mirror of
https://github.com/PX4/PX4-Autopilot.git
synced 2026-11-22 14:19:57 +08:00
* fix(mc_nn_control): reject a model the module cannot feed The documentation tells users to swap the model array in control_net.cpp, and the module then wrote 15 floats into whatever input tensor came back and read 4 outputs from whatever output tensor came back, with no check of either. A model with a different input width would write past the tensor in the arena with no diagnostic. Reported in #28417. Check the schema version before the interpreter is built on the model, then the number of input and output tensors and the element count and type of each, and refuse to start with the reason in the log when they do not match. The checks live in a header without module dependencies so they can be unit tested, and the operator registration moves to a header so a test can load the shipped model through the real interpreter. Assisted-by: Claude:claude-fable-5 Signed-off-by: Saibernard Yogendran <bernie97@seas.upenn.edu> * fix(mc_nn_control): guard the observations and the network output The network was fed whatever the position and attitude topics last held, with no check of the validity flags, the age or finiteness, and its output went to the motors with any non finite channel mapped to a stopped motor while the other three kept thrusting. Reported in #28417. Check the observations on every cycle, in the mode or not: the position validity flags, the age of position, attitude and angular velocity against the same limits the raptor module uses, and finiteness. The network is not run on observations that fail, and a non finite output is not sent. In both cases the last command of this session is repeated, which is what the mixer would apply anyway, and the arming check reply says the mode cannot run, so the commander leaves it through its own fallback within one of its external check intervals. The repeat keeps the actuator topic and the lockstep simulators going, which wait for an output on every step. The first fault of an outage is reported once. A non finite output is reported once and the network is not trusted again until the mode has been left. The module runs on angular velocity updates, so a lost angular velocity stream would never have woken it. It is now a scheduled work item that re-arms a delayed run on every cycle, which keeps it registering, checking and answering the commander when the updates stop. The trajectory setpoint starts unset and is reset to the current position when the mode is entered without one. Before, the member was never initialized and the reset only happened when a position update landed on the same cycle as the first angular velocity update. In SIH, a GPS loss while flying the neural mode produced the fault event the same instant the position validity dropped, inference stopped, and the commander was in Descend within its next check. A gyro loss on a real time build produced the fault event 20 ms after the last sample and the commander was in failsafe 150 ms later. Assisted-by: Claude:claude-fable-5 Signed-off-by: Saibernard Yogendran <bernie97@seas.upenn.edu> * test(mc_nn_control): cover the model, observation and output checks Eleven cases on the checks the module runs before trusting its model, its observations and its output: every position validity flag, each staleness limit at its boundary and pinned to the raptor module's values, never set and future stamps, non finite values in each observation, the order in which faults are reported, every channel of the output, and every way a model can fail the layout check. One more loads the shipped model through the real interpreter and runs the module's layout check on it, so a swapped model array the module cannot feed fails here before it fails on a vehicle. Assisted-by: Claude:claude-fable-5 Signed-off-by: Saibernard Yogendran <bernie97@seas.upenn.edu> * fix(mc_nn_control): start the observation caches empty The three cached observations were plain members, so the first observation check read whatever the memory held before any of the topics had published, and a stream that had not arrived could pass that first check by chance. They start empty now, which the first check reports as an invalid position. A functional test builds the module in storage filled beforehand and runs the check with nothing published. Assisted-by: Claude:claude-fable-5-1 Signed-off-by: Saibernard Yogendran <bernie97@seas.upenn.edu> * ci(tests): run every mc_nn_control test in tests_neural The default filter of the target only matched the first test of the module. It now selects every test of the module, and it is quoted so the shell does not read the alternation as a pipe. Assisted-by: Claude:claude-fable-5-1 Signed-off-by: Saibernard Yogendran <bernie97@seas.upenn.edu> --------- Signed-off-by: Saibernard Yogendran <bernie97@seas.upenn.edu>
707 lines
31 KiB
Makefile
707 lines
31 KiB
Makefile
############################################################################
|
|
#
|
|
# Copyright (c) 2015 - 2024 PX4 Development Team. All rights reserved.
|
|
#
|
|
# Redistribution and use in source and binary forms, with or without
|
|
# modification, are permitted provided that the following conditions
|
|
# are met:
|
|
#
|
|
# 1. Redistributions of source code must retain the above copyright
|
|
# notice, this list of conditions and the following disclaimer.
|
|
# 2. Redistributions in binary form must reproduce the above copyright
|
|
# notice, this list of conditions and the following disclaimer in
|
|
# the documentation and/or other materials provided with the
|
|
# distribution.
|
|
# 3. Neither the name PX4 nor the names of its contributors may be
|
|
# used to endorse or promote products derived from this software
|
|
# without specific prior written permission.
|
|
#
|
|
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
|
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
|
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
|
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
|
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
|
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
|
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
# POSSIBILITY OF SUCH DAMAGE.
|
|
#
|
|
############################################################################
|
|
|
|
# Enforce the presence of the GIT repository
|
|
#
|
|
# We depend on our submodules, so we have to prevent attempts to
|
|
# compile without it being present.
|
|
ifeq ($(wildcard .git),)
|
|
$(error YOU HAVE TO USE GIT TO DOWNLOAD THIS REPOSITORY. ABORTING.)
