIG_UAVCANNODE_ARMING_STATUS
#if defined(CONFIG_UAVCANNODE_BEEP_COMMAND)
_subscriber_list.add(new BeepCommand(_node));
#endif // CONFIG_UAVCANNODE_BEEP_COMMAND
#if defined(CONFIG_UAVCANNODE_ESC_RAW_COMMAND)
_subscriber_list.add(new ESCRawCommand(_node));
#endif // CONFIG_UAVCANNODE_ESC_RAW_COMMAND
#if defined(CONFIG_UAVCANNODE_LIGHTS_COMMAND)
_subscriber_list.add(new LightsCommand(_node));
#endif // CONFIG_UAVCANNODE_LIGHTS_COMMAND
#if defined(CONFIG_UAVCANNODE_RTK_DATA)
int32_t cannode_sub_mbd = 0;
param_get(param_find("CANNODE_SUB_MBD"), &cannode_sub_mbd);
if (cannode_sub_mbd == 1) {
_subscriber_list.add(new MovingBaselineData(_node));
}
int32_t cannode_sub_rtcm = 0;
param_get(param_find("CANNODE_SUB_RTCM"), &cannode_sub_rtcm);
if (cannode_sub_rtcm == 1) {
_subscriber_list.add(new RTCMStream(_node));
}
#endif // CONFIG_UAVCANNODE_RTK_DATA
#if defined(CONFIG_UAVCANNODE_SERVO_ARRAY_COMMAND)
_subscriber_list.add(new ServoArrayCommand(_node));
#endif // CONFIG_UAVCANNODE_SERVO_ARRAY_COMMAND
#if defined(CONFIG_UAVCANNODE_HARDPOINT_COMMAND)
_subscriber_list.add(new HardpointCommand(_node));
#endif // CONFIG_UAVCANNODE_HARDPOINT_COMMAND
for (auto &subscriber : _subscriber_list) {
subscriber->init();
}
_log_message_sub.registerCallback();
bus_events.registerSignalCallback(UavcanNode::busevent_signal_trampoline);
return 1;
}
// Restart handler
class RestartRequestHandler: public uavcan::IRestartRequestHandler
{
bool handleRestartRequest(uavcan::NodeID request_source) override
{
PX4_INFO("UAVCAN: Restarting by request from %i\n", int(request_source.get()));
usleep(20 * 1000 * 1000);
board_reset(0);
return true; // Will never be executed BTW
}
} restart_request_handler;
void UavcanNode::Run()
{
static hrt_abstime up_time{0};
pthread_mutex_lock(&_node_mutex);
// Bootloader started it.
watchdog_pet();
switch (_init_state) {
case Booted: {
const int can_init_res = _can->init((uint32_t)_bitrate);
if (can_init_res < 0) {
PX4_ERR("CAN driver init failed %i", can_init_res);
ScheduleClear();
return;
}
int rv = _node.start();
if (rv < 0) {
PX4_ERR("Failed to start the node");
ScheduleClear();
return;
}
// If the node_id was not supplied by the bootloader do Dynamic Node ID allocation
if (_node.getNodeID() != 0) {
_init_state = Allocated;
} else {
_init_state = Allocation;
int client_start_res = _dyn_node_id_client.start(
_node.getHardwareVersion().unique_id, // USING THE SAME UNIQUE ID AS ABOVE
_node.getNodeID());
if (client_start_res < 0) {
PX4_ERR("Failed to start the dynamic node ID client");
ScheduleClear();
return;
}
}
}
break;
case Allocation:
/*
* Waiting for the client to obtain a node ID.
* This may take a few seconds.
