Only modules_main.md told readers that the module reference is generated from source. The per-category pages (modules_driver.md, modules_system.md, ...) and the per-subcategory pages (modules_driver_imu.md, ...) had no such note, so contributors kept fixing typos directly in docs/en/modules/ and the next metadata sync silently reverted them (see #29614). Emit a `::: info` block right under the H1 of every category and subcategory page. The wording follows the existing disclaimers on the airframe reference and the uORB message index: it links to the generator script and names the `make module_documentation` target. docs/en/modules/*.md are regenerated with the updated generator and run through Prettier, mirroring what the docs-orchestrator metadata sync does on main, so the diff is only the new note. Fixes #29624 Assisted-by: Claude:claude-fable-5-1 Signed-off-by: Alex E <aelejandro9@gmail.com>
7.1 KiB
Modules Reference: Airspeed Sensor (Driver)
::: info
This page is auto-generated from the source code using the build command: make module_documentation.
Do not edit it directly; fix the module documentation in the PX4-Autopilot source instead.
:::
asp5033
Source: drivers/differential_pressure/asp5033
Description
Driver to enable an external [ASP5033] (https://www.qio-tek.com/index.php/product/qiotek-asp5033-dronecan-airspeed-and-compass-module/) TE connected via I2C. This is not included by default in firmware. It can be included with terminal command: "make <your_board> boardconfig" or in default.px4board with adding the line: "CONFIG_DRIVERS_DIFFERENTIAL_PRESSURE_ASP5033=y" It can be enabled with the "SENS_EN_ASP5033" parameter set to 1.
Usage
asp5033 <command> [arguments...]
Commands:
start
[-I] Internal I2C bus(es) (onboard sensors; shared bus only if -b is
given)
[-X] External I2C bus(es) (connector sensors, including shared
buses)
[-b <val>] board-specific bus (default=all) (external SPI: n-th bus
(default=1))
[-f <val>] bus frequency in kHz
[-q] quiet startup (no message if no device found)
[-a <val>] I2C address
default: 109
stop
status print status info
auav
Source: drivers/differential_pressure/auav
Usage
auav <command> [arguments...]
Commands:
start
[-D] Differential pressure sensing
[-A] Absolute pressure sensing
[-I] Internal I2C bus(es) (onboard sensors; shared bus only if -b is
given)
[-X] External I2C bus(es) (connector sensors, including shared
buses)
[-b <val>] board-specific bus (default=all) (external SPI: n-th bus
(default=1))
[-f <val>] bus frequency in kHz
[-q] quiet startup (no message if no device found)
[-a <val>] I2C address
default: 38
stop
status print status info
dlvr
Source: drivers/differential_pressure/dlvr
Description
I2C driver for Amphenol All Sensors Digital Low Voltage R-Series (DLVR) pressure sensors (continuous-sampling variants only).
The driver is enabled for specific sensor-variants using the parameter "SENS_EN_DLVR".
Usage
dlvr <command> [arguments...]
Commands:
start
[-I] Internal I2C bus(es) (onboard sensors; shared bus only if -b is
given)
[-X] External I2C bus(es) (connector sensors, including shared
buses)
[-b <val>] board-specific bus (default=all) (external SPI: n-th bus
(default=1))
[-f <val>] bus frequency in kHz
[-q] quiet startup (no message if no device found)
[-a <val>] I2C address
default: 40
stop
status print status info
ets_airspeed
Source: drivers/differential_pressure/ets
Usage
ets_airspeed <command> [arguments...]
Commands:
start
[-I] Internal I2C bus(es) (onboard sensors; shared bus only if -b is
given)
[-X] External I2C bus(es) (connector sensors, including shared
buses)
[-b <val>] board-specific bus (default=all) (external SPI: n-th bus
(default=1))
[-f <val>] bus frequency in kHz
[-q] quiet startup (no message if no device found)
[-a <val>] I2C address
default: 117
stop
status print status info
ms4515
Source: drivers/differential_pressure/ms4515
Usage
ms4515 <command> [arguments...]
Commands:
start
[-I] Internal I2C bus(es) (onboard sensors; shared bus only if -b is
given)
[-X] External I2C bus(es) (connector sensors, including shared
buses)
[-b <val>] board-specific bus (default=all) (external SPI: n-th bus
(default=1))
[-f <val>] bus frequency in kHz
[-q] quiet startup (no message if no device found)
[-a <val>] I2C address
default: 70
stop
status print status info
ms4525do
Source: drivers/differential_pressure/ms4525do
Usage
ms4525do <command> [arguments...]
Commands:
start
[-I] Internal I2C bus(es) (onboard sensors; shared bus only if -b is
given)
[-X] External I2C bus(es) (connector sensors, including shared
buses)
[-b <val>] board-specific bus (default=all) (external SPI: n-th bus
(default=1))
[-f <val>] bus frequency in kHz
[-q] quiet startup (no message if no device found)
[-a <val>] I2C address
default: 40
stop
status print status info
ms5525dso
Source: drivers/differential_pressure/ms5525dso
Usage
ms5525dso <command> [arguments...]
Commands:
start
[-I] Internal I2C bus(es) (onboard sensors; shared bus only if -b is
given)
[-X] External I2C bus(es) (connector sensors, including shared
buses)
[-b <val>] board-specific bus (default=all) (external SPI: n-th bus
(default=1))
[-f <val>] bus frequency in kHz
[-q] quiet startup (no message if no device found)
[-a <val>] I2C address
default: 118
stop
status print status info
sdp3x
Source: drivers/differential_pressure/sdp3x
Usage
sdp3x <command> [arguments...]
Commands:
start
[-I] Internal I2C bus(es) (onboard sensors; shared bus only if -b is
given)
[-X] External I2C bus(es) (connector sensors, including shared
buses)
[-b <val>] board-specific bus (default=all) (external SPI: n-th bus
(default=1))
[-f <val>] bus frequency in kHz
[-q] quiet startup (no message if no device found)
[-a <val>] I2C address
default: 33
[-k] if initialization (probing) fails, keep retrying periodically
stop
status print status info