|
|
endif
|
|
|
|
# Help
|
|
# --------------------------------------------------------------------
|
|
# Don't be afraid of this makefile, it is just passing
|
|
# arguments to cmake to allow us to keep the wiki pages etc.
|
|
# that describe how to build the px4 firmware
|
|
# the same even when using cmake instead of make.
|
|
#
|
|
# Example usage:
|
|
#
|
|
# make px4_fmu-v2_default (builds)
|
|
# make px4_fmu-v2_default upload (builds and uploads)
|
|
# make px4_fmu-v2_default test (builds and tests)
|
|
#
|
|
# This tells cmake to build the nuttx px4_fmu-v2 default config in the
|
|
# directory build/px4_fmu-v2_default and then call make
|
|
# in that directory with the target upload.
|
|
|
|
# explicity set default build target
|
|
all: px4_sitl_default
|
|
|
|
# define a space character to be able to explicitly find it in strings
|
|
space := $(subst ,, )
|
|
|
|
define make_list
|
|
$(shell [ -f .github/workflows/compile_${1}.yml ] && cat .github/workflows/compile_${1}.yml | sed -E 's|[[:space:]]+(.*),|check_\1|g' | grep check_${2})
|
|
endef
|
|
|
|
# Parsing
|
|
# --------------------------------------------------------------------
|
|
# assume 1st argument passed is the main target, the
|
|
# rest are arguments to pass to the makefile generated
|
|
# by cmake in the subdirectory
|
|
FIRST_ARG := $(firstword $(MAKECMDGOALS))
|
|
ARGS := $(wordlist 2,$(words $(MAKECMDGOALS)),$(MAKECMDGOALS))
|
|
|
|
# Get -j or --jobs argument as suggested in:
|
|
# https://stackoverflow.com/a/33616144/8548472
|
|
MAKE_PID := $(shell echo $$PPID)
|
|
j := $(shell ps T | sed -n 's|.*$(MAKE_PID).*$(MAKE).* \(-j\|--jobs\) *\([0-9][0-9]*\).*|\2|p')
|
|
|
|
# Default j for clang-tidy
|
|
j_clang_tidy := $(or $(j),4)
|
|
|
|
NINJA_BIN := ninja
|
|
ifndef NO_NINJA_BUILD
|
|
NINJA_BUILD := $(shell $(NINJA_BIN) --version 2>/dev/null)
|
|
|
|
ifndef NINJA_BUILD
|
|
NINJA_BIN := ninja-build
|
|
NINJA_BUILD := $(shell $(NINJA_BIN) --version 2>/dev/null)
|
|
endif
|
|
endif
|
|
|
|
ifdef NINJA_BUILD
|
|
PX4_CMAKE_GENERATOR := Ninja
|
|
PX4_MAKE := $(NINJA_BIN)
|
|
|
|
ifdef VERBOSE
|
|
PX4_MAKE_ARGS := -v
|
|
else
|
|
PX4_MAKE_ARGS :=
|
|
endif
|
|
|
|
# Only override ninja default if -j is set.
|
|
ifneq ($(j),)
|
|
PX4_MAKE_ARGS := $(PX4_MAKE_ARGS) -j$(j)
|
|
endif
|
|
else
|
|
ifdef SYSTEMROOT
|
|
# Windows
|
|
PX4_CMAKE_GENERATOR := "MSYS\ Makefiles"
|
|
else
|
|
PX4_CMAKE_GENERATOR := "Unix\ Makefiles"
|
|
endif
|
|
|
|
# For non-ninja builds we default to -j4
|
|
j := $(or $(j),4)
|
|
PX4_MAKE = $(MAKE)
|
|
PX4_MAKE_ARGS = -j$(j) --no-print-directory
|
|
endif
|
|
|
|
SRC_DIR := $(shell dirname "$(realpath $(lastword $(MAKEFILE_LIST)))")
|
|
|
|
# check if replay env variable is set & set build dir accordingly
|
|
ifdef replay
|
|
BUILD_DIR_SUFFIX := _replay
|
|
else
|
|
BUILD_DIR_SUFFIX :=
|
|
endif
|
|
|
|
CMAKE_ARGS ?=
|
|
|
|
# additional config parameters passed to cmake
|
|
ifdef EXTERNAL_MODULES_LOCATION
|
|
override CMAKE_ARGS += -DEXTERNAL_MODULES_LOCATION:STRING=$(EXTERNAL_MODULES_LOCATION)
|
|
endif
|
|
|
|
ifdef PX4_CMAKE_BUILD_TYPE
|
|
override CMAKE_ARGS += -DCMAKE_BUILD_TYPE=${PX4_CMAKE_BUILD_TYPE}
|
|
else
|
|
|
|
# Address Sanitizer
|
|
ifdef PX4_ASAN
|
|
override CMAKE_ARGS += -DCMAKE_BUILD_TYPE=AddressSanitizer
|
|
endif
|
|
|
|
# Memory Sanitizer
|
|
ifdef PX4_MSAN
|
|
override CMAKE_ARGS += -DCMAKE_BUILD_TYPE=MemorySanitizer
|
|
endif
|
|
|
|
# Thread Sanitizer
|
|
ifdef PX4_TSAN
|
|
override CMAKE_ARGS += -DCMAKE_BUILD_TYPE=ThreadSanitizer
|
|
endif
|
|
|
|
# Undefined Behavior Sanitizer
|
|
ifdef PX4_UBSAN
|
|
override CMAKE_ARGS += -DCMAKE_BUILD_TYPE=UndefinedBehaviorSanitizer
|
|
endif
|
|
|
|
endif
|
|
|
|
# Prefer the interpreter from an active Python virtual environment.
|
|
# Otherwise leave PYTHON_EXECUTABLE unset and let CMake resolve Python.
|
|
ifneq ($(strip $(VIRTUAL_ENV)),)
|
|
PYTHON_EXECUTABLE ?= $(VIRTUAL_ENV)/bin/python
|
|
endif
|
|
|
|
# Pick up specific Python path if set
|
|
ifdef PYTHON_EXECUTABLE
|
|
override CMAKE_ARGS += -DPYTHON_EXECUTABLE=${PYTHON_EXECUTABLE}
|
|
endif
|
|
|
|
# Functions
|
|
# --------------------------------------------------------------------
|
|
# describe how to build a cmake config
|
|
define cmake-build
|
|
# Strip BUILD_DIR_SUFFIX (e.g. _replay, _failsafe_web) from CONFIG so the
|
|
# board lookup in cmake/px4_config.cmake sees the bare <vendor>_<model>_<label>
|
|
# even when the build dir is suffixed for variant builds.
|
|
$(eval override CMAKE_ARGS += -DCONFIG=$(patsubst %$(BUILD_DIR_SUFFIX),%,$(1)))
|
|
@$(eval BUILD_DIR = "$(SRC_DIR)/build/$(1)")
|
|
@# check if the desired cmake configuration matches the cache then CMAKE_CACHE_CHECK stays empty
|
|
@$(call cmake-cache-check)
|
|
@# NuttX builds into the shared submodule trees under platforms/nuttx/NuttX/{nuttx,apps},
|
|
@# not into build/$(1)/. Recursive make there does not treat PX4 defconfig changes as a
|
|
@# reason to recompile, so switching board configs links stale objects (e.g. kmm_* from a
|
|
@# protected build into a flat build). Wipe the submodules when the active target changes,
|
|
@# mirroring Tools/ci/build_all_runner.sh.