*/
if (_dyn_node_id_client.isAllocationComplete()) {
PX4_INFO("Assigned node ID %d", _dyn_node_id_client.getAllocatedNodeID().get());
_node.setNodeID(_dyn_node_id_client.getAllocatedNodeID());
_init_state = Allocated;
}
break;
case Allocated:
if (_node.getNodeID() != 0) {
up_time = hrt_absolute_time();
get_node().setRestartRequestHandler(&restart_request_handler);
_param_server.start(&_param_manager);
// Set up the time synchronization
const int slave_init_res = _time_sync_slave.start();
if (slave_init_res < 0) {
PX4_ERR("Failed to start time_sync_slave");
_task_should_exit.store(true);
}
}
_node.getLogger().setLevel(uavcan::protocol::debug::LogLevel::DEBUG);
_node.setModeOperational();
_init_state = Done;
default:
break;
}
perf_begin(_cycle_perf);
perf_count(_interval_perf);
// check for parameter updates
if (_parameter_update_sub.updated()) {
// clear update
parameter_update_s pupdate;
_parameter_update_sub.copy(&pupdate);
// update parameters from storage
}
_node.spinOnce();
for (auto &publisher : _publisher_list) {
publisher->BroadcastAnyUpdates();
}
if (_log_message_sub.updated()) {
log_message_s log_message;
if (_log_message_sub.copy(&log_message)) {
char source[31] {};
char text[90] {};
bool text_copied = false;
if (log_message.text[0] == '[') {
// find closing bracket ]
for (size_t i = 0; i < strlen(log_message.text); i++) {
if (log_message.text[i] == ']') {
// copy [MODULE_NAME] to source
memcpy(source, &log_message.text[1], i - 1);
// copy remaining text (skipping space after [])
memcpy(text, &log_message.text[i + 2], math::min(sizeof(log_message.text) - (i + 2), sizeof(text)));
text_copied = true;
}
}
}
if (!text_copied) {
memcpy(text, log_message.text, sizeof(text));
}
switch (log_message.severity) {
case 7: // debug
_node.getLogger().logDebug(source, text);
break;
case 6: // info
_node.getLogger().logInfo(source, text);
break;
case 4: // warn
_node.getLogger().logWarning(source, text);
break;
case 3: // error
_node.getLogger().logError(source, text);
break;
case 0: // panic
_node.getLogger().logError(source, text);
break;
default:
_node.getLogger().logInfo(source, text);
break;
}
}
}
_node.spinOnce();
// This is done only once to signify the node has run 30 seconds
if (up_time && hrt_elapsed_time(&up_time) > 30_s) {
up_time = 0;
board_configure_reset(BOARD_RESET_MODE_RTC_BOOT_FWOK, 0);
}
perf_end(_cycle_perf);
pthread_mutex_unlock(&_node_mutex);
if (_task_should_exit.load()) {
ScheduleClear();
_instance = nullptr;
}
}
void UavcanNode::PrintInfo()
{
pthread_mutex_lock(&_node_mutex);
// Firmware version
printf("Hardware and software status:\n");
printf("\tNode ID: %d\n", int(_node.getNodeID().get()));
printf("\tHardware version: %d.%d\n",
int(_node.getHardwareVersion().major),
int(_node.getHardwareVersion().minor));
printf("\tSoftware version: %d.%d.%08x\n",
int(_node.getSoftwareVersion().major),
int(_node.getSoftwareVersion().minor),
int(_node.getSoftwareVersion().vcs_commit));
printf("\n");
// Memory status
printf("Pool allocator status:\n");
printf("\tCapacity hard/soft: %u/%u blocks\n",
_pool_allocator.getBlockCapacityHardLimit(), _pool_allocator.getBlockCapacity());
printf("\tReserved: %u blocks\n", _pool_allocator.getNumReservedBlocks());
printf("\tAllocated: %u blocks\n", _pool_allocator.getNumAllocatedBlocks());
printf("\n");
// UAVCAN node perfcounters
printf("UAVCAN node status:\n");
printf("\tInternal failures: %llu\n", _node.getInternalFailureCount());
printf("\tTransfer errors: %llu\n", _node.getDispatcher().getTransferPerfCounter().getErrorCount());
printf("\tRX transfers: %llu\n", _node.getDispatcher().getTransferPerfCounter().getRxTransferCount());
printf("\tTX transfers: %llu\n", _node.getDispatcher().getTransferPerfCounter().getTxTransferCount());
printf("\n");
// UAVCAN Time
printf("UAVCAN Time:\n");
printf("\tMonotonic time: %llu\n", _node.getMonotonicTime().toUSec());
printf("\tUtc time: %llu\n", _node.getUtcTime().toUSec());
#if defined(UAVCAN_KINETIS_NUTTX) || defined(UAVCAN_STM32_NUTTX) || defined(UAVCAN_STM32H7_NUTTX)
const uavcan_hrt_clock::SyncStatus sync = UAVCAN_DRIVER::clock::getSyncStatus();
printf("\tSync: %lu adjustments, last %ld us, rate %ld ppb\n", (unsigned long)sync.adjustments,
