Files
PX4-Autopilot/msg/FailureDetectorStatus.msg
T
Matthias Grob 7f83c28400 feat(failure_detector)!: check tilt instead of roll and pitch separately
Checking roll and pitch against separate limits misses a combined
tilt: 45° roll with 45° pitch is a 60° tilt but stays below both
default 60° limits. Euler angles are also unreliable near 90° pitch
and when inverted.

FD_FAIL_R and FD_FAIL_R_TTRI now set the maximum tilt and its trigger
time. FD_FAIL_P and FD_FAIL_P_TTRI are removed without migration
(see the Upgrade Guide). The check is disabled with -1; 0 still
disables it for existing setups. In FailureDetectorStatus, fd_roll
and fd_pitch are replaced by fd_tilt.
2026-11-18 11:02:27 +01:00

15 lines
491 B
Plaintext

uint64 timestamp # time since system start (microseconds)
# FailureDetector status
bool fd_tilt
bool fd_alt
bool fd_ext
bool fd_arm_escs
bool fd_battery
bool fd_imbalanced_prop
bool fd_motor
float32 imbalanced_prop_metric # Metric of the imbalanced propeller check (low-passed)
uint16 motor_failure_mask # Bit-mask with motor indices, indicating critical motor failures
uint16 motor_stop_mask # Bitmaks of motors stopped by failure injection