|
|
@mkdir -p "$(SRC_DIR)/build"
|
|
@stamp="$(SRC_DIR)/build/.last_target"; \
|
|
prev=$$(cat "$$stamp" 2>/dev/null || echo ""); \
|
|
if [ "$$prev" != "$(1)" ]; then \
|
|
[ -n "$$prev" ] && echo "switching NuttX target $$prev -> $(1): wiping submodule state"; \
|
|
git -C "$(SRC_DIR)/platforms/nuttx/NuttX/nuttx" clean -dXfq 2>/dev/null || true; \
|
|
git -C "$(SRC_DIR)/platforms/nuttx/NuttX/apps" clean -dXfq 2>/dev/null || true; \
|
|
echo "$(1)" > "$$stamp"; \
|
|
fi
|
|
@# make sure to start from scratch when switching from GNU Make to Ninja
|
|
@if [ $(PX4_CMAKE_GENERATOR) = "Ninja" ] && [ -e $(BUILD_DIR)/Makefile ]; then rm -rf $(BUILD_DIR); fi
|
|
@# make sure to start from scratch if ninja build file is missing
|
|
@if [ $(PX4_CMAKE_GENERATOR) = "Ninja" ] && [ ! -f $(BUILD_DIR)/build.ninja ]; then rm -rf $(BUILD_DIR); fi
|
|
@# only excplicitly configure the first build, if cache file already exists the makefile will rerun cmake automatically if necessary
|
|
@if [ ! -e $(BUILD_DIR)/CMakeCache.txt ] || [ $(CMAKE_CACHE_CHECK) ]; then \
|
|
mkdir -p $(BUILD_DIR) \
|
|
&& cd $(BUILD_DIR) \
|
|
&& cmake "$(SRC_DIR)" -G"$(PX4_CMAKE_GENERATOR)" $(CMAKE_ARGS) \
|
|
|| (rm -rf $(BUILD_DIR)); \
|
|
fi
|
|
@# run the build for the specified target
|
|
@cmake --build $(BUILD_DIR) -- $(PX4_MAKE_ARGS) $(ARGS)
|
|
endef
|
|
|
|
# check if the options we want to build with in CMAKE_ARGS match the ones which are already configured in the cache inside BUILD_DIR
|
|
define cmake-cache-check
|
|
@# change to build folder which fails if it doesn't exist and CACHED_CMAKE_OPTIONS stays empty
|
|
@# fetch all previously configured and cached options from the build folder and transform them into the OPTION=VALUE format without type (e.g. :BOOL)
|
|
@$(eval CACHED_CMAKE_OPTIONS = $(shell cd $(BUILD_DIR) 2>/dev/null && cmake -L 2>/dev/null | sed -n 's|\([^[:blank:]]*\):[^[:blank:]]*\(=[^[:blank:]]*\)|\1\2|gp' ))
|
|
@# transform the options in CMAKE_ARGS into the OPTION=VALUE format without -D
|
|
@$(eval DESIRED_CMAKE_OPTIONS = $(shell echo $(CMAKE_ARGS) | sed -n 's|-D\([^[:blank:]]*=[^[:blank:]]*\)|\1|gp' ))
|
|
@# find each currently desired option in the already cached ones making sure the complete configured string value is the same
|
|
@$(eval VERIFIED_CMAKE_OPTIONS = $(foreach option,$(DESIRED_CMAKE_OPTIONS),$(strip $(findstring $(option)$(space),$(CACHED_CMAKE_OPTIONS)))))
|
|
@# if the complete list of desired options is found in the list of verified options we don't need to reconfigure and CMAKE_CACHE_CHECK stays empty
|
|
@$(eval CMAKE_CACHE_CHECK = $(if $(findstring $(DESIRED_CMAKE_OPTIONS),$(VERIFIED_CMAKE_OPTIONS)),,y))
|
|
endef
|
|
|
|
COLOR_BLUE = \033[0;94m
|
|
NO_COLOR = \033[m
|
|
|
|
define colorecho
|
|
+@echo -e '${COLOR_BLUE}${1} ${NO_COLOR}'
|
|
endef
|
|
|
|
# Get a list of all config targets boards/*/*.px4board
|
|
ALL_CONFIG_TARGETS := $(shell find boards -maxdepth 3 -mindepth 3 -name '*.px4board' -print | sed -e 's|boards\/||' | sed -e 's|\.px4board||' | sed -e 's|\/|_|g' | sort)
|
|
|
|
# ADD CONFIGS HERE
|
|
# --------------------------------------------------------------------
|
|
# Do not put any spaces between function arguments.
|
|
|
|
# All targets.
|
|
$(ALL_CONFIG_TARGETS):
|
|
@$(call cmake-build,$@$(BUILD_DIR_SUFFIX))
|
|
|
|
# Filter for only default targets to allow omiting the "_default" postfix
|
|
CONFIG_TARGETS_DEFAULT := $(patsubst %_default,%,$(filter %_default,$(ALL_CONFIG_TARGETS)))
|
|
$(CONFIG_TARGETS_DEFAULT):
|
|
@$(call cmake-build,$@_default$(BUILD_DIR_SUFFIX))
|
|
|
|
# Multi-processor boards: build all processor targets together
|
|
# VOXL2 apps processor (default) depends on SLPI DSP being built first
|
|
modalai_voxl2_default: modalai_voxl2_slpi
|
|
modalai_voxl2: modalai_voxl2_slpi
|
|
modalai_voxl2_deb: modalai_voxl2_slpi
|
|
|
|
all_config_targets: $(ALL_CONFIG_TARGETS)
|
|
all_default_targets: $(CONFIG_TARGETS_DEFAULT)
|
|
|
|
# DEB package targets: builds _default config, then runs cpack.
|
|
# Multi-processor boards (e.g. VOXL2) chain companion builds automatically
|
|
# via existing cmake prerequisites.
|
|
%_deb:
|
|
@$(call cmake-build,$(subst _deb,_default,$@)$(BUILD_DIR_SUFFIX))
|
|
@cd "$(SRC_DIR)/build/$(subst _deb,_default,$@)" && cpack -G DEB
|
|
|
|
updateconfig:
|
|
@./Tools/kconfig/updateconfig.py
|
|
|
|
# board reorganization deprecation warnings (2018-11-22)
|
|
define deprecation_warning
|
|
$(warning $(1) has been deprecated and will be removed, please use $(2)!)
