mirror of
https://github.com/PX4/PX4-Autopilot.git
synced 2026-11-22 22:31:04 +08:00
34 lines
2.0 KiB
Plaintext
34 lines
2.0 KiB
Plaintext
# Setpoint configuration message
|
|
#
|
|
# Published by external modes and PX4 will respond with SetpointConfigReply.
|
|
|
|
uint32 MESSAGE_VERSION = 0
|
|
|
|
uint64 timestamp # [us] Time since system start
|
|
|
|
uint16 TYPE_INVALID = 0
|
|
uint16 TYPE_DIRECT_ACTUATORS = 1 # ActuatorMotors and ActuatorServos
|
|
uint16 TYPE_MULTICOPTER_GOTO = 2 # GotoSetpoint
|
|
uint16 TYPE_FIXEDWING_LATERAL_LONGITUDINAL = 3 # FixedWingLateralSetpoint and FixedWingLongitudinalSetpoint
|
|
uint16 TYPE_TRAJECTORY = 4 # TrajectorySetpoint
|
|
uint16 TYPE_RATES = 5 # VehicleRatesSetpoint
|
|
uint16 TYPE_ATTITUDE = 6 # VehicleAttitudeSetpoint
|
|
uint16 TYPE_SURFACE_VEHICLE_POSITION = 7 # SurfaceVehiclePositionSetpoint
|
|
uint16 TYPE_SURFACE_VEHICLE_SPEED_ATTITUDE = 8 # SurfaceVehicleSpeedSetpoint and SurfaceVehicleAttitudeSetpoint
|
|
uint16 TYPE_SURFACE_VEHICLE_SPEED_RATE = 9 # SurfaceVehicleSpeedSetpoint and SurfaceVehicleRateSetpoint
|
|
uint16 TYPE_SURFACE_VEHICLE_SPEED_STEERING = 10 # SurfaceVehicleSpeedSetpoint and SurfaceVehicleSteeringSetpoint
|
|
uint16 TYPE_ROVER_THROTTLE_ATTITUDE = 11 # RoverThrottleSetpoint and SurfaceVehicleAttitudeSetpoint
|
|
uint16 TYPE_ROVER_THROTTLE_RATE = 12 # RoverThrottleSetpoint and SurfaceVehicleRateSetpoint
|
|
uint16 TYPE_ROVER_THROTTLE_STEERING = 13 # RoverThrottleSetpoint and SurfaceVehicleSteeringSetpoint
|
|
uint16 TYPE_TRAJECTORY_6DOF = 14 # TrajectorySetpoint6dof
|
|
uint16 TYPE_THRUST_AND_TORQUE = 15 # VehicleThrustSetpoint and VehicleTorqueSetpoint
|
|
uint16 TYPE_POSITION_TRIPLET = 16 # PositionSetpointTriplet
|
|
|
|
uint16 type # [@enum TYPE] setpoint type (corresponding to one or more setpoint messages)
|
|
|
|
uint8 source_id # nav_state of the mode
|
|
|
|
bool should_apply # if true: apply as current setpoint configuration (mode should be active). If false: setpoint configuration is not changed (can be used to check if a setpoint can be used with the current vehicle configuration).
|
|
|
|
uint16 timeout_ms # Configure setpoint timeout. If no setpoint received for this time, PX4 triggers a failsafe. 0 disables the timeout (unresponsive modes still trigger a timeout through arming checks).
|