(long)sync.last_adjustment_usec, (long)sync.rate_ppb);
#endif
printf("\n");
// CAN driver status
for (unsigned i = 0; i < _node.getDispatcher().getCanIOManager().getCanDriver().getNumIfaces(); i++) {
printf("CAN%u status:\n", unsigned(i + 1));
auto iface = _node.getDispatcher().getCanIOManager().getCanDriver().getIface(i);
printf("\tHW errors: %llu\n", iface->getErrorCount());
auto iface_perf_cnt = _node.getDispatcher().getCanIOManager().getIfacePerfCounters(i);
printf("\tIO errors: %llu\n", iface_perf_cnt.errors);
printf("\tRX frames: %llu\n", iface_perf_cnt.frames_rx);
printf("\tTX frames: %llu\n", iface_perf_cnt.frames_tx);
}
printf("\n");
printf("Publishers:\n");
for (const auto &publisher : _publisher_list) {
publisher->PrintInfo();
}
printf("\n");
printf("Subscribers:\n");
for (const auto &subscriber : _subscriber_list) {
subscriber->PrintInfo();
}
printf("\n");
perf_print_counter(_cycle_perf);
perf_print_counter(_interval_perf);
pthread_mutex_unlock(&_node_mutex);
}
void UavcanNode::shrink()
{
(void)pthread_mutex_lock(&_node_mutex);
_pool_allocator.shrink();
(void)pthread_mutex_unlock(&_node_mutex);
}
} // namespace uavcannode
static void print_usage()
{
PX4_INFO("usage: \n"
"\tuavcannode {start|status|stop|arm|disarm}");
}
extern "C" int uavcannode_start(int argc, char *argv[])
{
//board_app_initialize(nullptr);
// Sarted byt the bootloader, we must pet it
watchdog_pet();
#if defined(GPIO_CAN_TERM)
int32_t can_term = 0;
param_get(param_find("CANNODE_TERM"), &can_term);
if (can_term != 0) {
px4_arch_gpiowrite(GPIO_CAN_TERM, true);
} else {
px4_arch_gpiowrite(GPIO_CAN_TERM, false);
}
#endif
// CAN bitrate
int32_t bitrate = 0;
// Node ID
int32_t node_id = 0;
// Did the bootloader auto baud and get a node ID Allocated
int valid = -1;
bootloader_app_shared_t shared;
if (board_app_shared_read) {
valid = board_app_shared_read(&shared, BootLoader);
} else {
valid = bootloader_app_shared_read(&shared, BootLoader);
}
// Consume the region even when the handoff is rejected below: on boards
// booted by a non-PX4 bootloader nothing else ever invalidates it
if (valid == 0) {
bootloader_app_shared_invalidate();
}
// Trust the handoff only if it carries a plausible bitrate (CANNODE_BITRATE
// minimum), healing regions poisoned by firmware running previous code
if (valid == 0 && shared.bus_speed >= 20000) {
bitrate = shared.bus_speed;
node_id = shared.node_id;
} else {
// Node ID
#if defined(SUPPORT_ALT_CAN_BOOTLOADER)
if (!board_booted_by_px4()) {
node_id = 0;
bitrate = 1000000;
} else
#endif
{
(void)param_get(param_find("CANNODE_BITRATE"), &bitrate);
}
}
// CANNODE_NODE_ID == 0 (default) keeps dynamic node ID allocation, reusing an ID the
// bootloader may have already allocated. 1..125 sets a static node ID, overriding
// anything the bootloader negotiated. The bootloader never sees this parameter: it
// learns our node ID only through the firmware update handoff in cb_beginfirmware_update.
int32_t cannode_node_id = 0;
param_get(param_find("CANNODE_NODE_ID"), &cannode_node_id);
if (cannode_node_id < 0 || cannode_node_id > uavcan::NodeID::MaxRecommendedForRegularNodes) {
PX4_ERR("Invalid CANNODE_NODE_ID %" PRId32 ", ignoring", cannode_node_id);
} else if (cannode_node_id > 0) {
node_id = cannode_node_id;
}
if (
#if defined(SUPPORT_ALT_CAN_BOOTLOADER)
board_booted_by_px4() &&
#endif
(node_id < 0 || node_id > uavcan::NodeID::Max)) {
PX4_ERR("Invalid Node ID %" PRId32, node_id);
return 1;
}
// Start
PX4_INFO("Node ID %" PRId32 ", bitrate %" PRId32, node_id, bitrate);
int rv = uavcannode::UavcanNode::start(node_id, bitrate);
return rv;
}
extern "C" __EXPORT int uavcannode_main(int argc, char *argv[])
{
if (argc < 2) {
print_usage();
return 1;
}
if (!std::strcmp(argv[1], "start")) {
if (uavcannode::UavcanNode::instance()) {
PX4_ERR("already started");
return 1;
}
return uavcannode_start(argc, argv);
}
/* commands below require the app to be started */
uavcannode::UavcanNode *const inst = uavcannode::UavcanNode::instance();
if (!inst) {
PX4_ERR("application not running");
return 1;
}
if (!std::strcmp(argv[1], "status") || !std::strcmp(argv[1], "info")) {
if (inst) {
inst->PrintInfo();
}
return 0;
}
if (!std::strcmp(argv[1], "stop")) {
delete inst;
return 0;
}
print_usage();
return 1;
}