|
|
endef
|
|
|
|
# All targets with just dependencies but no recipe must either be marked as phony (or have the special @: as recipe).
|
|
.PHONY: all px4_sitl_default all_config_targets all_default_targets
|
|
|
|
# Other targets
|
|
# --------------------------------------------------------------------
|
|
|
|
.PHONY: qgc_firmware px4fmu_firmware misc_qgc_extra_firmware
|
|
|
|
# QGroundControl flashable NuttX firmware
|
|
qgc_firmware: px4fmu_firmware misc_qgc_extra_firmware
|
|
|
|
# px4fmu NuttX firmware
|
|
px4fmu_firmware: \
|
|
check_px4_io-v2_default \
|
|
check_px4_fmu-v2_default \
|
|
check_px4_fmu-v3_default \
|
|
check_px4_fmu-v4_default \
|
|
check_px4_fmu-v4pro_default \
|
|
check_px4_fmu-v5_default \
|
|
check_px4_fmu-v5x_default \
|
|
sizes
|
|
|
|
misc_qgc_extra_firmware: \
|
|
check_nxp_fmuk66-v3_default \
|
|
check_mro_x21_default \
|
|
check_bitcraze_crazyflie_default \
|
|
check_bitcraze_crazyflie21_default \
|
|
check_airmind_mindpx-v2_default \
|
|
sizes
|
|
|
|
.PHONY: sizes check quick_check uorb_graphs
|
|
|
|
sizes:
|
|
@-find build -name *.elf -type f | xargs size 2> /dev/null || :
|
|
|
|
# All default targets that don't require a special build environment
|
|
check: check_px4_sitl_default px4fmu_firmware misc_qgc_extra_firmware tests check_format
|
|
|
|
# quick_check builds a single nuttx and SITL target, runs testing, and checks the style
|
|
quick_check: check_px4_sitl_test check_px4_fmu-v5_default tests check_format
|
|
|
|
check_%:
|
|
@echo
|
|
$(call colorecho,'Building' $(subst check_,,$@))
|
|
@$(MAKE) --no-print-directory $(subst check_,,$@)
|
|
@echo
|
|
|
|
all_variants_%:
|
|
@echo 'Building all $(subst all_variants_,,$@) variants:' $(filter $(subst all_variants_,,$@)_%, $(ALL_CONFIG_TARGETS))
|
|
@echo
|
|
$(foreach a,$(filter $(subst all_variants_,,$@)_%, $(ALL_CONFIG_TARGETS)), $(call cmake-build,$(a)$(BUILD_DIR_SUFFIX)))
|
|
|
|
uorb_graphs:
|
|
@./Tools/uorb_graph/create.py --src-path src --exclude-path src/examples --exclude-path src/lib/parameters --merge-depends --file Tools/uorb_graph/graph_full
|
|
@./Tools/uorb_graph/create.py --src-path src --exclude-path src/examples --exclude-path src/lib/parameters --exclude-path src/modules/mavlink --merge-depends --file Tools/uorb_graph/graph_full_no_mavlink
|
|
@$(MAKE) --no-print-directory px4_fmu-v2_default uorb_graph
|
|
@$(MAKE) --no-print-directory px4_fmu-v4_default uorb_graph
|
|
@$(MAKE) --no-print-directory px4_fmu-v5_default uorb_graph
|
|
@$(MAKE) --no-print-directory px4_fmu-v5x_default uorb_graph
|
|
@$(MAKE) --no-print-directory px4_fmu-v6x_default uorb_graph
|
|
@$(MAKE) --no-print-directory px4_sitl_default uorb_graph
|
|
|
|
px4io_update:
|
|
@$(MAKE) --no-print-directory px4_io-v2_default
|
|
@$(MAKE) --no-print-directory cubepilot_io-v2_default
|
|
# px4_io-v2_default
|
|
cp build/px4_io-v2_default/px4_io-v2_default.bin boards/ark/fmu-v6x/extras/px4_io-v2_default.bin
|
|
cp build/px4_io-v2_default/px4_io-v2_default.bin boards/holybro/durandal-v1/extras/px4_io-v2_default.bin
|
|
cp build/px4_io-v2_default/px4_io-v2_default.bin boards/holybro/pix32v5/extras/px4_io-v2_default.bin
|
|
cp build/px4_io-v2_default/px4_io-v2_default.bin boards/mro/x21/extras/px4_io-v2_default.bin
|
|
cp build/px4_io-v2_default/px4_io-v2_default.bin boards/mro/x21-777/extras/px4_io-v2_default.bin
|
|
cp build/px4_io-v2_default/px4_io-v2_default.bin boards/px4/fmu-v2/extras/px4_io-v2_default.bin
|
|
cp build/px4_io-v2_default/px4_io-v2_default.bin boards/px4/fmu-v3/extras/px4_io-v2_default.bin
|
|
cp build/px4_io-v2_default/px4_io-v2_default.bin boards/px4/fmu-v4pro/extras/px4_io-v2_default.bin
|
|
cp build/px4_io-v2_default/px4_io-v2_default.bin boards/px4/fmu-v5/extras/px4_io-v2_default.bin
|
|
cp build/px4_io-v2_default/px4_io-v2_default.bin boards/px4/fmu-v5x/extras/px4_io-v2_default.bin
|
|
cp build/px4_io-v2_default/px4_io-v2_default.bin boards/px4/fmu-v6x/extras/px4_io-v2_default.bin
|
|
cp build/px4_io-v2_default/px4_io-v2_default.bin boards/px4/fmu-v6c/extras/px4_io-v2_default.bin
|
|
# cubepilot_io-v2_default
|
|
cp build/cubepilot_io-v2_default/cubepilot_io-v2_default.bin boards/cubepilot/cubeorange/extras/cubepilot_io-v2_default.bin
|
|
cp build/cubepilot_io-v2_default/cubepilot_io-v2_default.bin boards/cubepilot/cubeorangeplus/extras/cubepilot_io-v2_default.bin
|
|
cp build/cubepilot_io-v2_default/cubepilot_io-v2_default.bin boards/cubepilot/cubeyellow/extras/cubepilot_io-v2_default.bin
|
|
git status
|
|
|
|
bootloaders_update: \
|
|
3dr_ctrl-n1_bootloader \
|
|
3dr_ctrl-zero-h7-oem-revg_bootloader \
|
|
ark_fmu-v6x_bootloader \
|
|
ark_fpv_bootloader \
|
|
ark_pi6x_bootloader \
|
|
auterion_fmu-v6s_bootloader \
|
|
auterion_fmu-v6x_bootloader \
|
|
cuav_nora_bootloader \
|
|
cuav_x7pro_bootloader \
|
|
cuav_7-nano_bootloader \
|
|
cuav_fmu-v6x_bootloader \
|
|
cuav_x25-evo_bootloader \
|
|
cuav_x25-super_bootloader \
|
|
cuav_x25-mega_bootloader \
|
|
cubepilot_cubeorange_bootloader \
|
|
cubepilot_cubeorangeplus_bootloader \
|
|
hkust_nxt-dual_bootloader \
|
|
hkust_nxt-v1_bootloader \
|
|
holybro_durandal-v1_bootloader \
|
|
holybro_kakuteh7_bootloader \
|
|
holybro_kakuteh7mini_bootloader \
|
|
holybro_kakuteh7v2_bootloader \
|
|
matek_h743_bootloader \
|
|
matek_h743-mini_bootloader \
|
|
matek_h743-slim_bootloader \
|
|
micoair_h743_bootloader \
|
|
micoair_h743-aio_bootloader \
|
|
micoair_h743-v2_bootloader \
|
|
micoair_h743-lite_bootloader \
|
|
modalai_fc-v2_bootloader \
|
|
mro_ctrl-zero-classic_bootloader \
|
|
mro_ctrl-zero-h7_bootloader \
|
|
mro_ctrl-zero-h7-oem_bootloader \
|
|
mro_pixracerpro_bootloader \
|
|
narinfc_h7_bootloader \
|
|
px4_fmu-v6c_bootloader \
|
|
px4_fmu-v6u_bootloader \
|
|
px4_fmu-v6x_bootloader \
|
|
px4_fmu-v6xrt_bootloader \
|
|
siyi_n7_bootloader
|
|
git status
|
|
|
|
.PHONY: coverity_scan
|
|
|
|
coverity_scan: px4_sitl_default
|
|
|
|
# Documentation
|
|
# --------------------------------------------------------------------
|
|
.PHONY: parameters_metadata airframe_metadata module_documentation extract_events px4_metadata
|
|
|
|
parameters_metadata:
|
|
@$(MAKE) --no-print-directory px4_sitl_default metadata_parameters ver_gen
|
|
|
|
airframe_metadata:
|
|
@$(MAKE) --no-print-directory px4_sitl_default metadata_airframes ver_gen
|
|
|
|
module_documentation:
|
|
@$(MAKE) --no-print-directory px4_sitl_default metadata_module_documentation
|
|
|
|
extract_events:
|
|
@$(MAKE) --no-print-directory px4_sitl_default metadata_extract_events ver_gen
|
|
|
|
px4_metadata: parameters_metadata airframe_metadata module_documentation extract_events
|
|
|
|
# Style
|
|
# --------------------------------------------------------------------
|
|
.PHONY: check_format format format_changed check_newlines
|
|
|
|
check_format:
|
|
$(call colorecho,'Checking formatting with astyle')
|
|
@"$(SRC_DIR)"/Tools/astyle/check_code_style_all.sh
|
|
@cd "$(SRC_DIR)" && git diff --check
|
|
|
|
format:
|
|
$(call colorecho,'Formatting with astyle')
|
|
@"$(SRC_DIR)"/Tools/astyle/check_code_style_all.sh --fix
|
|
|
|
format_changed:
|
|
$(call colorecho,'Formatting changed files with astyle')
|
|
@"$(SRC_DIR)"/Tools/astyle/check_code_style_all.sh --fix --diff-only
|
|
|
|
check_newlines:
|
|
$(call colorecho,'Checking for missing or duplicate newlines at the end of files')
|
|
@"$(SRC_DIR)"/Tools/astyle/check_newlines.sh
|
|
|
|
# Testing
|
|
# --------------------------------------------------------------------
|
|
.PHONY: tests tests_daa_crosstrack tests_vtest_moving tests_neural tests_coverage tests_mission tests_mission_coverage tests_offboard
|
|
.PHONY: rostest python_coverage
|
|
|
|
tests:
|
|
$(eval override CMAKE_ARGS += -DTESTFILTER=$(TESTFILTER))
|
|
$(eval ARGS += test_results)
|
|
$(eval ASAN_OPTIONS += color=always:check_initialization_order=1:detect_stack_use_after_return=1)
|
|
$(eval UBSAN_OPTIONS += color=always)
|
|
$(call cmake-build,px4_sitl_test)
|
|
|
|
# The default px4_sitl_test board builds the F3442 DAA standard.
|
|
# This target builds the crosstrack DAA standard (CONFIG_NAVIGATOR_ADSB_F3442=n).
|
|
tests_daa_crosstrack:
|
|
$(eval override CMAKE_ARGS += -DTESTFILTER=$(if $(TESTFILTER),$(TESTFILTER),'detect_and_avoid|DaaCrosstrack|AdsbConflict|DaaActionPolicy|DaaEncodedId'))
|
|
$(eval override CMAKE_ARGS += -DCMAKE_TESTING=ON)
|
|
$(eval ARGS += test_results)
|
|
$(eval ASAN_OPTIONS += color=always:check_initialization_order=1:detect_stack_use_after_return=1)
|
|
$(eval UBSAN_OPTIONS += color=always)
|
|
$(call cmake-build,px4_sitl_test-daa-crosstrack)
|
|
|
|
tests_vtest_moving:
|
|
$(eval override CMAKE_ARGS += -DTESTFILTER=$(if $(TESTFILTER),$(TESTFILTER),VTE))
|
|
$(eval override CMAKE_ARGS += -DCMAKE_TESTING=ON)
|
|
$(eval ARGS += test_results)
|
|
$(eval ASAN_OPTIONS += color=always:check_initialization_order=1:detect_stack_use_after_return=1)
|
|
$(eval UBSAN_OPTIONS += color=always)
|
|
$(call cmake-build,px4_sitl_vtest-moving)
|
|
|
|
# This target builds the neural configuration, the only one that enables mc_nn_control.
|
|
tests_neural:
|
|
$(eval override CMAKE_ARGS += -DTESTFILTER="$(if $(TESTFILTER),$(TESTFILTER),RescaleAction|NnControl)")
|
|
$(eval override CMAKE_ARGS += -DCMAKE_TESTING=ON)
|
|
$(eval ARGS += test_results)
|
|
$(eval ASAN_OPTIONS += color=always:check_initialization_order=1:detect_stack_use_after_return=1)
|
|
$(eval UBSAN_OPTIONS += color=always)
|
|
$(call cmake-build,px4_sitl_neural)
|
|
|
|
# work around lcov bug #316; remove once lcov is fixed (see https://github.com/linux-test-project/lcov/issues/316)
|
|
LCOBUG = --ignore-errors mismatch,negative
|
|
tests_coverage:
|
|
@$(MAKE) clean
|
|
@$(MAKE) --no-print-directory tests PX4_CMAKE_BUILD_TYPE=Coverage
|
|
@mkdir -p coverage
|
|
@lcov --directory build/px4_sitl_test \
|
|
--base-directory build/px4_sitl_test \
|
|
--gcov-tool gcov \
|
|
--capture \
|
|
$(LCOBUG) \
|
|
-o coverage/lcov.info
|
|
|
|
|
|
rostest: px4_sitl_default
|
|
@$(MAKE) --no-print-directory px4_sitl_default sitl_gazebo-classic
|
|
|
|
tests_integration: px4_sitl_default
|
|
@$(MAKE) --no-print-directory px4_sitl_default mavsdk_tests
|
|
@"$(SRC_DIR)"/test/mavsdk_tests/mavsdk_test_runner.py --speed-factor 20 test/mavsdk_tests/configs/sih-sitl.json
|
|
|
|
tests_integration_coverage:
|
|
@$(MAKE) clean
|
|
@$(MAKE) --no-print-directory px4_sitl_default PX4_CMAKE_BUILD_TYPE=Coverage
|
|
@$(MAKE) --no-print-directory px4_sitl_default mavsdk_tests
|
|
@"$(SRC_DIR)"/test/mavsdk_tests/mavsdk_test_runner.py --speed-factor 20 test/mavsdk_tests/configs/sih-sitl.json
|
|
@mkdir -p coverage
|
|
@lcov --directory build/px4_sitl_default --base-directory build/px4_sitl_default --gcov-tool gcov --capture -o coverage/lcov.info
|
|
|
|
tests_mission: rostest
|
|
@"$(SRC_DIR)"/test/rostest_px4_run.sh mavros_posix_tests_missions.test
|
|
|
|
rostest_run: px4_sitl_default
|
|
@$(MAKE) --no-print-directory px4_sitl_default sitl_gazebo-classic
|
|
@"$(SRC_DIR)"/test/rostest_px4_run.sh $(TEST_FILE) mission:=$(TEST_MISSION) vehicle:=$(TEST_VEHICLE)
|
|
|
|
tests_mission_coverage:
|
|
@$(MAKE) clean
|
|
@$(MAKE) --no-print-directory px4_sitl_default PX4_CMAKE_BUILD_TYPE=Coverage
|
|
@$(MAKE) --no-print-directory px4_sitl_default sitl_gazebo-classic PX4_CMAKE_BUILD_TYPE=Coverage
|
|
@"$(SRC_DIR)"/test/rostest_px4_run.sh mavros_posix_test_mission.test mission:=VTOL_mission_1 vehicle:=standard_vtol
|
|
@$(MAKE) --no-print-directory px4_sitl_default generate_coverage
|
|
|
|
tests_offboard: rostest
|
|
@"$(SRC_DIR)"/test/rostest_px4_run.sh mavros_posix_tests_offboard_attctl.test
|
|
@"$(SRC_DIR)"/test/rostest_px4_run.sh mavros_posix_tests_offboard_posctl.test
|
|
@"$(SRC_DIR)"/test/rostest_px4_run.sh mavros_posix_tests_offboard_rpyrt_ctl.test
|
|
|
|
python_coverage:
|
|
@mkdir -p "$(SRC_DIR)"/build/python_coverage
|
|
@cd "$(SRC_DIR)"/build/python_coverage && cmake "$(SRC_DIR)" $(CMAKE_ARGS) -G"$(PX4_CMAKE_GENERATOR)" -DCONFIG=px4_sitl_default -DPYTHON_COVERAGE=ON
|
|
@$(PX4_MAKE) -C "$(SRC_DIR)"/build/python_coverage
|
|
@$(PX4_MAKE) -C "$(SRC_DIR)"/build/python_coverage metadata_airframes
|
|
@$(PX4_MAKE) -C "$(SRC_DIR)"/build/python_coverage metadata_parameters
|
|
#@$(PX4_MAKE) -C "$(SRC_DIR)"/build/python_coverage module_documentation # TODO: fix within coverage.py
|
|
@coverage combine `find . -name .coverage\*`
|
|
@coverage report -m
|
|
|
|
|
|
# static analyzers (scan-build, clang-tidy, cppcheck)
|
|
# --------------------------------------------------------------------
|
|
.PHONY: scan-build px4_sitl_default-clang px4_sitl_default-clang-test clang-tidy clang-tidy-fix
|
|
.PHONY: cppcheck shellcheck_all validate_module_configs
|
|
|
|
scan-build:
|
|
@export CCC_CC=clang
|
|
@export CCC_CXX=clang++
|
|
@rm -rf "$(SRC_DIR)"/build/px4_sitl_default-scan-build
|
|
@rm -rf "$(SRC_DIR)"/build/scan-build/report_latest
|
|
@mkdir -p "$(SRC_DIR)"/build/px4_sitl_default-scan-build
|
|
@cd "$(SRC_DIR)"/build/px4_sitl_default-scan-build && scan-build cmake "$(SRC_DIR)" -GNinja -DCONFIG=px4_sitl_default
|
|
@scan-build -o "$(SRC_DIR)"/build/scan-build cmake --build "$(SRC_DIR)"/build/px4_sitl_default-scan-build
|
|
@find "$(SRC_DIR)"/build/scan-build -maxdepth 1 -mindepth 1 -type d -exec cp -r "{}" "$(SRC_DIR)"/build/scan-build/report_latest \;
|
|
|
|
px4_sitl_default-clang:
|
|
@mkdir -p "$(SRC_DIR)"/build/px4_sitl_default-clang
|
|
@cd "$(SRC_DIR)"/build/px4_sitl_default-clang && cmake "$(SRC_DIR)" $(CMAKE_ARGS) -G"$(PX4_CMAKE_GENERATOR)" -DCONFIG=px4_sitl_default -DCMAKE_C_COMPILER=clang -DCMAKE_CXX_COMPILER=clang++
|
|
@$(PX4_MAKE) -C "$(SRC_DIR)"/build/px4_sitl_default-clang
|
|
|
|
# Clang SITL configure with BUILD_TESTING=ON so test files land in
|
|
# compile_commands.json with resolved gtest/fuzztest includes. Used by CI
|
|
# to produce a compilation database for diff-based clang-tidy that can
|
|
# lint test files. Configure only: we don't build the test binaries here,
|
|
# just generate the database.
|
|
px4_sitl_default-clang-test:
|
|
@mkdir -p "$(SRC_DIR)"/build/px4_sitl_default-clang-test
|
|
@cd "$(SRC_DIR)"/build/px4_sitl_default-clang-test && cmake "$(SRC_DIR)" $(CMAKE_ARGS) -G"$(PX4_CMAKE_GENERATOR)" -DCONFIG=px4_sitl_default -DCMAKE_C_COMPILER=clang -DCMAKE_CXX_COMPILER=clang++ -DCMAKE_TESTING=ON
|
|
|
|
# Paths to exclude from clang-tidy (auto-generated from .gitmodules + manual additions):
|
|
# - All submodules (external code we consume, not edit)
|
|
# - Test code (allowed looser style)
|
|
# - Example code (educational, not production)
|
|
# - Vendored third-party code (e.g., CMSIS_5)
|
|
# - NuttX-only drivers excluded at CMake level (mcp_common); I2C-dependent libs excluded here (smbus)
|
|
# - GPIO excluded here (NuttX platform headers)
|
|
# - Emscripten failsafe web build: source path + Unity build path (failsafe_test.dir)
|
|
# because CMake Unity Builds merge sources into a generated .cxx under build/
|
|
#
|
|
# To add manual exclusions, append to CLANG_TIDY_EXCLUDE_EXTRA below.
|
|
# Submodules are automatically excluded - no action needed when adding new ones.
|
|
CLANG_TIDY_SUBMODULES := $(shell git config --file .gitmodules --get-regexp path | awk '{print $$2}' | tr '\n' '|' | sed 's/|$$//')
|
|
CLANG_TIDY_EXCLUDE_EXTRA := src/systemcmds/tests|src/examples|src/modules/gyro_fft/CMSIS_5|src/lib/drivers/smbus|src/drivers/gpio|src/modules/commander/failsafe/emscripten|failsafe_test\.dir|\.pb\.cc
|
|
CLANG_TIDY_EXCLUDE := $(CLANG_TIDY_SUBMODULES)|$(CLANG_TIDY_EXCLUDE_EXTRA)
|
|
|
|
clang-tidy: px4_sitl_default-clang
|
|
@cd "$(SRC_DIR)"/build/px4_sitl_default-clang && "$(SRC_DIR)"/Tools/run-clang-tidy.py -header-filter=".*\.hpp" -j$(j_clang_tidy) -exclude="$(CLANG_TIDY_EXCLUDE)" -p .
|
|
|
|
# to automatically fix a single check at a time, eg modernize-redundant-void-arg
|
|
# % run-clang-tidy-4.0.py -fix -j4 -checks=-\*,modernize-redundant-void-arg -p .
|
|
clang-tidy-fix: px4_sitl_default-clang
|
|
@cd "$(SRC_DIR)"/build/px4_sitl_default-clang && "$(SRC_DIR)"/Tools/run-clang-tidy.py -header-filter=".*\.hpp" -j$(j_clang_tidy) -exclude="$(CLANG_TIDY_EXCLUDE)" -fix -p .
|
|
|
|
# TODO: Fix cppcheck errors then try --enable=warning,performance,portability,style,unusedFunction or --enable=all
|
|
cppcheck: px4_sitl_default
|
|
@mkdir -p "$(SRC_DIR)"/build/cppcheck
|
|
@cppcheck -i"$(SRC_DIR)"/src/examples --enable=performance --std=c++14 --std=c99 --std=posix --project="$(SRC_DIR)"/build/px4_sitl_default/compile_commands.json --xml-version=2 2> "$(SRC_DIR)"/build/cppcheck/cppcheck-result.xml > /dev/null
|
|
@cppcheck-htmlreport --source-encoding=ascii --file="$(SRC_DIR)"/build/cppcheck/cppcheck-result.xml --report-dir="$(SRC_DIR)"/build/cppcheck --source-dir="$(SRC_DIR)"/src/
|
|
|
|
shellcheck_all:
|
|
@"$(SRC_DIR)"/Tools/run-shellcheck.sh "$(SRC_DIR)"/ROMFS/px4fmu_common/
|
|
@make px4_fmu-v5_default shellcheck
|
|
|
|
validate_module_configs:
|
|
@find "$(SRC_DIR)"/src/modules "$(SRC_DIR)"/src/drivers "$(SRC_DIR)"/src/lib -name *.yaml -type f \
|
|
-not -path "$(SRC_DIR)/src/lib/mixer_module/*" \
|
|
-not -path "$(SRC_DIR)/src/modules/uxrce_dds_client/dds_topics.yaml" \
|
|
-not -path "$(SRC_DIR)/src/modules/zenoh/dds_topics.yaml" \
|
|
-not -path "$(SRC_DIR)/src/modules/zenoh/zenoh-pico/*" \
|
|
-not -path "$(SRC_DIR)/src/lib/events/libevents/*" \
|
|
-not -path "$(SRC_DIR)/src/lib/cdrstream/*" \
|
|
-not -path "$(SRC_DIR)/src/lib/crypto/libtommath/*" \
|
|
-not -path "$(SRC_DIR)/src/lib/tensorflow_lite_micro/*" -print0 | \
|
|
xargs -0 "$(SRC_DIR)"/Tools/validate_yaml.py --schema-file "$(SRC_DIR)"/validation/module_schema.yaml
|
|
|
|
# Cleanup
|
|
# --------------------------------------------------------------------
|
|
.PHONY: clean submodulesclean submodulesupdate distclean
|
|
|
|
clean:
|
|
@[ ! -d "$(SRC_DIR)/build" ] || find "$(SRC_DIR)/build" -mindepth 1 -maxdepth 1 -type d -exec sh -c "echo {}; cmake --build {} -- clean || rm -rf {}" \; # use generated build system to clean, wipe build directory if it fails
|
|
@git submodule foreach git clean -dX --force # some submodules generate build artifacts in source
|
|
@# Remove orphaned autogenerated Kconfig left by app dirs deleted in a NuttX apps upgrade
|
|
@# (untracked, so they survive 'git clean -dX' and break 'make olddefconfig').
|
|
@cmake -P "$(SRC_DIR)/platforms/nuttx/NuttX/tools/prune_stale_apps_kconfig.cmake"
|
|
|
|
submodulesclean:
|
|
@git submodule foreach --quiet --recursive git clean -ff -x -d
|
|
@git submodule update --quiet --init --recursive --force || true
|
|
@git submodule sync --recursive
|
|
@git submodule update --init --recursive --force --jobs 4
|
|
|
|
submodulesupdate:
|
|
@git submodule update --quiet --init --recursive --jobs 4 || true
|
|
@git submodule sync --recursive
|
|
@git submodule update --init --recursive --jobs 4
|
|
@git fetch --all --tags --recurse-submodules=yes --jobs=4
|
|
|
|
distclean:
|
|
@git submodule deinit --force $(SRC_DIR)
|
|
@rm -rf "$(SRC_DIR)/build"
|
|
@git clean --force -X "$(SRC_DIR)/msg/" "$(SRC_DIR)/platforms/" "$(SRC_DIR)/posix-configs/" "$(SRC_DIR)/ROMFS/" "$(SRC_DIR)/src/" "$(SRC_DIR)/test/" "$(SRC_DIR)/Tools/"
|
|
|
|
# Help / Error / Misc
|
|
# --------------------------------------------------------------------
|
|
|
|
# All other targets are handled by PX4_MAKE. Add a rule here to avoid printing an error.
|
|
%:
|
|
$(if $(filter $(FIRST_ARG),$@), \
|
|
$(error "Make target $@ not found. It either does not exist or $@ cannot be the first argument. Use '$(MAKE) list_config_targets' to get a list of all possible [configuration] targets."),@#)
|
|
|
|
# Print a list of non-config targets (based on http://stackoverflow.com/a/26339924/1487069)
|
|
help:
|
|
@echo "Usage: $(MAKE) <target>"
|
|
@echo "Where <target> is one of:"
|
|
@$(MAKE) -pRrq -f $(lastword $(MAKEFILE_LIST)) : 2>/dev/null | \
|
|
awk -v RS= -F: '/(^|\n)# Files(\n|$$)/,/(^|\n)# Finished Make data base/ {if ($$1 !~ "^[#.]") {print $$1}}' | sort | \
|
|
egrep -v -e '^[^[:alnum:]]' -e '^($(subst $(space),|,$(ALL_CONFIG_TARGETS)))$$' -e '_default$$' -e '^(Makefile)'
|
|
@echo
|
|
@echo "Or, $(MAKE) <config_target> [<make_target(s)>]"
|
|
@echo "Use '$(MAKE) list_config_targets' for a list of configuration targets."
|
|
|
|
# Print a list of all config targets.
|
|
list_config_targets:
|
|
@for targ in $(patsubst %_default,%[_default],$(ALL_CONFIG_TARGETS)); do echo $$targ; done
|
|
|
|
.PHONY: check_nuttx check_linux check_px4 check_nxp
|
|
check_nuttx : $(call make_list,nuttx) \
|
|
sizes
|
|
|
|
check_linux : $(call make_list,linux) \
|
|
sizes
|
|
|
|
check_px4: $(call make_list,nuttx,"px4") \
|
|
sizes
|
|
|
|
check_nxp: $(call make_list,nuttx,"nxp") \
|
|
sizes
|
|
|
|
# helpers for running olddefconfig (nuttx) and px4_savedefconfig on all boards
|
|
.PHONY: all_oldconfig all_px4_savedefconfig
|
|
all_oldconfig:
|
|
@for targ in $(ALL_CONFIG_TARGETS); do $(MAKE) $$targ oldconfig; done
|
|
|
|
all_px4_savedefconfig:
|
|
@for targ in $(ALL_CONFIG_TARGETS); do $(MAKE) $$targ px4_savedefconfig; done
|
|
|
|
.PHONY: failsafe_web run_failsafe_web_server
|
|
failsafe_web:
|
|
@if ! command -v emcc; then echo -e "Install emscripten first: https://emscripten.org/docs/getting_started/downloads.html\nAnd source the env: source <path>/emsdk_env.sh"; exit 1; fi
|
|
@$(MAKE) --no-print-directory px4_sitl_default failsafe_test parameters_xml \
|
|
PX4_CMAKE_BUILD_TYPE=Release BUILD_DIR_SUFFIX=_failsafe_web \
|
|
CMAKE_ARGS="-DCMAKE_CXX_COMPILER=em++ -DCMAKE_C_COMPILER=emcc"
|
|
run_failsafe_web_server: failsafe_web
|
|
@cd build/px4_sitl_default_failsafe_web && \
|
|
python3 -m http.server
|
|
|
|
# Generate reference documentation for uORB messages
|
|
.PHONY: msg_docs
|
|
msg_docs:
|
|
$(call colorecho,'Generating uORB message reference docs')
|
|
@mkdir -p build/msg_docs
|
|
@./Tools/msg/generate_msg_docs.py -d build/msg_docs
|